niceboy HIVE DROPS Bluetooth Earphones User Manual

: June 6, 2024
: niceboy

Table of Contents

Niceboy HIVE DROPS Bluetooth Earphones User Manual
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Niceboy HIVE DROPS Bluetooth Earphones User Manual

PRODUCT DESCRIPTION

LED diode
Multifunctional button
Input for charging
LED charging indicator
Charging USB-C port

PRODUCT DESCRIPTION

FIRST LAUNCH AND PAIRING

Take both earphones out of their charging box and remove the stickers protecting the charging pins (3) on the earphones.
Power on the earphones by pressing and holding the multifunctional buttons (2) on both earphones.
The earphones will power on and pair together. The earphones are prepared for connecting to Bluetooth after the LED diode (1) begins to flash both blue and red.
Open the Bluetooth settings on your device and find the “Niceboy HIVE drops” option from the list of available devices.
Successful pairing is announced by an acoustic signal and the LED diode (1) will flash blue at longer intervals.

Removing the earphones from their charging box is all it takes to connect the earphones again at a later time. The earphones will automatically power on and connect to your device.

POWERING ON AND OFF

Just take the earphones out of their charging box to power them on, or manually power on the earphones by pressing and holding both multifunctional buttons. Then, place the earphones back in their charging box to power them off. They will power off and disconnect from your device on their own. You will know the earphones have been placed back in their box correctly when the LED diode (1) shines red. The diode will stop shining once the earphones have reached a 100% charge. You may also power off the earphones by pressing and holding both multifunctional buttons (2) for about 5 seconds.

MULTIFUNCTIONAL BUTTON – BASIC CONTROLS

Pressing any button twice – play/pause
Pressing the right button once – increase volume by one, accept an incoming call/hang up a call
Pressing the left button once – decrease volume by one, accept an incoming call/hang up a call
Pressing and holding the right button – next track, decline an incoming call
Pressing and holding the left button – previous track, decline an incoming call
Pressing the left button three times – activate voice assistant Siri / Google Now

CHARGING

Connect the charging cable into a USB port (5) to charge the actual charging box. When charging, the LED diode (4) will flash. After the box is fully charged the diode will shine red.

FACTORY SETTINGS

After having placed both earphones into their charging box, press and hold both multifunctional buttons (2) at once until both diodes (1) flash, taking about 9 seconds. The earphones have now been returned to their factory settings.

SPECIFICATIONS

Bluetooth: 5.0
Supported Bluetooth profiles: HFP, HSP, A2DP, AVRCP
Degree of coverage: IPX4
Transmission distance: 10m
Frequency: 20Hz – -15kHz
Sensitivity: 94db ± 3dB
Speaker: 6mm
Playback time off one charge: up to 3 hours
Earphones battery capacity: 40mAh
Charging box battery capacity: 300mAh