La Crosse Technology 331-1409 Wireless Pool Thermometer User Manual

La Crosse Technology 331-1409 Wireless Pool Thermometer User Manual

SPECIFICATIONS

• Pool Sensor (LTV-POOL):
  • Temperature Range : 50°F to 122°F (Fahrenheit only)
  • Transmission Range: Over 330 ft. (100 meters) RF 915MHz (open air)
  • Transmission Interval: About every 60 seconds (samples every 30 seconds)
  • Power : 2-AA, IEC, LR6 batteries (not included)
  • Battery Life: Over 24 months
  • Dimensions: 6.67‘’ L x 3.87’’ W x 4.18’’ H (16.95cm L x 9.84cm W x 10.61cm H)
• Pool Station (331-1409):
  • Temperature Range: 32°F to 122°F (0ºC to 50ºC)
  • Humidity Range: 10% to 99% RH
  • Power: 2-AA, IEC, LR6 batteries (not included)
  • Battery Life: Over 12 months
  • Dimensions: 3.55” L x 1.19” W x 3.35” H (9.02cm L x 3.02cm W x 8.52cm H)

POWER UP

1. Insert 2-AA batteries into the Pool Sensor’s Battery Compartment. Securely reattach the twist-on Battery Cover, ensuring the lines meet correctly to prevent water from entering.
2. Insert 2-AA batteries into the Pool Station.
3. Configure Basic Settings.
4. Once the sensor is reading to your pool station you can place it in your pool.

SETTINGS

1. Hold the HI/LO button to enter the Settings Menu.
2. Press the + or – button to adjust values.
3. Press the HI/LO button to confirm, move to the next item or exit.

Settings Menu Order:

• 12/24 Hour Format
• Hour
• Minutes
• Fahrenheit/Celsius

BUTTON FUNCTIONS

VIEW INDOOR TEMPERATURE/HUMIDITY

• Press the button to toggle between Indoor Temperature and Indoor Humidity readings, or activate Auto-Scroll.
• When the Auto-Scroll Icon appears in the bottom right corner, the display will switch between these readings every 5 seconds.

ADD-ON TEMPERATURE/HUMIDITY SENSOR
To add an add-on sensor (sold separately) to this 331-1409 display:

1. Insert 2-AA batteries into the new TH sensor.
2. Hold the button to search for the sensor.
3. Press the TX button on the sensor to force a signal.

• The Pool Icon shows when pool sensor is displayed.
• The Sensor Icon shows when the add-on sensor is displayed.

HI/LO TEMPERATURE AND HUMIDTY READINGS

• Press the HI/LO button to view HI and LO records.
• The HI/LO Record from the pool sensor are constantly displayed.
• The records will reset automatically each day at midnight.
• To manually reset the HI/LO records press the HI/LO button to view the records. Then hold the (-) MINUS button to reset each record individually when viewed.

CONNECT TO LA CROSSE VIEW™ APP

If you already own a La Crosse View connected display, you can use your La Crosse View app to monitor your Pool Sensor’s readings, as well as set temperature alerts right on your phone.

1. Open your La Crosse View app and select ADD DEVICES from the main menu.
2. Scan the Bar Code or type in the Device ID on the side of the Battery Compartment.
3. Give the device a Name and Location, and press Save.

Within the next few minutes, you should begin seeing your Pool Sensor’s data within your app.

Note : The LTV-POOL sensor is fully functional without being connected to the La Crosse View app.

LOW BATTERY INDICATORS

• When a Low Battery Indicator appears by the time, replace the batteries in the Pool Station
• When a Low Battery Indicator appears by the Pool Sensor, replace the batteries in the Pool Sensor.

CARE + MAINTENANCE

• Do not mix old and new batteries.
• Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
• Always purchase the correct size and grade of battery most suitable for intended use.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries have with correct polarity (+ / -).
• Remove batteries from equipment that will not to be used for an extended period.
• Promptly remove expired batteries

WARNING : This product can expose you to chemicals including styrene, which is known to the State of California to cause cancer.

For more information go to: www.P65Warnings.ca.gov

WE’RE HERE TO HELP
If you require additional support, get in touch with our friendly customer support team based out of La Crosse, Wisconsin.

• Phone : 1.844.200.8752
• Online : bit.ly/contact_techsupport

Our knowledgeable customer support team is available: Monday-Friday, 8am- 6pm CST.

JOIN THE CONVERSATION
Ask questions, watch detailed setup videos, and provide feedback on our social media outlets!

• Model : 331-1409/331-09667
• DC :091021

For more product information visit : bit.ly/laxtech_support

Download PDF:La Crosse Technology 331-1409 Wireless Pool Thermometer User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>