SURAL Parallax X User Manual
- July 31, 2024
- SURAL
Table of Contents
Parallax X
Specifications
-
Product Name: Parallax X
-
Version: 1.0.0
-
Supported Platforms: Windows and macOS
-
Storage Space Requirement: 400MB – 1GB per plugin
installed -
System Requirement: AVX support (Intel Ivy Bridge and AMD Zen
generations) -
Additional Requirement: Internet connection for license
activation
Product Usage Instructions
Getting Started
If you are new to using Neural DSP plugins, follow these steps
to get started:
Basic Requirements
-
Ensure you have 400MB – 1GB of free storage space per plugin
installed. -
Your system must support AVX. Check if your processor is from
Intel Ivy Bridge or AMD Zen generations. -
If using the Quad Cortex, it can be used as a USB audio
interface. -
An internet connection is necessary to activate your license
through iLok License Manager.
Supported DAWs
Neural DSP plugins work with various DAWs. Follow these steps to
integrate the plugin with your DAW:
-
Install the plugins to your DAW. Most DAWs automatically locate
new plugins, but you may need to manually rescan the plugin folder
if they don’t appear. -
Create a new project in your DAW, insert an audio track, arm it
for recording, and load the plugin onto the track. -
If needed, perform a custom installation to select specific
plugin formats required by your DAW.
File Locations
Neural DSP plugins will be installed in default locations unless
specified otherwise:
-
On macOS, plugins are typically located in the Library
folders. -
On Windows, ensure hidden items are visible in File Explorer to
access ProgramData and AppData folders.
Frequently Asked Questions (FAQ)
Q: What should I do if I encounter compatibility issues with my
DAW?
A: If you experience compatibility problems with your DAW,
please reach out to support@neuraldsp.com for further
assistance.
Parallax X
Version 1.0.0 for Windows and macOS User Manual
2024
Parallax X / Contents
2
Contents
Getting Started . . . . . . . . . . . 3 Basic Requirements 3 Supported DAWs 4
File Locations 5 Uninstalling Neural DSP Software 5 License Activation 6
Setting up your plugin 8
Plugin Components . . . . . . . . . 9 Channel Strip Section 10 Cab Section 13
Global Features . . . . . . . . . . 14 Section Modules 14 Global Audio
Controls 14 Preset Manager 15 Utility Bar 16 Tuner 16 Metronome 17 MIDI
Support 18
Support . . . . . . . . . . . . . . 21 Corporate Contact 21
Parallax X / Getting Started
3
02
Getting Started
New to plugins and have a lot of questions? This is your guide to the basics.
Read on to learn what you need to start using your Neural DSP plugin.
Basic Requirements
Getting set up is very simple, but there are a few things you will need before
you begin
· Electric guitar or bass The instrument you wish to use the plugin with, and
an instrument cable
· Computer Any Windows PC or Apple Mac capable of multitrack audio processing
Make sure your machine meets the minimum required specifications:
macOS minimum requirements · Intel Core i3 Processor (i3-4130 / i5-2500 or
higher) · Apple Silicon (M1 or higher) · 8GB of RAM or more · macOS 11 Big Sur
(or higher)
Windows minimum requirements · Intel Core i3 Processor (i3-4130 / i5-2500 or
higher) · AMD Quad-Core Processor (R5 2200G or higher) · 8GB of RAM or more ·
Windows 10 (or higher)
· Audio interface An audio interface is a device that connects musical
instruments and microphones to a computer via USB, Thunderbolt, or PCIe
· Studio Monitors or Headphones Once the instrument signal is being processed
by the plugin, you need to hear it Having the sound come out from the computer
speakers is not recommended due to quality and latency issues
· iLok License Manager App iLok License Manager is a free app that allows you
to manage all your plugin licenses in one place and transfer them between
different computers
400MB – 1GB of free storage space is required per plugin installed
Our latest plugins require AVX support, a feature added by Intel “Ivy Bridge”
and AMD ” Zen” generations
The Quad Cortex can be used as USB audio interface
Internet connection is required to activate your license through iLok License
Manager
Parallax X / Getting Started
Supported DAWs
DAWs, short for “Digital Audio Workstations”, are music production software
programs that have a comprehensive set of tools for recording, editing, and
mixing digital audio
All Neural DSP plugins include a standalone app version, meaning that you
don’t need a DAW to use them However, if you are planning on recording your
playing, you will need to install your plugins to your DAW
A complete installation setup will automatically install all the different
plugin formats:
· APP: Standalone app. · AU: Plugin format developed by Apple for use on
macOS. · VST2: Multi-platform format compatible across multiple DAWs on
both macOS and Windows devices · VST3: An improved version of the VST2 format
that only uses re-
sources during monitoring/playback It’s also available on both macOS and
Windows devices · AAX: Pro Tools native format. It can only be used on Avid
Pro Tools.
Most DAWs automatically scan for new plugins upon launch If you cannot find
the plugins in your DAW’s plugin manager, manually rescan the plugin folder to
locate the missing files.
Our plugins are compatible with a wide range of DAWs Below is a list of the
DAWs we have tested:
· Ableton Live 12 · Pro Tools 2024 · Logic Pro X · Cubase 13 · Reaper 7 ·
Presonus Studio One 6 · Reason 12 · FL Studio 21 · Cakewalk by Bandlab
Note that even if your DAW is not listed above, it might still work If you
encounter any compatibility issues, don’t hesitate to contact
support@neuraldsp.com for further assistance
Once your plugins are available in your DAW, create a new project, insert a
new audio track, arm it for recording, and load the plugin onto the track
4
You can also perform a custom installation where you can install only the
formats you need If you didn’t install the required plugin format for your DAW
during the setup, run the installer again and reinstall the missing format
Parallax X / Getting Started
File Locations
Neural DSP plugins will be installed in default locations for each plugin
format unless a different custom location is selected in the process
· macOS By default, the plugin files are installed in the following
directories:
· AU: Macintosh HD/Library/Audio/Plug-ins/Components · VST2: Macintosh
HD/Library/Audio/Plug-ins/VST · VST3: Macintosh HD/Library/Audio/Plug-ins/VST3
· AAX: Macintosh HD/Library/Application Support/Avid/Audio/Plug-ins ·
Standalone App: Macintosh HD/Applications/Neural DSP · Preset Files: Macintosh
HD/Library/Audio/Presets/Neural DSP · Settings Files: <User
Folder>/Library/Application Support/Neural DSP · Manual: Macintosh
HD/Library/Application Support/Neural DSP
· Windows By default, the plugin files are installed in the following
directories:
· VST2: C:Program FilesVSTPlugins · VST3: C:Program FilesCommon FilesVST3 ·
AAX: C:Program FilesCommon FilesAvidAudioPlug-Ins · Standalone App: C:Program
FilesNeural DSP · Preset Files: C:ProgramDataNeural DSP · Settings Files:
C:Users
5
There are two “Library” folders on macOS The main Library folder is located in
Macintosh HD/Library To access the User Library folder, open a Finder window,
click on the “Go” menu on top, hold down the Option key and click on “Library”
By default, the ProgramData and AppData folders are hidden on Windows While in
the File Explorer, click on the “View” tab and unchck the checkbox for “Hidden
Items” to make these folders visible
Uninstalling Neural DSP Software
To uninstall Neural DSP software on macOS, delete the files manually in their
respective folders
On Windows, Neural DSP software can be uninstalled either from the Control
Panel or by selecting the “Remove” option from the setup installer
Neural DSP Plugin files are available in 64-bit only
Parallax X / Getting Started
License Activation
In order to use Neural DSP plugins, you will need an iLok account and the iLok
license Manager application installed on your computer iLok is completely free
to use
· Creating an iLok account Follow these steps to create an iLok account:
· Registration form: Go to iLok’s account registration page and fill out the
required fields in the registration form. Click on “Create Account” to
finalize the registration.
· Email Verification: A confirmation email will be sent to the email address
provided during registration. Open the confirmation email in your inbox and
click on the verification link.
· iLok License Manager Download iLok License Manager and install it on your
computer After that, open the app and login using your iLok account email
address and password
· Neural DSP Plugin Installer Go to the Neural DSP Downloads page to get the
plugin installer Install the plugin by following the instructions on-screen
· 14-Day Trial After installing the plugin, open the standalone version or
load it on your DAW When the plugin interface opens, click on “Try”
6
Download iLok License Manager from here 400MB – 1GB of free storage space is
required per plugin installed
If you get the popup message “Attempted to start the trial too many times.
Please purchase a license to run the product”, open iLok License Manager, log
in with your iLok account, right-click on your trial license and select
“Activate”
You will be asked to login to your iLok account After logging in, the 14day
trial will be added to your iLok account automatically
Parallax X / Getting Started
· Perpetual License Before purchasing a license, make sure your iLok account
is created and linked to your Neural DSP account Additionally, make sure the
iLok License Manager app is up to date
Purchase a license by visiting the product page of the plugin you want to buy,
adding it to your cart, and completing the steps for purchasing
7
Link your iLok account to your Neural DSP account by entering your iLok
username in your account settings
You do not need an iLok USB dongle to use Neural DSP plugins as they can be
activated directly onto computers
The purchased license will be deposited to your iLok account after the
checkout automatically After installing the plugin, open the standalone
version or load it on your DAW When the plugin interface opens, click
“Activate”
A single license can be activated on 3 different computers at the same time as
long as the same iLok account is used on all of them
Licenses can be deactivated from computers that are not in use and transferred
to other devices This process can be repeated indefinitely.
Login to your iLok account when prompted and activate the license on your
machine Your Perpetual License then will be activated
Parallax X / Getting Started
Setting up your plugin
Once you have installed and activated your plugin, it’s time to set up and
start using it To get started, launch the standalone app of the plugin and
click on SETTINGS in the utility bar at the bottom of the plugin interface
Use the following settings to optimize your plugin’s performance and get the
best possible tone out of it
· Audio Device Type All the audio drivers installed on your computer will be
displayed here For most audio recording applications on Windows, ASIO is the
preferred driver format to use CoreAudio will be the best option on macOS
· Audio Device Choose the audio interface that your instrument is connected to
· Audio Input Channels Select the interface input(s) you have plugged your
instrument(s) into
· Audio Output Channels Select the interface output(s) that you use for
monitoring the audio
· Sample Rate Set it to 48000 Hz (unless you specifically require a different
sample rate)
· Audio Buffer Size Set it to 128 samples or lower. Increase the buffer size
to 256 samples or higher if you experience performance issues
What is latency?
When monitoring plugins in real time, you may experience a slight delay
between playing a note on your instrument and hearing the sound through your
headphones or studio monitors This delay is called latency. Decreasing the
buffer size reduces the latency, but demands more from your computer’s
processing power
How do I change these settings in a DAW audio session?
To set up audio settings for plugins within a DAW, open the audio settings
section of your DAW’s preference menu From there, you can select your audio
interface, set the I/O channels, adjust the sample rate and buffer size.
8
SETTINGS
Knobs and Sliders are controlled with the mouse Click-and-drag a Knob up to
turn it clockwise Moving the cursor down will turn the Knob counterclockwise
Double-click to recall default values To fine-tune values, hold down the
“Option” (macOS) or the “Control” key (Windows) while dragging the cursor
Click on switches to toggle their state Some switches include LED indicators
that light up when a parameter is engaged
Check our Knowledge base if you need more information about the process of
setting up and optimizing your plugin for the best possible performance and
sound quality
The SETTINGS tabs is available on the Standalone app only
Parallax X / Plugin Components
9
03
Plugin Components
Here is a rundown of the sections of Parallax X.
· Channel Strip Section
· Spectrum Analyzer · Low Compression Stage · Mid Distortion Stage · High
Distortion Stage · Equalizer
· Cab Section
· Multiple factory microphones · Dual Custom IR slots
· Global Features
· Input Gate · Transpose · Preset Manager · Tuner · Metronome · MIDI Support
Parallax X / Plugin Components
10
Channel Strip Section
Parallax is a multi-band distortion plugin for bass, based on a studio
technique where low, mid, and high frequencies are processed separately in
parallel and then mixed back together
· Spectrum Analyzer
Click-and-drag frequency bands to control their position on the grid
The spectrum analyzer measures and displays the magnitude of your signal in
terms of frequency
· L Band: Click-and-drag it horizontally to control the Low Pass Filter
position Drag it vertically to set the Low Compression Stage output level
· M Band: Click-and-drag it vertically to set the Mid Distortion Stage output
level
· H Band: Click-and-drag it horizontally to control the High Pass Filter
position Drag it vertically to set the High Distortion Stage output level
· SHOW SPECTRUM ANALYZER Switch: Click to toggle the live spectrum analyzer.
Parallax X / Plugin Components
11
· Low Compression Stage
The Low Compression Stage signal goes straight to the Equalizer, bypassing the
Cab Section Its signal remains mono when the INPUT MODE is set to STEREO
· COMPRESSION Knob: Sets the gain reduction and make up value. · LOW PASS
Knob: Low Pass Filter. Determines the frequency range
that will be affected by the compression · LOW LEVEL Knob: Determines the
output level of the Low Com-
pression Stage · BYPASS Switch: Click to activate/deactivate the Low
Compression
Stage
· Mid Distortion Stage
The Low Pass Filter ranges from 70 Hz to 400 Hz.
Gain Reduction Indicator A yellow LED next to the COMPRESSION knob will light
up whenever gain is reduced
Compressor Fixed Settings · ATTACK: 3 ms · RELEASE: 600 ms · RATIO: 4:1
· MID DRIVE Knob: Determines the amount of distortion applied to the signal
within the Mid frequency band range
· LOW LEVEL Knob: Determines the output level of the Mid Distortion Stage
· BYPASS Switch: Click to activate/deactivate the Mid Distortion Stage
The Mid Frequency Band is fixed at 400 Hz (Q value 0.7071).
· High Distortion Stage
· HIGH DRIVE Knob: Determines the amount of distortion applied to the signal
within the High frequency band range
· HIGH PASS Knob: High Pass Filter. Determines the frequency range that will
be affected by the distortion
· HIGH LEVEL Knob: Determines the output level of the High Distortion Stage
· BYPASS Switch: Click to activate/deactivate the High Distortion Stage
The High Pass Filter ranges from 100 Hz to 2.00 Hz.
Parallax X / Plugin Components
12
· Equalizer
6-Band Equalizer. Its place in the signal chain is after the Cab Section.
· FREQUENCY Sliders: Each slider adjusts the gain of a specific range of
frequencies (Bands) Click-and-drag the sliders up or down to increase or
decrease their volume +/- 12dB
· LOW SHELF Slider: Click-and-drag up or down to increase or decrease the low
end of the signal +/- 12dB
· HIGH SHELF Slider: Click-and-drag up or down to increase or decrease the
high end of the signal +/- 12dB
· BYPASS Switch: Click to activate/deactivate the Equalizer.
The Low Shelf Band is placed at 100 Hz.
The High Shelf Band is placed at 5.00 Hz.
Parallax X / Plugin Components
13
Cab Section
A comprehensive cabinet simulation module that features virtual mics which can
be positioned around the speakers Additionally, in this section, you can load
your own Impulse Response files.
Microphones’ postion can also be controlled by dragging the circles to the desired spot with the mouse The POSITION and DISTANCE knobs will reflect these changes accordingly
· IR Loader Controls
· BYPASS Buttons: Click to bypass/enable the selected microphone or User IR
file.
· LEFT & RIGHT Navigation Arrows: Click to cycle through factory microphones
and User IRs
· MIC/IR Combo Boxes: Dropdown menu for selecting factory microphones,
speakers, or loading your own IR files.
· PHASE Buttons: Inverts the phase of the selected IR. · LEVEL Knobs: Controls
the volume level of the selected IR. · PAN Knobs: Controls the output panning
of the selected IR. · POSITION & DISTANCE Knobs: Control the position and
distance
of the factory microphones respect to the speaker cone
What is an Impulse Response?
An Impulse Response is the measurement of a dynamic system reacting to an
input signal. This information can be stored in WAV files which can be used to
recreate the sound of spaces, reverberations, and instrument speakers
How can I load custom IR files on Neural DSP plugins?
Click on the IR Combo Box and select LOAD next to the “User IR” field. After
that, use the browser window to search and load your custom IR file. Once the
IR is loaded, you can adjust its LEVEL, PAN, and PHASE.
POSITION and DISTANCE knobs are disabled when loading User IR files.
The path location of the latest User IR used is remembered by the plugin User
presets that use custom IRs also save this path data, allowing you to easily
recall them later
Parallax X / Global Features
04
Global Features
Familiarize yourself with the user interface, which is broken down into
different sections accessible by icons at the top and bottom of the plugin
interface.
Section Modules
The plugin devices are organized in different sections at the top of the
plugin interface
14
Right-click or double-click sections to bypass them
Click sections to open them
Global Audio Controls
Set of parameters and features that allow you to customize your tone.
Red clipping indicators will inform you whenever the I/Os are fed beyond the maximum peak level The indicators last 10 seconds Click anywhere on the meters to clear the Red status
· INPUT Knob: Adjusts the level of the signal being fed into the plugin
· GATE Switch: Click to activate/deactivate. The noise gate helps to reduce
unwanted noise or hum in your signal
· THRESHOLD Knob: Dial up the Knob to increase the threshold. The noise gate
reduces the level of the audio signal when it drops below the set threshold
value
· TRANSPOSE Knob: Transposes the signal up or down in pitch by a constant
interval (+/-12 semitones) Use it to easily change the tuning of your
instrument The transpose module is bypassed at its default position (0 st)
· INPUT MODE Switch: Click to toggle between MONO and STEREO modes The plugin
is able to process a stereo input signal The plugin will require double the
resources while in STEREO mode
· OUTPUT Knob: Adjusts the level of the signal the plugin feeds out.
Increase the GATE threshold to tighten up your signal by creating a more defined and articulated tone, especially when playing high-gain tones Please note that if the threshold is set too high, sustained notes may be prematurely cut off, resulting in shorter sustain The threshold should be set to a level that cuts out the noise you want to eliminate, but doesn’t affect the tone or feel of your playing
Parallax X / Global Features
Preset Manager
A Preset is a saved configuration of settings and parameters that can be
recalled instantly Neural DSP Factory Presets are an excellent starting point
for your tones. After loading a Preset, you can fine-tune the parameters
across the different sections of the plugin to create a new tone that suit
your needs
Presets you make can be organized into folders and subfolders, making it
easier to find and manage them.
· PRESET Combo Box: Preset browser. Click to open a dropdown list of all the
Presets available
· LEFT & RIGHT Navigation Arrows: Click to cycle through the Presets
· DELETE Button: Click to delete the active Preset (Factory Presets cannot be
deleted)
· SAVE Button: Click to update a saved Preset with the latest changes
· SAVE AS… Button: Click to save your current configuration as a new User
Preset
· CONTEXTUAL Button: Click to access more features:
15
The INPUT MODE, TUNER, METRONOME, and MIDI Map settings are not part of the
Preset data, meaning that loading a Preset will recall all the parameters but
the ones mentioned above
An asterisk appears to the left of the Preset name whenever an active Preset
has unsaved changes
· IMPORT Button: Click to import a Preset file from custom locations. Use the
browser window to search and load the Preset file.
· RESET Button: Click to make all the parameters recall their default values
· LOCATE FILE Button: Click to access the Preset folder.
What is an XML file? XML, short for Extensible Markup Language, lets you
define and store data in a shareable manner Neural DSP presets are stored as
encrypted XML files in your computer.
You can choose to install presets when installing the plugin Click on the
magnifying icon at the upper-right corner of the USER tab to access the Neural
DSP Preset folder:
macOS Macintosh HD/Library/Audio/ Presets/Neural DSP
Windows C:ProgramDataNeural DSP
Subfolders created inside the main Preset folder will show up in the Preset
Manager the next time you open the plugin
Parallax X / Global Features
16
Utility Bar
Quick access to useful tools and global settings
· TUNER Tab: Click to open the Tuner interface. · MIDI Tab: Click to open the
MIDI Mappings window. · TAP Button: Controls the standalone global tempo by
clicking. The
tempo value is set as the interval between the last two clicks · TEMPO Button:
Displays the current standalone app’s global tem-
po value Click to enter a custom BPM value with the keyboard Click-and-drag
them up and down to increase or decrease the BPM value respectively ·
METRONOME Tab: Click to open the Metronome interface. · SETTINGS Tab: Click to
open the audio settings. MIDI devices can be assigned from this menu ·
DEVELOPED BY NEURAL DSP Tab: Click to access extra information about the
plugin (Version, Store shortcut, etc) · WINDOW SIZE Button: Click to resize
the plugin window to five fixed sizes. The latest window size used is recalled
upon opening new instances of the plugin
Tuner
Both standalone and plugin versions feature a built-in chromatic tuner It
works by detecting the pitch of the note that is being played and then
displaying it on the screen
The TAP TEMPO, METRONOME, and SETTINGS features are available on the
Standalone app only
Right-click anywhere on the plugin interface to access the WINDOW SIZE menu
Drag the edges and corners of the plugin window to continuously resize it.
The indicator light moves with the pitch of the note If the input is flat, it moves towards the left, and if it’s sharp, it moves towards the right When the pitch is in tune, the indicator will turn green
· TUNING Display: Displays the note that is being played and its current pitch
· MUTE Button: Click to mute the DI signal monitoring. This setting is
recalled upon opening new instances of the plugin
· MODE Switch: Toggles the pitch value between Cents and Hz. This setting is
recalled upon opening new instances of the plugin
· LIVE TUNER Switch: Click to enable/disable the Live Tuner in the Utility Bar
· FREQUENCY Selector: Adjusts the reference pitch (400-480Hz).
CMD/CTRL + Click on the TUNER tab in the Utility Bar to toggle the Live Tuner
Parallax X / Global Features
17
Metronome
The standalone app features a built-in Metronome It works by producing a
steady pulse to help you to practice and play in time
Click on the play/stop button in the utility bar to control the metronome’s playback without opening its interface
Closing the metronome interface will not stop its playback Chaging presets does not stop the metronome playback either
· VOLUME Knob: Adjusts the output level of the metronome’s playback
· TIME SIGNATURE Combo Box: Click to navigate through the different time
signatures, including compound and complex variations Selecting a time
signature will change the order and musical accent of the beats
· SOUND Combo Box: Click to navigate through the sound set. Selecting a sound
will change the sound of the beats
· PAN Knob: Adjust the output panning of the metronome’s beats. · UP & DOWN
Arrows: Click them to change the beat tempo (40 –
240 BPM) · BPM Value: Displays the current beat tempo. Click-and-drag it up
and down to increase or decrease the BPM value (40 – 240 BPM) · TAP Button:
Controls the metronome tempo by clicking. The BPM
value is set as the interval between the last two clicks · RHYTHM Combo Box:
Determines how many pulses can be heard
per beat · PLAY/STOP Button: Click to start/stop the metronome playback.
MIDI assignable · BEAT LEDs: Toggleable beats that can be customized by click-
ing They offer visual feedback according to the current tempo, subdivisions,
and accents selected
The TAP Button also affects the standalone app’s global tempo
Click on the beats to cycle through different accents Rightclick on the beats
to open their accent context menu
Parallax X / Global Features
MIDI Support
MIDI, short for Musical Instrument Digital Interface, is a protocol that
allows communication between computers, musical instruments, and MIDI-
compatible software
Neural DSP plugins can be controlled by external MIDI devices and DAW commands
This allows you to connect MIDI controllers such as footswitches and
expression pedals to control parameters and UI components within the plugin
· Connecting a MIDI controller to your computer There are many types of MIDI
devices in the market They can be connected via USB, MIDI Din or Bluetooth
USB MIDI devices
USB devices are very straightforward to use since they are plugged into a USB
port on your computer Follow these steps to connect a USB MIDI device to your
computer:
· Step 1: Connect the USB cable from the MIDI controller to an available USB
port on your computer
· Step 2: Although most MIDI controllers are plug-and-play devices, some
require driver software to be installed before they can be used. Double-check
the user manual for your specific controller to see if this is necessary
· Step 3: Once your MIDI controller is connected to your computer, check that
it is recognized by your plugin standalone app Click on SETTINGS in the
utility bar and check if the controller appears in the MIDI Input Devices menu
18
Any MIDI device capable of sending CC (Control Change), PC (Program Change) or
NOTE messages to your computer will be compatible with Neural DSP plugins
SETTINGS
Click on the checkboxes to enable or disable MIDI devices in the standalone
app’s Audio Settings menu
· Step 4 (Optional): To use MIDI controllers with a DAW, look for its MIDI
settings menu and enable your MIDI controller as a MIDI Input device
Parallax X / Global Features
Non-USB MIDI devices
To connect a non-USB MIDI device to your computer, you will need an audio
interface with a MIDI input or a separate MIDI interface Follow these steps to
connect a non-USB MIDI device to your computer:
· Step 1: Connect the MIDI Out port on your MIDI controller to a MIDI In port
on your audio or MIDI interface using a MIDI cable
· Step 2: Once your MIDI controller is connected to your computer, check that
it is recognized by your plugin standalone app. Click on SETTINGS in the
utility bar and check if the controller appears in the MIDI Input Devices menu
· Step 4 (Optional): To use MIDI controllers with a DAW, look for its MIDI
settings menu and enable your MIDI controller as a MIDI Input device
· “MIDI Learn” feature
Using the “MIDI Learn” function is the quickest and easiest way to map MIDI
messages on your plugin
To use the “MIDI Learn” function, right-click a parameter that you wish to
control and click Enable MIDI Learn Then, press the button or move the
pedal/slider on the MIDI controller that you want to use to control that
parameter The plugin will then automatically assign the button or pedal to the
chosen parameter This streamlined process eliminates the need for manually
mapping MIDI messages
Follow these steps to assign MIDI messages via the “MIDI Learn” feature:
· Step 1: Ensure that your MIDI controller is properly connected to your
computer and recognized by your plugin. On the plugin standalone app, click on
SETTINGS in the utility bar and check if the controller appears in the MIDI
Input Devices menu If you are using the plugin in a DAW, make sure that the
MIDI controller is set as the MIDI Input and Output device in your DAW
settings
· Step 2: Right-click on any parameter that you want to map to a MIDI message
and select “Enable MIDI Learn”
19
Non-USB MIDI devices usually have 5-Pin DIN or 3-Pin TRS connectors
Making your Mac a Bluetooth MIDI host
· Open the “Audio MIDI Setup” app
· Click on Window > Show MIDI Studio
· In the MIDI Studio window, click on “Open Bluetooth Configuration…”.
· Set your Bluetooth MIDI device peripheral in pairing mode
· Select the peripheral in the list of devices, then click “Connect”
Once your Bluetooth MIDI controller is connected to your computer, check that
it is recognized by your plugin standalone app Click on SETTINGS in the
utility bar and check if the controller appears in the MIDI Input Devices menu
When the “MIDI Learn” mode is enabled, the target parameter will be
highlighted in green
Click on other parameter to change the target Right-click a parameter and
select “Disable MIDI Learn” to deactivate the “MIDI Learn” mode
Parallax X / Global Features
· Step 3: With “MIDI Learn” mode enabled, send a MIDI message from your
controller by pressing the button or moving the pedal/ slider that you want to
control the parameter with
· Step 4: All the assigned MIDI messages will be registered in the “MIDI
Mappings” window in the utility bar
· “MIDI Mappings” window In the “MIDI Mappings” window, you can view and
modify all the MIDI messages you have assigned to your plugin
20
MIDI
Use the MIDI Mappings’ context menu to save, load, and set as default your current MIDI Mappings configuration.
To add a new MIDI message, click on “New MIDI Mapping” located on the left
side of the empty row This will allow you to manually map a MIDI message to a
parameter
You can also save and load MIDI Mapping Preset XML files
· BYPASS Switch: Click to bypass the MIDI mapping. · TYPE Combo Box: Click to
select the MIDI message type (CC, PC,
& NOTE) · PARAMETER/PRESET Combo Box: Click to select the plugin
parameter/preset to be controlled by the MIDI message · CHANNEL Combo Box:
Click to select the MIDI channel the
MIDI message will use (16 channels per MIDI device) · NOTE/CC/PC Combo Box:
Click to select which MIDI NOTE, CC#
or PC# is assigned to control the plugin paramater (Increase value when using
“Dec/Inc” message) · NOTE/CC/PC Combo Box: Click to select which MIDI NOTE,
CC# or PC# is assigned to control the plugin paramater (Increase value when
using “Dec/Inc” message) · VALUE Field: Determines which parameter value will
be recalled upon the MIDI message is sent · X Button: Click to delete the MIDI
mapping.
MIDI Mapping Preset files are stored in the following folders:
macOS
Windows C:Users
“Absolute” mappings send values 0-127 “Relative” mappings send values <64 for
decrement and >64 for increment
“Fixed-range” knobs are absolute “Endless” rotary knobs on your controller are
relative
Parallax X / Support & Contact
21
05
Support
Neural DSP Technologies is happy to provide professional technical support via
email to all registered users, absolutely free of charge Before contacting us,
we recommend searching our support and knowledge base sections below to see if
the answer to your question has already been published
If you cannot find a solution for your problem on the pages above, please
contact support@neuraldsp.com to help you further
Corporate Contact
Neural DSP Technologies OY Merimiehenkatu 36 D 00150, Helsinki, Finland
neuraldspcom
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>