JBL Soundgear Frames Audio Glasses User Guide
- July 31, 2024
- JBL
Table of Contents
JBL Soundgear Frames Audio Glasses
Specifications
- Model: SOUNDGEAR FRAMES
- Sensitivity: 114 dB SPL@1 kHz
- Driver size: 25 mm x 9 mm/ 0.98 x 0.35 Dynamic Driver
- Maximum SPL: 90 dB
- Power supply: 5 V 0.5 A x 2
- Microphone sensitivity: -38 dBV/Pa@1 kHz
- Material: Frame-Plastic (TR90), Hinge-metal (SUS316), Temple housing- Plastic (PC)
- Dimensions (L x W x H): 160.87 mm x 150.54 mm x 53.68 mm/ 6.33 x 5.93 x 2.11
- Weight: 52.0 g/ 0.115 lbs
- Battery type: Lithium-ion battery (110 mAh/ 3.8 V)
- Bluetooth version: 5.2
- Bluetooth transmitter frequency range:
- Bluetooth transmitter power:
Product Usage Instructions
How to Wear
Consult a professional optician if you need to replace the lens.
Power On & Connect
- Turn on the device by pressing the power button.
- Select “JBL Soundgear Frames” from the list of available Bluetooth devices on your smartphone or computer.
- If prompted, confirm the connection on both devices.
Controls
- To enable advanced controls, connect your JBL SOUNDGEAR FRAMES to the JBL Headphones app.
- To power off, press and hold the power button for 5 seconds.
Charging
Use a 5V 0.5A power supply to charge the device. The LED indicators will show different behaviors based on the charging status: BT connecting, BT connected, BT not connected, Low battery,Charging, Fully charged.
Do More with the App
Enhance your listening experience by using the JBL Headphones app for additional control and personalization features.
Frequently Asked Questions
How do I reset the device to factory settings?
To perform a manual setup or factory reset, follow these steps:
- Connect to a new Bluetooth device by accessing the Bluetooth settings on your device.
- To factory reset, press and hold both the left and right buttons for 5 seconds simultaneously.
What do the LED behaviors indicate during charging?
The LED indicators will show different behaviors to indicate the charging status:
- BT connecting: Device is attempting to connect via Bluetooth.
- BT connected: Device is successfully connected via Bluetooth.
- BT not connected: Device is not connected via Bluetooth.
- Low battery: Battery level is low and requires charging.
- Charging: Device is currently being charged.
- Fully charged: Battery is fully charged and ready for use.
WHAT’S IN THE BOX
APP
HOW TO WEAR
POWER ON & CONNECT
CONTROLS
- Enable advance controls by connecting your JBL SOUNDGEAR FRAMES to JBL Headphones app
POWER OFF
MANUAL SETUP
DO MORE WITH THE APP
CHARGING
LED BEHAVIORS
TECH SPEC
-
Model: SOUNDGEAR FRAMES
-
Driver size: 25 mm x 9 mm/ 0.98″ x 0.35″ Dynamic Driver
-
Power supply: 5 V 0.5 A x 2
-
Material: Frame-Plastic (TR90), Hinge-metal (SUS316),
-
Temple housing- Plastic (PC)
-
Dimensions (L x W x H): 160.87 mm x 150.54 mm x 53.68 mm/ 6.33″ x 5.93″ x 2.11″
-
Weight: 52.0 g/ 0.115 lbs
-
Battery type: Lithium-ion battery (110 mAh/ 3.8 V)
-
Charging time: 2 hrs from empty
-
Frequency response: 100 Hz – 18 kHz
-
Impedance: 20 ohm
-
Sensitivity: 114 dB SPL@1 kHz
-
Maximum SPL: 90 dB
-
Microphone sensitivity: -38 dBV/Pa@1 kHz
-
Bluetooth version: 5.2
-
Bluetooth transmitter
-
frequency range: 2.4 GHz – 2.4835 GHz
Bluetooth transmitter power: <12 dBm (EIRP) -
Bluetooth transmitter modulation: GFSK, π/4-DQPSK, 8DPSK
-
Maximum operation temperature: 45 °C
To protect battery lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.
warning
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS
- Description: Sunglasses for general use
- Filter Category: CAT.3
High protection against sun glare, Good UV protection
- NOT SUITABLE FOR DRIVING IN TWILIGHT OR AT NIGHT.
- Only lenses approved by Harman should be used with the Audio Frame products.
- Not for direct observation of the sun.
- Not for protection against artificial light sources, e.g. solaria.
- Not for use as eye protection against mechanical impact hazards.
- When not in use, store the product in the carry case provided
This product complies with the requirements of the European Union PPE Regulation (EU) 2016/ 425. This product complies with the EN ISO 12312-1:2013+A1:2015, BS EN ISO 12312-1:2013+A1:2015, AS/NZS 1067.1:2016, GB 39552.1-2020, ABNT NBR ISO 12312-1:2018 and CNS 15067 -2017. Instructions for storage, use and cleaning: Store in such a way as to prevent scratching of the lenses. Clean lenses with soapy water and dry with a soft cloth.
Bluetooth
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.