salva FCL-20 Lverpan Retarder Prover Owner’s Manual
- August 5, 2024
- salva
Table of Contents
salva FCL-20 Lverpan Retarder Prover
Specifications
- Capacity: 20 trays of 80 x 40 or 80 x 46 cm
- Refrigerant: R134 A fluid refrigerator (does not damage the ozone layer)
- Working Temperature: Not specified
- Insulation: 60 mm thickness on walls, 40 mm on the floor
- Cooling Power/Capacity: 1.476 kW or 1.593 kW (50 Hz or 60 Hz)
- Dimensions:
- A: 987 mm
- B: 180 mm
- C: 600 mm
- D: 1620 mm
- H: 2187 mm
- Weight: 309 kg
Product Usage Instructions
Operation
To start using the Salva Frio FLC-20, follow these steps:
- Ensure the equipment is properly connected to water supply, drainage, and electric power.
- Open the door using the electromagnetic closure managed from the control panel.
- Load the trays with your bakery products for fermentation.
- Select the desired fermentation mode (retarded or direct) using the Control Panel FC-Touch.
- Monitor the fermentation process through the reflectors and ensure optimum air distribution.
- When fermentation is complete, safely remove your products from the equipment.
FAQ
Q: What is the refrigerant used in the Salva Frio FLC-20?
A: The refrigerant used is R134 A fluid refrigerator, which is
environmentally friendly and does not harm the ozone layer.
SALVA FRIO FLC-20
The range of retarded proofers SALVA IVERPAN, for trays, is recognized as
an indispensable equipment in bakeries and bake offs around the world.
CHARACTERISTICS
Multipurpose
It is easy to install and has the ability to develop retarded or direct
fermentation.
Optimum air distribution
Provided by the reflectors located in the posterior region of the cabinet,
trying carefully to the most sensitive products.
Safety
Door with electromagnetic closure, managed from the control panel with manual
safety opening in the outside and inside.
Compact and modern design Frontal cooling
This characteristic allows the placing of multiple ma-chines next to each
other without the need of leaving an space between them.
Control Panel FC-Touch
Equipped with the most advanced software can be adapted to the needs of the
user.
Condensate collecting tray
Prevents the condensate of the inside of the door from falling to the floor.
FCL-20 DETAILS AND COMPOSITION
Capacity
20 trays of 80 x 40 or 80 x 46 cm.
R134 A fluid refrigerator.
This refrigerant does not damage the ozone layer.
Working temperature
Between -2ºC and 40ºC to adapt to its different uses.
Insulation
With a 60 mm thickness on the walls and 40 mm on the floor.
Technical data FCL-20
| kW | V | A | Hz |
|---|---|---|---|
| 1.8 (I+N+T) | 230 | 9 | 50 |
| 1.8 (I+N+T) | 230 | 9.5 | 60 |
Cooling power/capacity: 1.476 kW or 1.593 kW (50 Hz or 60 Hz)
GENERAL DIMENSIONS
FCL-20
| | A| B| C| D| H| Weight
---|---|---|---|---|---|---|---
| 987 mm| 180 mm| 600 mm| 1620 mm| 2187 mm|
309 kg
INSTALLATIONS IN DETAIL
Water supply
Network with maximum pressure intake between 1-1,5 kg/cm2. It is necessary to
set manual key between the connection of the IVERPAN and the general water
supply (rubber tube provided by SALVA).
Drainage
The drain connection from the IVERPAN to the premises is done by 20 mm
diameter rubber tube.
Electric power supply
The electrical connection should be performed by authorized professionals,
following the rules in force in each country.
| Location (mm) | X | Y | Z |
|---|---|---|---|
| Water supply (1) | 293 | 472 | 2073 |
| Drainage (2) | 300 | 0 | 1857 |
| Electric supply (3) | 103 | 1074 | 2170 |
SALVA INDUSTIARIAL S.A.
Poligono 107, GI-636, Km 6 E-20.100 Lezo (Guipuzkoa)
Tel: +34 943 449 300
Fax: +34 943 449 329
Email: salva@salva.es
Email Export: sales@salva.es
Website: www.salva.es