QAZQA Femke WL 1 Black Lux Outdoor Wall Lamp Instruction Manual

: July 27, 2024
: QAZQA

Table of Contents

QAZQA Femke WL 1 Black Lux Outdoor Wall Lamp
SAFETY INSTRUCTION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

QAZQA Femke WL 1 Black Lux Outdoor Wall Lamp

SAFETY INSTRUCTION

Important : Product must be installed by a qualified electrician
Automatic : Fitting will operate on and off automatically at dusk and dawn.
Time Delay: Fitting incorporates a time delay to prevent accidental trigger operation by car headlights and flashes.
Pre-set 15-30sec delay to avoid false trigger (approx.).
Ambient Light: 5~45Lumen (approx.).

Avoid a position where direct light from another source can fall on the control.
Position out of direct sunlight if possible (not essential).

Please study the instruction manual and below information carefully before installing or using this product.
Please keep this user manual for further reference

The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
Exterior lighting must not be installed during rain.
Take account of the minimal separation distance from other objects and the room required around the fitting.
If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on ell electrical components
Take account of all available technical information.
Meaning of symbols:

This icon indicates the level of water-proof and dust-proof

Protection Closs I: the fitting must be earthed

Protection Class II: the fitting is doubled insulated and does not require earthing

Protection Closs Ill: the fitting is low voltage

Minimum distance from lighted objects (meters)The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons

The armature is designed to work only with the indicated voltage. Different items require different working voltage.

The luminaire con be used in combination with o dimmer

The luminoire can be dimmed wall switch

The reference light angle and light space of the luminaire

This luminaire cannot be disposed together with normal domestic waste in standard rubbish con, but you have to bring it to a staging area for electrical waste

Take note of the symbols when connecting wires: