LLURIA BS142-27 Flexible LED Strip Instruction Manual
- August 2, 2024
- LLURIA
Table of Contents
LLURIA BS142-27 Flexible LED Strip
Specifications
- Model: BS14,2
- Power: 14.2W/m
- IP Rating: IP20 (Indoor use only)
- LED Type: 2835
- LED Quantity: 60 LEDs per meter
- Lumen Output: Varies based on CCT (2700K: 1425lm/m, 3000K: 1435lm/m, 4000K: 1555lm/m, 6000K: 1620lm/m)
- Lumen/Watt Efficiency: Varies based on CCT (2700K: 100lm/W, 3000K: 101lm/W, 4000K: 109lm/W, 6000K: 114lm/W)
- CCT Options: 2700K, 3000K, 4000K, 6000K
Product Usage Instructions
- Installation:
- Ensure the surface where the LED strip will be mounted is clean and dry.
- Peel off the adhesive backing of the LED strip and carefully attach it to the desired location.
- Connect the LED strip to a compatible power source following the manufacturer’s instructions.
- For longer lengths, additional power supplies may be required based on the cable specifications provided.
- Usage Tips:
- Avoid bending the LED strip sharply to prevent damage to the components.
- Keep the LED strip away from direct contact with water or moisture to maintain longevity.
- Test the LED strip before full installation to ensure proper functionality.
FAQs
- Q: Can I cut the LED strip to a custom length?
- A: Yes, you can cut the LED strip at designated cut points for a custom fit. Be sure to follow the cutting instructions provided in the manual.
- Q: What is the maximum run length for this LED strip?
- A: The maximum run length may vary based on the power supply and cable specifications. It is recommended to consult the manual for detailed information on maximum run lengths.
Feature
Inside IP20
- Flexible LED strip with ideal for all types of installations, general and accent lighting.
- Great uniformity is achieved thanks to the small separation between the LEDs.
- For indoor use.
Technical data
- Power 14,2W/m
- Potencia rollo 5m Roll power 5m 71W
- IP 20
- CRI >90
- R9 >25
- Voltage 24V
- LED LED type 2835
- LEDs/m 60
- Pitch 16,7mm
- Beam angle 120º
- Min. cutting length 100mm
- Roll length 5/30m
- Lifetime 50.000h
- Ambient temperature -20~50ºC
- Storage temperature -40~80ºC
- Warranty years 4
- Dimmable Yes
- Needs heatsink Sí Yes
- Max. length 20m (1)
- Connected in series 20m (1)
5 MacAdam steps
CDL
Dimensions
Circuit diagram
- Respect the maximum lengths to avoid drops in voltage and variations in light intensity.
Cable section
Cable
- Distance ≤ 5m < 15m < 25m
- Section 0,50mm2 1,5mm2 2,5mm2
Distance LED – Profile
The minimum distance that should be left at the ends, both sides, between the LED strip and profile.
Assembly detail
- Do not bend de LED strip to adapt them to a sharp radius or angle, cut for the cut mark and weld a section of cable to make the turn.
Lifetime
- The lifetime of our LEDs is 50.000h at an ambient temperature of 23ºC and provided with a heat dissipation system.
- Off cycles are recommended to extend the life of the LEDs.
Warnings
- To ensure the life of the LED, it is requested to place it on a surface that dissipates the heat it generates.
- Caution when handling cables to avoid damage to the welds.
- The voltage surges can cause damage.
- If the diffuser is used with the dissipating profile, there may be variations in the color temperature.
Lluria reserves the right to modify specifications.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>