UltraLux SPL45CCTW Ceiling Light With Remote Control Installation Guide
- July 29, 2024
- ULTRALUX
Table of Contents
UltraLux SPL45CCTW Ceiling Light With Remote Control
TECHNICAL PARAMETERS
- Power: ……………………………………………………………………………………………………. .45W
- Supply voltage: …………………………………………………………….. 220-240 V AC/ 50-60 Hz
- Displacement factor: …………………………………………………………………………….. DF.:0.9
- Luminous flux: …………………………………………………………………………………….. 4800 Im
- Dimming range: ……………………………………………………………………………..1 0%-100%
- Correlated color temperature: …………………………………………………….3000 K – 6000 K
- Color rendering index: ………………………………………………………………………….. Ra.: 80
- Beam angle: …………………………………………………………………………………………….. 120°
- Control method: ……………………………………………………………………… IR remote control
- Control range: ………………………………………………………………………….1 0 m (open area)
- Battery: ………………………………………………………………………………….. 2×1.5V rnn AAA
- Dimensions: ……………………………………………………………………………….. 0480×70 mm
- IP rate: …………………………………………………………………………………………………….. IP20
- Warranty: …………………………………………………………………………………………….. 2 years
SAFETY INSTRUCTIONS
- Performing any actions while electric voltage is applied carries a potential risk of electric shock.
- The power supply must be disconnected before starting any work.
- The product should be connected to a power supply of a proper electrical installation, meeting the requirements of a qualified specialist.
- The product installation should be carried out by the provided diagram.
- The product may heat up during operation, so please wait for it to cool down before replacement.
- Clean with a dry cloth.
- Do not cover the product. To avoid the risk of fire, ensure free access of air to the heating elements.
- If the power cable of the product is damaged, it must be replaced by the manufacturer, its authorized representative, or a technically qualified specialist to prevent accidents and damage.
- Before turning on the luminaire, make sure that its installation has been done correctly, eliminating the risk of malfunction, hazards to the environment, and users.
- The importer (supplier) is not responsible for damages resulting from failure to follow the above installation recommendations.
TAKING CARE OF THE NATURAL ENVIRONMENT CLEANLINESS
- The product and its components are not harmful to the environment.
- Please dispose the package elements separately in containers for the corresponding material.
- Please dispose the broken product separately in containers for out-of-usage electrical A-equipment.
MOUNTING
- Turn off the power supply before starting any work.
- Disassemble the ceiling lamp. Rotate the diffuser counterclockwise while keeping the base stationary.
- Fix the base to the mounting surface using appropriate fasteners (you can use the included mounting fasteners).
- Connect the ceiling lamp to the power cable following the provided wiring diagram:
- Mount the diffuser onto the base of the ceiling lamp. Rotate the diffuser clockwise.
DESCRIPTION OF THE REMOTE CONTROL
MEMORY FUNCTION WHEN POWER IS TURNED OFF
- Adjust the brightness and color temperature of the ceiling lamp according to your preferences.
- Allow the LED ceiling lamp to operate in the selected mode for more than 5 seconds.
- In case of a power outage and subsequent restoration (turning off and on using the wall switch), the ceiling light will operate with the saved settings.
- Rapid power toggles where the ceiling light operates for less than 5 seconds will result in a change of the light’s color temperature to 3000K-> 4000K-> 6000K.
This product contains a light source of energy efficiency class E.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>