JBL Cinema 510 5.1 Speaker System User Guide
- July 29, 2024
- JBL
Table of Contents
JBL Cinema 510 5.1 Speaker System
Product Information
Specifications
- Model: Cinema 510
- Amplifier: Receiver or Subwoofer Level Amplifier
- Subwoofer LFE Out: Mono RCA Cable (included)
- Signal-to-Noise Ratio: 109 dB
- Impedance: 8 Ohms
Product Usage Instructions
Step 1: Setting Up the Cinema 510
Connect the Cinema 510 to your audio/video receiver (AVR) by following these steps:
- Connect the red switch labeled ‘+’ to the corresponding terminal on the AVR.
- Connect the wire with a white stripe labeled ‘-‘ to the matching terminal on the AVR.
- Connect the Subwoofer LFE Out using the provided Mono RCA Cable.
Step 2: Speaker Configuration
Ensure that the speakers are set up correctly for optimal sound quality:
- Front Left (FL) and Front Right (FR)
- Surround Left (SL) and Surround Right (SR)
- Center (C)
FAQ
- Q: What is the purpose of the red switch and wire with a white stripe?
- A: The red switch marked ‘+’ is used for a positive terminal connection, while the wire with a white stripe marked ‘-‘ is for a negative terminal connection. Correctly wiring these ensures proper signal transmission.
OVERVIEW
CONNECTION
Specifications
- Frequency response: 46Hz –20kHz
- Maximum SPL: 109 dB
- Power (sub): 60W
- Satellites
- Impedance: 4 ohms nominal
- Recommended power: 10 – 100 watts
- Subwoofer
- Low-frequency transducer: 6,5″ (165mm) cone
- Amplifier power: 60 watts RMS
- Enclosure type: Bass Reflex
Read User Manual Online (PDF format)
Loading......