SCULPFUN iCube-3W 10W Laser Engraver User Manual

June 1, 2024
SCULPFUN

SCULPFUN iCube-3W 10W Laser Engraver

SCULPFUN iCube-3W 10W Laser Engraver

Product structure chart

  1. Front view
    Product structure chart

  2. Right view
    Product structure chart

  3. Back view
    Product structure chart

  4. Bottom view
    Product structure chart

Focus

  1. Put down the focusing column on the left side of the laser head, turntheright
    hand screw, place the laser head at a suitable height, tighten the screw, and retract the focusing column.

  2. When carving objects of different heights, you need to refocus to ensure the working effect.
    Focus

APP software download and installation

  1. Scan the code to enter the official website to download Sculp fun Laser Tool (MAC & WIN) WiFi configuration software
  2. Download Android mobile APP OR search sculp fun in Apple store
    QR Code

Note:

  1. Android needs to use a browser to scan the QR code to download.
  2. After successful installation, you need to give corresponding permissions

Connect the machine to WiFi

  1. Connect device to power
  2. For the first configuration, you need to connect the data cable to the computer.
  3. Pass Sculp fun Laser Tool Software settings
  4. Choose WiFi Configuration Tool
    Connect the machine to WiFi

Note: The software upgrade interface may change. Scan the QR code or follow the official YOUTUBE channel to get the latest detailed usage video tutorials. https://www.youtube.com/@SCULPFUNReal

  1. Select the COM corresponding to the machine

  2. Click Connect to connect the machine
    Connect the machine to WiFi

  3. Enter the WIFI name and password at home

  4. Click Connect WiFi

  5. Click Get IP to obtain the IP address of the current machine. At this time, you can unplug the data cable and transfer it to the mobile APP for operation.
    Connect the machine to WiFi

Introduction to mobile APP interface

  1. Fill in the machine WiFi address

  2. Click Connect to connect the machine
    Introduction to mobile APP interface

  3. Set up
    User Agreement/Privacy Terms/Version Information/Language Settings

  4. Machine information
    Machine name/IP address

  5. Creation
    Camera/Built-in material library/Picture library/Brush/QR code/Edit text

  6. Control
    Control engraving machine movement

  7. Graving
    View files uploaded on the machine

  8. Visit official website
    Introduction to mobile APP interface

Control interface

  1. Set the laser moving speed

  2. Set the distance the laser moves in a single click

  3. Control Panel
    The middle is reset

  4. laser preview

  5. Air assist (stay tuned)
    Control interface

Introduction to APP creation interface

  1. Eraser
  2. Brush
  3. Drawing area
  4. Insert shape/QR code
  5. Operating area/text input
  6. Material import
    Introduction to APP creation interface

Engraving mode selection

  1. Mode selection
  2. Corresponding mode parameter settings
  3. Reset parameters
  4. After selecting the mode and parameters, select Next to prepare for engraving.
    Engraving mode selection

Engraving parameter settings

  1. Name the file name
  2. Adjust engraving size
  3. Set engraving speed
  4. Set engraving power
  5. Move laser position
  6. Engraving preview
  7. Upload engraving file
  8. Air assist switch (stay tuned)
    Engraving parameter settings

Engraving interface

  1. After the upload is completed, the machine will start the engraving task
  2. Displays the engraving progress bar, and the bottom can control the machine to pause and start
  3. Just wait for the engraving to be completed
    Engraving interface

PC software introduction

Mac OS : Light Burn
Windows : Light Burn & Laser GRBL

Download from the following website Light Burn
https://lightburnsoftware.com/pages/download-trial

Download from the following website Laser GRBL
https://lasergrbl.com/download/

Filter cotton replacement

  1. Unscrew the four screws on the left and right sides as shown in the picture
  2. Please carefully disassemble the baffle. There is a buzzer wire behind the baffle. Be careful not to tear it.
  3. Put in activated carbon and filter cotton in sequence
  4. Align the baffle with the hole and tighten the screws
    Filter cotton replacement

Tips: Please watch our YOUTUBE channel for detailed replacement video tutorials

FAQ

Machine mode selection

  1. Factory default WiFi mode, if you need to use Bluetooth, please check the official you tube video tutorial.

Can’t connect to computer

  1. The USB cable is not connected: Check the computer end of the USB data cable and the machine interface to make sure it is plugged in place. The USB interface on the front panel of some desktop computers is invalid and needs to be connected to the socket on the rear of the fuselage.
  2. Unable to connect via Bluetooth: Unplug the power supply, completely power off the device for 5 seconds, and then reconnect. Note: There may be Bluetooth compatibility issues, it is recommended to change the computer or wired connection.

No response when connecting to mobile APP

  1. Please follow the instructions first, connect the machine to the computer with a data cable, configure the WIFI, and then connect to the APP.
  2. Compatibility glitches: If a newly launched mobile phone or after upgrading the system has connection abnormalities due to compatibility issues, you can contact our customer service and send back a screenshot of the mobile phone configuration to receive quick technical support.

Abnormal stop during offline engraving process

  1. The engraving image uploaded when the APP is connected to the mobile phone is incomplete. Just upload it again.
  2. Computer Bluetooth compatibility issues may cause intermittent engraving. It often occurs and it is recommended to use a wired connection.

The engraving effect is very light or no trace

  1. Inaccurate focus : The height of the engraving object is different and the focus needs to be refocused.
  2. Engraving speed : The speed is too fast and the burning time is too short. The engraving speed can be lowered.
  3. The picture is too light : The lines of the imported picture are too thin and the color is too light, which will affect the engraving effect.
  4. Placement of engraving objects : If the object to be engraved is placed at an angle, the focal length of the laser is fixed, so the object to be engraved must be placed flat and parallel to the fuselage. Otherwise, the focus will be inaccurate, resulting in abnormal engraving effects.

Sculp your fun !

Customer Service:

For detailed warranty policy, please visit our official website at: sculpfun.com
For Laser Engraver technical support and
service, please email: support@sculpfun3d.com
Official Group for Sculp fun Users:
https://www.facebook.com/groups/538557960530958
Manufacturer: Shenzhen Sculp fun Technology Co., Ltd.
Address: 1411, Building D, Longkang Jiuzuan Business
Center South, Doling Community, Munshi Street, Long-haul
District, Shenzhen, Guangdong, China 518131
Note: This Manual is just for installation, For how to use
laser GRBL software, how to show the position of the
engraving pattern, and how to set the engraving parameters
of different materials, please scan the QR code or visit the
website sculpfun.com to download the User Manual.
Scanner APP:
QR Code Reader
/Barcode Scanner
or any APP with scanner
Symbol
Media IconLogo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals