Rolgno YH-7701 Hair Trimmer Men Bikini Trimmer Women User Manual

Rolgno YH-7701 Hair Trimmer Men Bikini Trimmer Women

Specifications

• Product Name: Electric Trimmer
• Input: DC 5V 1A
• Battery Type: Li-ion battery
• Model: YH-7701
• Charging Time: About 2 hours
• Using Time: About 90 minutes
• Size: 122x43x194mm
• Weight: About 145g

Accessories

• 2 IN 1 Electric Trimmer Kit
• User Manual
• Cleaning Brush
• Type-C Cable

Technical Highlights

• Replaceable Heads: Equipped with standard and narrow trimmer heads for convenient large area and precise detail grooming.
• Powerful Performance: High-quality motor provides 6000 RPM speed, effortlessly removing excess hair.

User Manual

ELECTRIC TRIMMER

Important Safety Instructions

For household use only. When using an electric product, always follow basic precautions, including the following. Read all instructions before using this electric trimmer. Save these instructions for future reference.

Product Introduction

Technical parameter (Subject to actual purchase)

Accessories (Subject to actual purchase)

Technical Highlights

Replaceable Heads
Equipped with standard and narrow trimmer heads for convenient large area and precise detail grooming.

Powerful Performance
High-quality motor provides 6000 RPM speed, effortlessly removing excess hair.

Introduction to Cutter Head

1. Cutter head classification (Subject to actual purchase)
   

2. Heads assembly and disassembly

Assembly of cutter head

Aim the cutter connector A to the machine slot B. Press the cutter back heavily until hearing a “click”.

Disassembly of cutter head

Pull the cutter head A away from the body B in the opposite direction.

3. Standard size trimmer assembly and disassembly 1
   Disassembly of standard size trimmer
   Turn off the clipper and press your thumb on cutter teeth, then push outward along the arrow direction as picture shows to take off the blade.
   When disassembling, please hold up the blade to avoid falling.

Assembly of standard size trimmer

1. Aim the cutter connector A to the machine slot B.
2. Press the cutter back heavily until hearing a click.

Kind Warning
White ceramic blade is easily broken, please handle with care in the process. The damaged ceramic blade may get the hair stuck and the blade won’t work. Sterilize the blade regularly to ensure the hygiene.

Guide Comb Application and Removal

Guide combs are used to cut hair at fixed lengths to avoid cutting too much hair by mistake, especially at the beginning.

1. Standard size trimmer: 3/6mm, 9/12mm guide comb Comb application: Slide comb over front of trimmer with comb notches sliding into the grooves on sides of trimmer head until you hear a “click”.
   • Comb application: aim the slot on one side first and then the other until you hear a “click”.
   • Comb removal: this is opposite to comb application by removing one side from the slot then the other side.
   • It’s advised to clean and blow dry pet hair before a trimming session.
   • Stain or other unusual object on hair will reduce blade sharpness and life.
   • Comb adjustment: Adjust comb length by moving notches up or down to desired length. （There are 3mm scale/6mm scale, 9mm scale/12mm scale on the guide combs）
   • Comb removal: Push up on bottom of comb and slide off trimmer head.
2. Narrow size trimmer: 2mm guide comb
   • Comb application: aim the slot on one side first and then the other until you hear a “click”.
   • Comb removal: this is opposite to comb application by removing one side from the slot then the other side.
   • It’s advised to clean and blow dry pet hair before a trimming session. Stain or other unusual object on hair will reduce blade sharpness and life.

Shaving and Trimming

1. Hold the shaver/trimmer so that the shaver/trimmer head is in full contact with your skin. Move the shaver slowly against the direction of hair growth.
2. When shaving/trimming sensitive areas, stretch the skin with your fee hand. For shaving/trimming underarms, put your hand on the back of your head to stretch the skin.

Cleaning and Maintenance of Trimmer Head

1. Standard size trimmer
2. Other trimmers 

• Applicable to all heads: Use the cleaning brush to brush off the hair which stick to the cutter head.
• Applicable to standard size trimmer: Press the back end of bottom blade as indicated in the picture, and clean the hair stuck between upper and lower blades.

Kind Warning

• Disassemble the trimmer regularly to clean any remaining hair inside.
• Never take off the springs of cutter head, otherwise the cutter head may not return to original state for normal operation.
• Each time after using, please do take off the cutter head and clean the surface, as well as the seam between upper and lower blades to avoid weakening the sharpness of blades.
• If you have lubricating oil at home, Please drip the blade oil into the cutter head for maintenance after each cleaning.

Cleaning and Maintenance of Trimmer Body

• Use a cleaning brush to wipe off the lint in the groove of the fuselage.
• This product is only can be cleaned in wet cloths, wipe the machine and make it dry, then equipped with the head.
• Don’t wipe clipper body with gasoline, alcohol, banana oil and other corrosive chemical agents.
• Don’t disassemble or repair it without authority, please contact dealar or manufacturers for repair service.
• Suitable for cleaning under an open tap
• Warning : The cutter head of the electric trimmer can be washed under the tap, but the body cannot, and the cutter head needs to be disassembled when flushing under the tap.

Charging

Connect the USB cable to trimmer
Warm Tip: After you bought this trimmer, please charge it before you put it into use.

Make sure it has been closed, the USB cable end is put into the USB socket and its indicator lamp is on.
(USB cable could be put it into sockets in cell phone adapter/desktop computer, laptop, portable power bank, etc)

Caution

• Regular cleaning and maintenance will ensure high performance and extend the life of the machine.
• If you do not use this product for a long time, please keep charging once a month to maintain battery activity.
• During use and charging, the clipper may become slightly warm, this is normal please feel free to use it.
• Do not leave the machine in hot environments or in direct sunlight.
• Do not mix with pets or humans.
• Do not modify, disassemble or repair the product yourself.
• Please check if the cutter head is damaged or deformed before use.
• Do not press the blade head hard against the skin.
• This product is not intended for use with persons with physical, sensory or intellectual disabilities and persons (including children) who lack experience and common sense.
• If you find any abnormalities or faults with this product, discontinue use immediately and treat the product according to the type of fault and refer it to our service department for repair if necessary.

Note : If you find that the battery has leaked, wipe the body with a cloth and put the leaking battery in a plastic bag and hand it over to an institution qualified to recycle and dispose of it. If the leaking battery comes into contact with the skin, please rinse with water and seek medical attention if you feel unwell.

Warning

1. It is forbidden to use non-rechargeable batteries in this product!
2. Batteries should be left in reserve before charging and only use adapters or USB sockets with an output of DC5V 1A in accordance with national standards!
3. Use this appliance only for the purpose described in the instructions.

Recycling
The batteries in electric clippers contain substances that may be harmful to the environment.

• the batteries must be removed from the push cutter before it is disposed of.
• the electric push shears must be disconnected from the electricity when the batteries are removed.
• Batteries should be disposed of safely.
• To remove the batteries: disconnect the power supply and let the push cutter work until the power is exhausted, then unscrew all the screws on the body, remove the housing and remove the rechargeable batteries.
• Warning: Do not short-circuit the batteries as this may cause them to burn and cause a fire.
• Do not throw the battery into a fire as this may cause an acoustic explosion or release toxic substances.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>