SATECHI Thunderbolt 4 Slim Hub Pro User Guide
- August 4, 2024
- SATECHI
Table of Contents
SATECHI Thunderbolt 4 Slim Hub Pro
INSTALLATION
-
Connect the power adapter from the Hub’s DC port directly to a wall outlet.
When connected to power, the LED will light up orange until the host device is connected.
-
Using the included Thunderbolt 4 cable, connect the hub to your host device from its Thunderbolt 4 host port located at the front of the hub. Once the host device is connected, the LED color will change to green. Features 96W max pass-through charging to the host device.
-
Connect up to three USB-C devices to the hub’s Thunderbolt 4 ports. Supports up to 40Gbps, 15W charging, dual 4K video output up to 60Hz total or single 8K video output at 30Hz. macOS doesn’t support 8K video output.
-
USB 3.2 Gen 2 port allows for transfer data at up to 10Gbps speed. Does not support charging or Apple SuperDrive.
-
Allows for daisy-chaining up to 6 devices
a. Can connect USB-C to HDMI adapter / cable for HDMI support
b. Can connect USB-C to DisplayPort adapter / cable for DisplayPort
support
c. Can connect to other adapters and hubs for more port connectivity
Disclaimer: macOS 11 or higher required when using with Macs
Documents / Resources
|
SATECHI Thunderbolt 4 Slim Hub
Pro
[pdf] User Guide
Thunderbolt 4 Slim Hub Pro, Thunderbolt, 4 Slim Hub Pro, Hub Pro
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>