IKEA DIRIGERA Smart Home Hub User Manual
- July 31, 2024
- Ikea
Table of Contents
IKEA DIRIGERA Smart Home Hub
Specifications:
- Ethernet Port : 10/100MBps
- DC IN: 5.0V DC, 1.0 A, USB-C
FEATURES
Product Usage Instructions
Getting Started:
- Connect the USB cable to the power supply unit and your hub.
- Plug the power supply unit into the wall socket.
- If you have an Apple device, go to the App Store and download the IKEA Home smart app.
- Follow the app instructions to install your hub and other devices.
Your Hub’s Status Lights:
- Ring light softly pulsing white: Hub has finished starting up.
- Centre light constant white: Hub is connected to the internet and operational.
- Center light double-blinking white : Hub is disconnected from the internet; still controllable via the app and home WiFi network.
Rebooting Your Hub:
To reboot your hub, disconnect and reconnect the power. The ring light will
fill to symbolize loading while starting up. Rebooting does not delete hub
information.
Adding IKEA Home Smart Products:
Follow the app instructions to add Works with IKEA Home smart devices to your
hub.
Care Instructions:
- Unplug the power supply unit before cleaning or when not in use.
- Wipe the hub and power supply unit with a damp cloth using a mild cleaning agent.
- Dry with a soft, dry cloth.
- Never submerge in water or use abrasive cleaners/chemical solvents.
Product Servicing:
Do not attempt to repair the product yourself to avoid risks. Save
instructions for future reference.
Technical Data:
- Model: DIRIGERA hub for smart products
- Type: E2315
- Input: 5.0V DC
- Range: 10m in open air
- Operating frequency : 2400 – 2483.5 MHz
- Output power: 11.8 dBm
Getting started
Connect the USB cable to the power supply unit and your hub. Then plug the power supply unit into the wall socket.
-
If you have an Apple device
Go to the App Store and download the IKEA Home smart app. The app will take you through the process of installing your hub and other devices. -
If you have an Android device
Go to the Google Play store and download the IKEA Home smart app. The app will take you through the process of installing your hub and other devices.
Your hub’s status lights
Understanding your hub’s status lights
-
Ring light – loading
Shown when the hub is connected to power and is starting up. Wait for the light to fill the ring before proceeding with connecting the hub to the app. -
Ring light softly pulsing white
This is shown once your hub has finished starting up. You can now follow the instructions in the app to connect your hub. -
Center light constant white
Shown when the hub is connected to the internet and everything is OK. -
Centre light double-blinking white
Shown when the hub is disconnected from the internet. You can continue to control your devices through the app and your home WiFi network. -
Ring light – spinning white
When your hub is updating or busy processing a large amount of information. -
Rebooting your hub
Disconnect and reconnect the power to your hub to reboot it. The ring light fills to symbolise loading while starting up. This will not delete information on your hub. -
Factory resetting
Push a pin into the pinhole on the underside of the hub until the status lights turn off. The centre light will then blink red 4 times when the hub is ready. Note – this deletes all previous hub information.
Adding IKEA Home smart products to your hub
Follow the instructions in the app to add “Works with IKEA Home smart” devices
to the hub.
Care instructions
- Unplug the power supply unit from the power source before cleaning and when the hub is not in use.
- To clean the hub and the power supply unit, wipe with a soft cloth moistened with a small amount of mild cleaning agent. Use another soft, dry cloth to wipe dry.
- Never submerge the power supply unit or hub in water.
- Never use abrasive cleaners or chemical solvents as this can damage the products.
IMPORTANT!
- The wall socket must be located near the equipment and must be easily accessible.
- Storage temperature: -20 °C to 25 °C.
- Operating temperature: 0 °C to 40 °C.
- Do not leave the hub in direct sunlight or near any heat source, as it may overheat.
- Do not subject the hub or power supply unit to wet, damp or excessively dusty environments, as this may cause damage.
- The range between the hub and the receiver is measured in open air.
- Different building materials and placement of the units can affect the wireless connectivity range.
- Children should be supervised to ensure that they do not play with the product.
- This equipment is only suitable for mounting at heights up to 2 m.
- For recommended precautionary measures and technical data, see the back of the power supply unit.
Product Servicing
Do not attempt to repair this product yourself. If you open or remove parts,
you may expose yourself to dangerous voltage points or other risks.
Save these instructions for future use.
Technical data
-
Model : DIRIGERA hub for smart products
-
Type : E2315
-
Input : 5.0V DC
-
Range : 10 m in open air
-
Power supply unit:
- Type :
- ICPSW5-5NA-1
- ICPSW5-5EU-1
- Input : 100-240 VAC, 50/60 Hz, 0.3A
- Output : 5.0 V DC
- Max total load: 1.0 A, 5.0W
-
Power supply unit:
- Type :
- ICPSW5-10NA-1
- ICPSW5-10EU-1
- Input : 100-240 VAC, 50/60 Hz, 0.3A
- Output : 5.0 V DC
- Max total load: 2.0 A, 10.0W
-
Average active efficiency: 76.8%
-
No load power consumption: 0.03 W
Indoor use only
-
Manufacturer : IKEA of Sweden AB
(commercial registration number: 556074-7551) -
Address:
Box 702, SE-343 81 Älmhult, SWEDEN
RF EXPOSURE INFORMATION
According to RF exposure regulations, under normal operations the end user
shall refrain from being closer than 20 cm from the device. The crossed-out
wheeled bin symbol indicates that the item should be disposed of separately
from household waste. The item should be handed in for recycling in accordance
with local environmental regulations for waste disposal. By separating a
marked item from household waste, you will help reduce the volume of waste
sent to incinerators or landfills and minimize any potential negative impact
on human health and the environment. For more information, please contact your
IKEA store.
FAQ
Q: Can I submerge the hub or power supply unit in water for cleaning?
A: No, never submerge them in water as it can damage the products.
Q: How do I know if my hub is connected to the internet?
A: The center light will be constantly white when the hub is connected to the
internet and operational.
Q: What should I do if my hub is disconnected from the internet?
A: You can still control your devices through the app and your home WiFi
network even if the center light is double-blinking white.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>