LLURIA CN13-9-23 Water Resistant Comet New Flex LED Strip Owner’s Manual
- July 29, 2024
- LLURIA
Table of Contents
LLURIA CN13-9-23 Water Resistant Comet New Flex LED Strip
Product Information
- Product Name: Comet New 13,9W/m CN13,9 Flex LED strip
- Water Resistance: IP65
- Light Quality: High
- Applications: Indoor and outdoor installations for general and accent lighting
Product Usage Instructions
Installation:
- Ensure the surface where the LED strip will be mounted is clean and dry.
- Peel off the adhesive backing of the LED strip and carefully place it on the desired surface.
- Connect the strip as per the specified series connection instructions.
- Secure any loose sections of the strip with appropriate clips or adhesive.
- Ensure proper electrical connections are made following safety guidelines.
Maintenance:
Regularly inspect the LED strip for any damage or signs of wear. Clean gently
with a soft, dry cloth if needed. Avoid using harsh chemicals or abrasive
materials.
Usage Tips:
- Avoid bending the LED strip excessively to prevent damage to the LEDs.
- Operate the strip within the specified voltage and temperature ranges for optimal performance.
- If using outdoors, ensure the connections are properly sealed to prevent water ingress.
FAQ:
-
Q: Can the LED strip be cut to a specific length?
A: Yes, the LED strip can be cut at designated cut points to achieve a custom length. -
Q: Are connectors or additional accessories required for installation?
A: Connectors or extension cables may be necessary based on the installation layout. Please refer to the installation manual for details.
Flex LED strip with high light quality. Ideal for all types of installations, general and accent lighting. Excellent uniformity due to the little separation between the LEDs. For indoor and outdoor use.
Features
Technical Data
| Power | 13,9W/m |
|---|---|
| Roll power 5m | 69,5W |
| IP | 65 |
| CRI | >90 |
| R9 | >60 |
| Voltage | 24V |
| LED type | 2835 |
| LEDs/m | 180 |
| Pitch | 5,6mm |
| Beam angle | 120º |
| Min. cutting lenght | 33,3mm |
| Roll length | 5m/30m |
| Life time | 50.000h |
| Ambient temperature | -20~50ºC |
| Storage temperature | -40~80ºC |
| Warranty years | 8 |
| Dimmable | Yes |
Needs heatsink
Max. lenght
| Yes
20m (1)
- Connected in series
3 MacAdam steps
CDL
Dimensions
Circuit diagram
Respect the maximum lengths to avoid drops in voltage and variations in light intensity.
Cable section
Cable
Distance LED – Profile
The minimum distance that should be left at the ends, both sides, between LED strip and profile.
Assembly detail
Do not bend de LED strip to adapt them to sharp radius or angle, cut for the cut mark and weld a section of cable to make the turn.
Life time
- The lifetime of our LEDs is 50.000h at an ambient temperature of 23ºC and provided with a heat dissipation system.
- Off cycles are recommended to extend the life of the LEDs.
Safety Warnings
- To ensure the life of the LED, it is requested to be placed on a surface that dissipates the heat it generates.
- Caution when handling cables to avoid damage to the welds.
- The voltage surges can cause damage.
- If the diffuser is used with the dissipating profile, there may be variations in the color temperature.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>