MAXIM LIGHTING 30192 Foundry 1 Light Outdoor Wall Sconce Installation Guide
- August 4, 2024
- MAXIM LIGHTING
Table of Contents
MAXIM LIGHTING 30192 Foundry 1 Light Outdoor Wall Sconce
Please consult a qualified electrician prior to install
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to install it.
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product..
Risk of suffocation!
Keep packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the product.
Caution there is a risk of shock!
Disconnect from power source before assembling or cleaning.
Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
Check the product cord to be sure is free torn or frayed.
WET LOCATION: For outdoor use, caulk around fixture with silicone sealant to prevent water intrusion. Leave a gap at the bottom to allow moisture to escape.
Cleaning & Maintenance
- On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
- Clean with soft cloth and a mild detergent .Do not use abrasive or harsh cleaners.
- Periodically (every 90-180 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
Parts
Before getting,started,ensure the package contains the following components:
A
| |
X1
---|---|---
B
|
GLS30192CD
|
X1
C
| |
X1
D
|
8-32 x 4/8″
| X4
E
|
#9-40 x 1″
|
X2
F
|
8-32 x 1″
|
X2
G
| |
X3
|
(Not included)
|
Customer Support
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>