LLURIA CN14,2 LED Strip Owner’s Manual

LLURIA CN14,2 LED Strip

Specifications

• Product Name: Water Resistant IP65 Comet New 14,2W/m
• Model: CN14,2
• LED Strip Type: Flexible LED strip
• Usage: Indoor and outdoor

Product Usage Instructions

Description

The Water Resistant IP65 Comet New 14,2W/m is a flexible LED strip suitable for decorative or accent lighting both indoors and outdoors.

Installation

1. Ensure the installation surface is clean and dry.
2. Measure and cut the LED strip to the desired length using appropriate tools.
3. Peel off the backing and carefully adhere the strip to the surface.
4. Connect the strip to a compatible power source following the manufacturer’s instructions.

Usage

• Once installed, the LED strip can be controlled using the provided power source or a compatible controller if applicable.
• Ensure proper ventilation for the longevity of the LEDs.

FAQ

• Q: Can the LED strip be used underwater?
• A: No, this LED strip is water-resistant (IP65 rated) for outdoor use but should not be submerged in water.
• Q: How can I cut the LED strip to size?
• A: The LED strip can be cut using appropriate cutting tools at designated cut points along the strip. Be sure to follow the cutting guidelines provided in the manual.

Flex LED strip ideal for decorative or accent lighting.
For indoor and outdoor use.

Technical data

• Power: 14,2W/m
• Roll power 5m: 71W
• IP: 65
• CRI: >80
• R9: >60
• Voltage: 24V
• LEDs/m: 60
• Pitch: 16,7mm
• Beam angle: 120º
• Min. cutting length: 100mm
• Roll length: 5m/30m
• Lifetime: 50.000h
• Ambient temperature: -20~50ºC
• Storage temperature: -40~80ºC
• Warranty years: 8
• Dimmable: Yes
• Needs heatsink: Yes
• Max. length: 20m (1)

(1) Conectadas en serie Connected in series

3 MacAdam steps

CDL

FEATURES

Dimensions

Circuit diagram

• Respect the maximum lengths to avoid drops in voltage and variations in light intensity.

Cable section

Distance LED – Profile

• Minimum distance that should be left at the ends, both sides, between LED strip and profile.

Assembly detail
Do not bend de LED strip to adapt them to a sharp radius or angle, cut for the cut mark and weld a section of cable to make the turn.

Lifetime

• The lifetime of our LEDs is 50.000h at an ambient temperature of 23ºC and provided with a heat dissipation system.
• Off cycles are recommended to extend the life of the LEDs.

Warnings

• To ensure the life of the LED, it is requested to be placed on a surface that dissipates the heat it generates.
• Caution when handling cables to avoid damage to the welds.
• The voltage surges can cause damage.
• If the diffuser is used with the dissipating profile, there may be variations in the color temperature.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>