Yealink UVC84 4K PTZ Camera Installation Guide

August 3, 2024
Yealink

Yealink UVC84 4K PTZ Camera

Package Contents

TIP
For the UVC84 unboxing video, and please refer to UVC84.
We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may result in poor performance.

Install UVC84

Put on a Flat Surface
You can put the UVC84 on the conference table, and make sure that the angle of inclination of the UVC84 is not more than 5 degrees to ensure proper operation.

Mount on top of a display
Choose the following installation method when the thickness of the TV is between 0mm and 70mm.

Choose the following installation method when the thickness of the TV is between 46 mm and 146 mm.

Mount on the Wall
The recommended height is 1.55 m-1.85 m above the ground.

Mount on the Ceiling

Mount onto a TV Mount

Hardware Interface

No. Item Description
1 DC48V Connect to a power adapter.
2 VCH In MVC system, connect to audio device (for example: VCM34).
3 Video Out Connect to a PC as video output.
--- --- ---
4 USB Insert DD10 to connect to CPW90.
5 Line Out Connect to an audio output device using an audio cable (3.5mm).

6

| Security slot| Connect a universal security cable to the UVC84 so that you can lock the UVC84 down.

Connect UVC84

Connect to PC

Connect to the video conference system

NOTE
Not included accessories requirements:

  • Display: Resolution of 1080p or higher and with an HDMI port.
  • Ethernet cable: CAT5e or higher ethernet cable.
  • PoE switch: If you use PoE to connect cameras, you need to use PoE+.
  • PC: Equipped with HDMI or USB-C (support DP protocol) Port.

LED Indicator

LED Status Description
Off The UVC84 is powered off.
Solid green The UVC84 is active.
Solid red The UVC84 is in sleep mode.
Flash red The UVC84 is in recovery mode.
Flash yellow The UVC84 is upgrading firware.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals