SCULPFUN TS1 Touch Screen for Laser Engraver Instructions
- July 31, 2024
- SCULPFUN
Table of Contents
TS1 Touch Screen for Laser Engraver
“`html
Product Specifications:
- Manufacturer: [Manufacturer Name]
- Model: [Model Number]
- Compliance: FCC Part 15
- Radiation Exposure Limits: FCC Compliant
- Minimum Distance: 0cm between radiator and
body
Product Usage Instructions:
Safety Precautions:
1. Do not make any changes or modifications to the device that
are not explicitly approved by the manufacturer.
2. Ensure the device is operated within the specified minimum
distance of 0cm between the radiator and the body.
Installation:
1. Place the device on a stable surface.
2. Connect the necessary cables according to the provided
manual.
Operation:
1. Power on the device using the designated button.
2. Follow the on-screen instructions for setup and
configuration.
Maintenance:
1. Keep the device clean and free from dust.
2. Regularly check for any signs of wear or damage and contact
the manufacturer for assistance if needed.
Frequently Asked Questions (FAQ):
Q: Can I modify the device without voiding its warranty?
A: No, any changes or modifications not approved by the
manufacturer could void the warranty.
Q: What should I do if I experience interference with the
device?
A: Ensure that the device is not causing harmful interference to
other equipment and try adjusting its placement to minimize
interference received.
“`
FCC Warnning: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection againstharmful
interference in a residential installation. This equipment generates, uses and
can radiateradio frequency energy and, if not installed and used in accordance
with the instructions, maycause harmful interference to radio communications.
However, there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures: · Reorient or relocate the receiving antenna. ·
Increase the separation between the equipment and receiver. · Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. · Consult the dealer or an experienced radio/TV
technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 0cm between the radiator and your body.