MAXIM LIGHTING 10237GY Prime Acoustic 25 Inch LED Flush Mount Instruction Manual
- August 5, 2024
- MAXIM LIGHTING
Table of Contents
MAXIM LIGHTING 10237GY Prime Acoustic 25 Inch LED Flush Mount Instruction
Manual
Item/Model Number: 10237GY
Prime Acoustic 25″ LED Flush Mount 120-277V
Lamping I Ampoule: 1 x LED 32W (Included)
Please consult a qualified electrician prior to install
Made in China.
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to install it.
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
- Risk of suffocation!
- Keep packaging materials away from children.
Lamp Care Instructions
- Carefully read through the instruction sheet before assembly and using the product.
- Caution there is a risk of shock!
- Disconnect from power source before assembling or cleaning.
- Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
- Check the product cord to be sure is free torn or frayed.
Cleaning & Maintenance
On polished finishes, often using talc powder can reduce the appearance of
fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, i.e. glass
cleaner, stone polish, & wood polish.
Clean with soft cloth and a mild detergent. Do not use abrasive or harsh
cleaners.
Periodically (every 90-180 days) make sure that the screws are fully
tightened.
Prolonged exposure to heat sources may cause glazing, melting and scorching,
or even cause color to fade.
PARTS
Before getting,started,ensure the package contains the following components:
This fixture is equipped with an LED driver, please refer to the Wiring Diagram for more details
WIRING DIAGRAM
MUST be installed by an experienced professional
CRITICAL KNOWLEDGE of electronic lighting systems required
IMPROPER WIRING and/or INCORRECT DIMMER use can cause CATASTROPHIC DAMAGE!
THIS FIXTURE MUST BE INSTALLED with a COMPATIBLE DIMMER SWITCH
DO NOT CUT FACTORY-MADE CONNECTIONS.
SCHEMATIC
FOR GENERAL REFERENCE ONLY
VERIFIED LIST OF TESTED DIMMERS
Manufacturer Part Number
Lutron Diva DVCL-153P
Lutron Skylark CTCL-153P
Lutron MACL-153P Lutron TGCL-153P
Lutron Skylark SELV-300P
Lutron Diva DVELV-300P
GENERAL COMPATIBILITY
TRIAC / FORWARD PHASE
ELV/ REVERSE PHASE
only at 120VAC
0-10V/ LOW VOLTAGE
Work at 120-277VAC
Due to inrush current, wattage should not exceeed 150W on a 600W dimmer
IMPORTANT!
If the control is not paired properly to LED fixtures, irreparable damage may
occur.
If the dimmer you are using is not listed here, consult a lighting
professional or view our Dimming Compatibility Chart online:
https://www.maximlighting.com/led-dimmer
MUST be installed by an experienced professional
CRITICAL KNOWLEDGE of electronic lighting systems required
© 2023 MAXIM LIGHTING
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>