Montpellier MBUL134E Built Under Larder Fridge Instruction Manual

: July 30, 2024
: Montpellier

Table of Contents

Montpellier MBUL134E Built Under Larder Fridge
Product Usage Instructions
SAFETY INSTRUCTIONS
DESCRIPTION OF THE APPLIANCE
Dimensions
USING THE APPLIANCE
FOOD STORAGE
CLEANING AND MAINTENANCE
TECHNICAL DATA
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Montpellier MBUL134E Built Under Larder Fridge

Specifications:

Product Name: Built-Under Larder Fridge MBUL134E
Functions : Laundry, Dishwashing, Cooking, Cooling
Warranty : 2-year Parts & Labour Guarantee
Manufacturer : Montpellier
Website : www.montpellier-appliances.com

Product Usage Instructions

Welcome:
Thank you for choosing this Montpellier appliance designed to offer style, reliability, and performance for trouble-free use. Please read the manual carefully before installation and usage.

Guarantee Activation:
To activate the guarantee, keep your product serial number handy. It can be found inside the appliance. Retain your original sales invoice for service calls.

Registering Guarantee:
You can register your guarantee using one of the following methods:

Online registration on the manufacturer’s website.
By phone using the provided contact details.
By mailing the registration form to the address provided.

Please read these instructions carefully before attempting to install or use this appliance. We recommend that you keep these instructions in a safe place for future reference.

Welcome
Thank you for choosing this Montpellier appliance. Our appliances have been designed to provide you with the best combination of style, reliability and performance to give you years of trouble-free use. You may be familiar with a similar product, but please take time to read these instructions carefully before installing or using your appliance to ensure you get the most from your purchase.

We recommend that you keep this manual in a safe place for future reference. Your appliance is covered by a comprehensive two year Parts & Labour Guarantee. In the unlikely event that you experience a problem with your appliance, you can rest assured that you are fully protected against the cost of repairs for the first 24 months . Please note that any claim must be accompanied by the model reference number, serial number and proof of purchase. To activate your guarantee, you will need your product serial number. This can be found inside your appliance.

NB: Please make sure that you keep a copy of your original sales invoice as this will be needed if any service call is required.

There are three ways to register your Guarantee:

Online: Visit the Support page on our website and complete the online Product Registration form. www.montpellier-appliances.com
By Post: Simply detach and fill in the form provided, attach a stamp and send it in the post. Don’t forget to include your e-mail address so that we can send confirmation to you.
By Phone: Contact our warranty registration department on 0808 1961388

2-YEAR GUARANTEE — PARTS & LABOUR — ACROSS ALL OUR MODELS Montpellier www .montpellier-appliances.com

Thank you for choosing this product.

This User Manual contains important safety information and instructions on the operation and maintenance of your appliance.
Please take the time to read this User Manual before using your appliance and keep this book for future reference.
The design and specifications are subject to change without prior notice for product improvement.

SAFETY INSTRUCTIONS

General Safety Warnings
Read this user manual carefully.

WARNING :

Make sure that the appliance is left to stand for a minimum of 4 hours before being turned on for the first time.
Keep ventilation openings in the appliance enclosure or in the built-in structure clear of obstruction.
Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
Do not damage the refrigerant circuit.
When positioning the appliance, ensure the supply cord is not trapped or damaged.
Do not locate multiple portable socket outlets or portable power supplies at the rear of the appliance.
In order to avoid any hazards resulting from the instability of the appliance, it must be fixed in accordance with the instructions.

If your appliance uses R600a as a refrigerant (this information will be provided on the label of the cooler) you should take care during transportation and installation to prevent the cooler elements from being damaged. R600a is an environmentally friendly and natural gas, but it is explosive. In the event of a leak due to damage of the cooler elements, move your fridge away from open flames or heat sources and ventilate the room where the appliance is located for a few minutes.

While carrying and positioning the fridge, do not damage the cooler gas circuit.
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
This appliance is intended to be used in household and domestic applications only.
If the socket does not match the refrigerator plug, it must be replaced by a service agent or similarly qualified persons in order to avoid a hazard.
A specially grounded plug has been connected to the power cable of your refrigerator. This plug should be used with a specially grounded socket of 13 amperes. If there is no such socket in your house, please have one installed by an authorized electrician.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances. Children are not expected to perform cleaning or user maintenance of the appliance, very young children (0-3 years old) are not expected to use appliances, young children (3-8 years old) are not expected to use appliances safely unless continuous supervision is given, older children (8-14 years old) and vulnerable people can use appliances safely after they have been given appropriate supervision or instruction concerning use of the appliance. Very vulnerable people are not expected to use appliances safely unless continuous supervision is given.
If the supply cord is damaged, it must be replaced by the manufacturer, an authorized service agent or similar qualified persons, in order to avoid a hazard.

To avoid contamination of food, please respect the following instructions:

Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
Clean regularly surfaces that can come in contact with food and accessible drainage systems
Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mould from developing within the appliance.

Installation warnings
Before using your fridge for the first time, please pay attention to the following points:

The operating voltage for your fridge is 220-240 V at 50Hz.
The plug must be accessible after installation.
Your fridge may have an odour when it is operated for the first time. This is normal and the odour will fade when your fridge starts to cool.
Before connecting your fridge, ensure that the information on the data plate (voltage and connected load) matches that of the mains electricity supply. If in doubt, consult a qualified electrician.
Insert the plug into a socket with an efficient ground connection. If the socket has no ground contact or the plug does not match, we recommend you consult a qualified electrician for assistance.
The appliance must be connected with a properly installed fused socket. The power supply (AC) and voltage at the operating point must match with the details on the name plate of the appliance (the name plate is located on the inside left of the appliance).
We do not accept responsibility for any damages that occur due to ungrounded usage.
Place your fridge where it will not be exposed to direct sunlight.
Your fridge must never be used outdoors or exposed to rain.
Your appliance must be at least 50 cm away from stoves, gas ovens and heater cores, and at least 5 cm away from electrical ovens.
If your fridge is placed next to a deep freezer, there must be at least 2 cm between them to prevent humidity forming on the outer surface.
Do not cover the body or top of fridge with lace. This will affect the performance of your fridge.
Clearance of at least 150 mm is required at the top of your appliance. Do not place anything on top of your appliance.
Do not place heavy items on the appliance.
Clean the appliance thoroughly before use (see Cleaning and Maintenance).
Before using your fridge, wipe all parts with a solution of warm water and a teaspoon of sodium bicarbonate. Then, rinse with clean water and dry. Return all parts to the fridge after cleaning.
The installation procedure into a kitchen unit is given in the installation manual. This product is intended to be used in proper kitchen units only.
Use the adjustable front legs to make sure your appliance is level and stable. You can adjust the legs by turning them in either direction. This must be done before placing food in the appliance.

Electrical information (For UK type plug)
Warning! This appliance must be earthed.

The mains lead of this appliance has been fitted with a specially earthed plug.
Important : Do not use the appliance without the fuse cover in position. Should the fuse need to be replaced, it must be replaced with a 13A fuse, ASTA approved to BS1362.
The plug must be used with a specially earthed socket of 13 amperes. If there is no such socket in your house, please have one installed by an authorised electrician.

The mains lead of this appliance has been fitted with a BS 1363A 13A fused plug. To change a fuse in this type of plug, follow the steps below:

Remove the fuse cover and fuse.
Fit replacement 13A fuse, ASTA approved to BS 1362 type, into the fuse cover.
Replace fuse cover.

During Usage

Do not connect your fridge to the mains electricity supply using an extension lead.
Do not use damaged, torn or old plugs.
Do not pull, bend or damage the cord.
Do not use plug adapter.
This appliance is designed for use by adults. Do not allow children to play with the appliance or hang off the door.
Never touch the power cord/plug with wet hands. This may cause a short circuit or electric shock.
Do not place explosive or flammable material in your fridge. Place drinks with high alcohol content vertically in the fridge compartment and make sure their tops are tightly closed.

Old and Out-of-order Fridges

If your old fridge or freezer has a lock, break or remove the lock before discarding it, because children may get trapped inside it and may cause an accident.
Old fridges and freezers contain isolation material and refrigerant with CFC. Therefore, take care not to harm the environment when you are discarding your old fridges.

CE Declaration of Conformity
We declare that our products meet the applicable European Directives, Decisions and Regulations and the requirements listed in the standards referenced. Disposal of your old appliance The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of the product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Packaging and the Environment
Packaging materials protect your machine from damage that may occur during transportation. The packaging materials are environmentally friendly as they are recyclable. The use of recycled material reduces raw material consumption and therefore decreases waste production.

Notes:

Please read the instruction manual carefully before installing and using your appliance. We are not responsible for the damage that occurred due to misuse.
Follow all instructions on your appliance and instruction manual, and keep this manual in a safe place to resolve the problems that may occur in the future.
This appliance is produced to be used in homes and it can only be used in domestic environments and for specified purposes. It is not suitable for commercial or common use. Such use will cause the guarantee of the appliance to be canceled and our company will not be responsible for any losses incurred.

Recommendations

If the appliance is switched off or unplugged, wait at least 5 minutes before plugging the appliance in or restarting it in order to prevent damage to the compressor.
If you will not use your appliance for a long time (e.g. in summer holidays) unplug it. Clean your appliance according to chapter cleaning and leave the door open to prevent humidity and smell.
If a problem persists after you have followed all the above instructions, please consult the nearest authorised service centre.
The appliance you have purchased is designed for domestic use only. It is not suitable for commercial or common use. If the consumer uses the appliance in a way that does not comply with this, we emphasise that the manufacturer and the dealer will not be responsible for any repair and failure within the guarantee period.

DESCRIPTION OF THE APPLIANCE

This presentation is only for information about the parts of the appliance. Parts may vary according to the appliance model.

Refrigerator shelves
Crisper cover
Crisper
Bottle shelf
Door upper shelf
Egg holder
Thermostat knob

General notes:
Fresh Food Compartment (Fridge): The most efficient use of energy is ensured in the configuration with the drawers in the bottom part of the appliance, and shelves evenly distributed, position of door bins does not affect energy consumption.

Dimensions

USING THE APPLIANCE

Thermostat Setting
The thermostat automatically regulates the temperature inside the cooler and freezer compartments. Refrigerator temperatures can be obtained by rotating the knob to higher numbers; 1 to 3, 1 to 5 or SF (Maximum numbers on the thermostat depends on your product.)

Thermostat settings:

1 – 2: For short-term storage of food
3 – 4: For long-term storage of food
5: Maximum cooling position. The appliance will work longer.If required, change the temperature setting.

If the device has SF position:
Turn the knob to SF to freeze fresh food quickly. In this position, the freezer compartment will operate at lower temperatures. After your food freezes, turn the thermostat knob to its normal use position. If you do not change the SF position, your appliance work will automatically return to its last used thermostat position according to the time indicated in the note. Return the thermostat switch to the SF position and return it to normal use according to the time indicated in the note.If the thermostat switch is in the SF position when your appliance is first started, your appliance work will automatically return to the operation in the thermostat-3 position according to the time indicated in the note.

The super mode will be cancel automatically after max 48 hours.

Temperature Settings Warnings

Your appliance is designed to operate in the ambient temperature ranges stated in the standards, according to the climate class stated in the information label. It is not recommended that your fridge is operated in the environments which are outside of the stated temperature ranges.
This will reduce the cooling efficiency of the appliance.
Temperature adjustments should be made according to the frequency of door openings, the quantity of food kept inside the appliance and the ambient temperature in the location of your appliance.
When the appliance is first switched on, allow it to run for 24 hours in order to reach operating temperature. During this time, do not open the door and do not keep a large quantity of food inside.
A 5 minute delay function is applied to prevent damage to the compressor of your appliance when connecting or disconnecting to mains, or when an energy breakdown occurs. Your appliance will begin to operate normally after 5 minutes. Larders (coolers) have not any freezer compartments but can cool up to 4 – 6 °C.

Climate class and meaning:

T (tropical): This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 43 °C.
ST (subtropical): This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 38 °C.
N (temperate) : This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 32 °C.
SN (extended temperate): This refrigerating appliance is intended to be used at ambient temperatures ranging from 10 °C to 32 °C.

FOOD STORAGE

Refrigerator Compartment

To reduce humidity and avoid the consequent formation of frost, always store liquids in sealed containers in the refrigerator. Frost tends to concentrate in the coldest parts of the evaporating liquid and, in time, your appliance will require more frequent defrosting.
Cooked dishes must remain covered when they are kept in the fridge. Do not place warm foods in the fridge. Place them when they are cool, otherwise the temperature/humidity inside the fridge will increases, reducing the fridge’s efficiency.
Make sure no items are in direct contact with the rear wall of the appliance as frost will develop and packaging will stick to it. Do not open the refrigerator door frequently.
We recommend that meat and clean fish are loosely wrapped and stored on the shelf just above the vegetable bin where the air is cooler, as this provides the best storage conditions.
Store loose fruit and vegetable items in the crisper containers.
Storing fruit and vegetables separately helps prevent ethylene-sensitive vegetables (green leaves, broccoli, carrot, etc.) being affected by ethylene-releaser fruits (banana, peach, apricot, fig etc.).
Do not put wet vegetables into the refrigerator.
Storage time for all food products depends on the initial quality of the food and an uninterrupted refrigeration cycle before refrigerator storage.
Water leaking from meat may contaminate other products in the refrigerator. You should package meat products and clean any leakages on the shelves.
Do not allow food to come into contact with the temperature sensor, which is located in the refrigerator compartment, in order to keep the refrigerator compartment at optimum temperature.
Consume packaged foods before the recommended expiry date.
For normal working conditions, it will be sufficient to adjust the temperature setting of your refrigerator to run at +4 °C.
The temperature of the fridge compartment should be in the range of 0-8 °C, fresh foods below 0 °C may become iced and rotted, bacterial load increases above 8 °C, and spoils.
Do not put hot food in the refrigerator immediately, wait for the temperature to pass outside. Hot foods increase the degree of your refrigerator and cause food poisoning and unnecessary spoiling of the food.
To prevent cross contamination, meat products and fruit/vegetables should not be stored together.
Foods should be placed in the refrigerator in closed containers or covered to prevent the spread of moisture and odors.

The table below is a quick guide to show you the most efficient way to store the major food groups in your refrigerator compartment.

NOTE : Potatoes, onions and garlic should not be stored in the refrigerator.

CLEANING AND MAINTENANCE

Disconnect the unit from the power supply before cleaning.
Do not wash your appliance by pouring water on it.
Do not use abrasive products, detergents or soaps for cleaning the appliance. After washing, rinse with clean water and dry carefully. When you have finished cleaning, reconnect the plug to the mains supply with dry hands.
Make sure that no water enters the lamp housing and other electrical components.
The appliance should be cleaned regularly using a solution of bicarbonate of soda and lukewarm water.
Clean the accessories separately by hand with soap and water. Do not wash accessories in a dish washer.
Clean the condenser with a brush at least twice a year. This will help you to save on energy costs and increase productivity.

The power supply must be disconnected during cleaning.

Defrosting
Defrosting the Refrigerator Compartment

Defrosting occurs automatically in the refrigerator compartment during operation. The water is collected by the evaporation tray and evaporates automatically.
The evaporation tray and the water drain hole should be cleaned periodically with the defrost drain plug to prevent the water from collecting at the bottom of the refrigerator instead of flowing out.
You can also clean the drain hole by pouring half a glass of water down it.

Replacing the Light Bulb
Important note : Unplug the unit from the power supply before starting the process.

Replacing LED Lighting
To replace any of the LEDs, please contact the nearest Authorised Service Centre.

Note : The numbers and location of the LED strips may change according to the model.

Product equipped with LED lamp
This product contains a light source of energy efficiency class .

SHIPMENT AND REPOSITIONING: Transportation and Changing Positioning

The original packaging and foam may be kept for re-transportation (optional).
Fasten your appliance with thick packaging, bands or strong cords and follow the instructions for transportation on the packaging.
Remove all movable parts or fix them into the appliance against shocks using bands when re-positioning or transporting.

Always carry your appliance in the upright position

BEFORE CALLING AFTERSALES SERVICE
If you are experiencing a problem with your appliance, please check the following before contacting the after-sales service.

Your appliance is not operating
Check if:

The thermostat is set to the correct setting not in the off position
There is power
The plug is correctly placed in the socket
The plug fuse or the mains fuse has blown
The socket is defective. To check this,

plug another working appliance into the same socket.

The appliance performs poorly
Check if:

The appliance is overloaded
The appliance door is closed properly
There is any dust on the condenser
There is enough space near the rear and side walls.

The appliance is noisy:
The cooling gas that circulates in the refrigerator circuit may make a slight noise (bubbling sound) even when the compressor is not running. Do not worry, this is normal. If you hear a different sound, check whether:

The appliance is level
Anything is touching the rear of the appliance
Objects in the appliance are vibrating.

Your refrigerator is operating noisily:
The following noises can be heard during normal operation of the appliance

Normal noises:
Cracking noise occurs:

During automatic defrosting
When the appliance is cooled or warmed (due to expansion of appliance material).
Short cracking noise occurs : When the thermostat switches the compressor on/off.
Motor noise: Indicates the compressor is operating normally. The compressor may cause more noise for a short time when it is first activated.
Bubbling noise and splash occur: Due to the flow of the refrigerant in the tubes of the system.
Water-flowing noise occurs: Due to water flowing to the evaporation container. This noise is normal during defrosting.
Air-blowing noise occurs: In some models during normal operation of the system due to the circulation of air.
The edges of the appliance in contact with the door joint are warm: Especially during summer (warm seasons), the surfaces in contact with the door joint may become warmer during the operation of the compressor, this is normal.

The door does not open or close properly
Check if:

There is food or packaging preventing the door from closing
The door joints are broken or torn
Your appliance is on a level surface.
The decor door has been fitted correctly allowing the fridge door to seal easily.

There is a build-up of humidity inside the appliance
Check if:

All food is packed properly. Containers must be dry before being placed in the appliance.
The appliance door is opened frequently.

The humidity of the room enters the appliance when the doors are opened. Humidity increases faster when the doors are opened more frequently, especially if the humidity of the room is high.

There is water in the lower part of the refrigerator or on the shelves. As this is a Wet Wall fridge you will find under normal operation that moisture within the fridge will freeze to the back wall forming ice during the cooling phase (see below image). Once the appliance has reached the required temperature it will then stop running and go in to it’s Auto-Defrost mode within the fridge compartment which means that the ice on the back wall will start to defrost and form water droplets that will then run down the rear wall and in to the defrost channel.

Check if:
The drain hole for the water is not clogged (use a defrost drain plug to clean the drain hole if blocked). Make sure that nothing is touching the back wall as this will cause water to run on to shelves or bypass the drain hole, also if anything is touching the back wall it will freeze to the wall during the cooling phase.

Rear wall showing Ice Droplets during Cooling Phase.

TIPS FOR SAVING ENERGY

Install the appliance in a cool, well-ventilated room, but not in direct sunlight and not near a heat source (such as a radiator or oven) otherwise an insulating plate should be used.
Allow warm food and drinks to cool before placing them inside the appliance.
Place thawing food in the refrigerator compartment if available. The low temperature of the frozen food will help cool the refrigerator compartment while the food is thawing. This will save energy. Frozen food left to thaw outside of the appliance will result in a waste of energy.
Drinks or other liquids should be covered when inside the appliance. If left uncovered, the humidity inside the appliance will increase, therefore the appliance uses more energy. Keeping drinks and other liquids covered helps preserve their smell and taste.
Avoid keeping the doors open for long periods and opening the doors too frequently as warm air will enter the appliance and cause the compressor to switch on unnecessarily often.
Keep the covers of the different temperature compartments (such as the crisper) closed.
The door gasket must be clean and pliable. In case of wear, replace the gasket.

INFORMATION FOR TEST INSTITUTES
Appliance for any EcoDesign verification shall be compliant with EN 62552. Ventilation requirements, recess dimensions and minimum rear clearances shall be as stated in this User Manual at Chapter 2. Please contact the manufacturer for any other further information, including loading plans.

TECHNICAL DATA

The technical information is situated in the rating plate on the internal side of the appliance and on the energy label. The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database.
Keep the energy label for reference together with the user manual and all other documents provided with this appliance.
It is also possible to find the same information in EPREL using the link https://eprel.ec.europa.eu and the model name and product number that you find on the rating plate, the appliance.
See the link www.theenergylabel.eu for detailed information about the energy label.

CUSTOMER CARE AND SERVICE
Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, Serial Number and Service Index. The information can be found on the rating plate. You can find the rating label inside the fridge zone on the left lower side. The original spare parts for some specific components are available for a minimum of 7 or 10 years, based on the type of component, from the placing on the market of the last unit of the model.

Visit our website to: https://www.montpellier-appliances.com/

Here For You

After-sales assistance
If you continue to experience problems with your appliance, please call the Montpellier customer service helpline on 01759 487839

Please have all your product details available, including the model number, serial number, original sales invoice (clearly showing the model number, date of purchase, and your retailer’s details) before registering a fault. The service call cannot progress without this information.

Your 2-year Manufacturer’s guarantee
THIS DOES NOT AFFECT YOUR STATUTORY RIGHTS.
Your new Montpellier appliance carries a free guarantee which protects you against the cost of repairs during the first 24 months from date of purchase provided that: Any claim is accompanied by evidence of the model reference, model serial number and proof of purchase, such as a Sales Receipt, showing that the appliance was purchased within the 24 months prior to the date of claim.

What is not covered under the Guarantee

Any appliance not correctly installed and operated in accordance with the manufacturer’s instructions
Any appliance that is used for anything other than domestic purposes. Any defect caused by accident, misuse, unauthorized modification or inexpert repair.
Cost of Call-out where a fault cannot be found with the appliance.
Cost of Call-out for work covering routine maintenance, such as, but not exclusively, cleaning of filters or defrosting.
Cost of Call-out for work required to correct the alignment of doors following door reversal procedures carried out by you. Use of the appliance by anyone other than the Householder. Use in any commercial environment.
Consumable items, such as, but not exclusively, fuses in plugs, bulbs and breakable items which require routine replacement. Repair costs incurred that have not been authorized by Montpellier service and/or carried out by a non-approved Montpellier engineer.
Montpellier Appliances do not accept claims for consequential loss, rusting, corroding, delivery damage or scratches.

YOUR GUARANTEE IS VALID ONLY IN THE UK & REPUBLIC OF IRELAND
To register your appliance simply complete the card in your appliance pack and return it with a stamp affixed, alternatively, you can register online at www ,montpellier-appliances.com/support or by phone calling our warranty registration department on 0808 1961388

SERVICE HELP-LINE
Should your appliance develop a fault, please call the Montpellier customer service helpline on 01759 487839

Please remember to have all your product details available, including the model number, serial number, date of purchase, and your retailer’s details before registering a fault.

Montpellier Domestic Appliances Ltd.
Unit 1, Tewkesbury Retail Park, Northway Lane, Tewkesbury, Gloucestershire GL20 8JU

www.montpellier-appliances.com

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of the product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

FAQ

Q: What are the general safety instructions for the appliance?
A: Ensure the appliance stands for a minimum of 4 hours before initial use. Keep ventilation openings clear, do not accelerate defrosting with unauthorized devices, avoid using unauthorized electrical appliances inside storage compartments, prevent damage to the refrigerant circuit, position the appliance properly, and fix it securely as per instructions to avoid hazards.