THRON R2L2 XS LED Luminaire Instruction Manual
- July 31, 2024
- THRON
Table of Contents
R2L2 XS
Installation instructions
TYPE : R2L2 X
CLASS I
(CL1) CLASS II IK09 IP66
1
R2L2 XS
The luminaire with clear optic should be positioned so that prolonged staring into the luminaire at a distance <2 m is not expected.
|
R2L2 XS
---|---
MAX|
7.4 kg
SCx
|
0,05 m²
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
2
-
When closing
-
Wrong position
-
Correct position
-
Please clip on the correct position
3
Change the working angle
5
4
a) Maintain the gear tray
b) Change to a new gear
5
Cable assembly
a) CL1 only
b) Compact design luminaire, the cable as short as possible
6
CLASS I
CLASS I HFX
DALI
| 230V D1 D2
50/60Hz =|
---|---|---
7
CLASS II
CLASS II HFX
DALI
| 230V D1 D2
50/60Hz =|
---|---|---
8
(1) = ON
(2) = OFF
9
CLASS I / CLASS II
12Nm min
14Nm max
TOP
|
L
---|---
Ø60|
50mm
Ø76
|
35mm
|
L
---|---
Ø34|
50mm
Ø42
| 50mm
Ø49|
50mm
Ø60
|
35mm
SIDE
12Nm min
14Nm max
|
R2L2 XS
---|---
Ø34 + reducer #96269015 (59005840)|
Ø42 + reducer #96269015 (59005840)|
Ø49|
Ø60|
-Replace any cracked protective shield.
-Class II luminaires must be installed so that exposed metal work of the luminaire is not in contact with any part of the electrical installation connected to a protective conductor.
WARNING: Class I luminaires must be earthed.
-This luminaire operates at mains voltage which must be switched off before intervention in control gear.
-Any modification to this luminaire is forbidden.
-Lighted objects nearer than the minimal distance in the is forbidden
96370386 00 06/2024
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>