ZAGG MB167 Bluetooth Keyboard and Mouse User Guide

ZAGG MB167 Bluetooth Keyboard and Mouse

Specifications

Dimens ons

| Keyboard: 281.86 16.5521 .37mm

Mouse: 107.41 69.1441.09mm

Charging interface| Type-C
Mouse DPI| 800- 1200- 1600-2000-2400

Indicator lights Description

1. Charging indicator (Red:charging; Green:fully charged) / Battery low indicator(Red)
2. Capslock indicator(Green)
3. Power indicator(Green) / Pairing indicator(Blue)
4. Type-C charging port
5. Power switch(ON/OFF)

Keyboard Pairing Steps

1. Power on the keyboard. Slide the power switch to the “ON” side, the power indicator turns on green for 3 seconds, then turns off.
2. The keyboard enters pairing mode. Press and hold the Fn+ keys for 3-5 seconds. the LED indicator flashes blue rapidly, keyboard enters pairing mode.
3. Connected with the device. Turn on the device’s bluetooth function. it searches the keyboard’s pairing name “Bluetooth Keyboard” automatically. Click the pairing name, and the LED indicator keeps on 3s, then turns off. Connection successfully.
4. Change the device’s language to English(US), and ensure every character can be implemented.

Language Switching Guide

• Samsung Android: Shift +Space (Hold the “Shift” key always, and click the “Space” key, every clicking can change to the next language selection.)
• Google Android: CtrI+Space
• Windows: Win+ Space ¡OSI5 and above: Ctri+Space

Note
If your device does not have English(US) language selection, please check the following steps.

1. For iOS devices: Settings > General > Keyboard > Keyboards > Add new keyboard > Select “English(US)”
2. For Samsung Android devices: Settings > Controls > Language and input > Samsung Keyboard > Select “Input languages”‘ > Select “English(US)”
3. For Google Android devices: Settings > Language & input > Physical Keyboard > Set up keyboard layouts > Select “English(US)”
4. For Windows devices: Control Panel > Clock, Language and Region > Select “English(US)”

Mouse Pairing Steps

1. Power on the mouse. Slide the power button to the “ON” side.
2. Mouse enters pairing mode. Press and hold the side small button for 3-5 seconds until the LED flash blue rapidly.
3. Connected with the device. Turn on the device’s bluetooth function, it searches the keyboard’s pairing name “Bluetooth Mouse” automatically. Click the pairing name, the LED indicator keeps on 3s, then turns off. Connection successfully.

Charging

1. If the keyboard is flashing a RED light, it’s time to charge it. Once fully charged, the LeD turns green.
2. When the battery is low, the charging indicator will flash 10 times per second, please charge the mouse.

Keys Function

En lock function: Press to activate the fn lock function, no need to combine with the “Fn” key always. For example, when using the keyboard with an Android device, when do not activate the fn lock function, need to press it to implement Brightness decrease. After activating the fn lock function, just need to press the key directly.

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no quarantee that interterence will not occur in a particular installation. If this equipment does cause harmtul interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the tollowing of two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interterence received, including interterence that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>