PawHut IN230600469V02_GL Wicker Dog House Instruction Manual
- July 27, 2024
- PawHut
Table of Contents
PawHut IN230600469V02_GL Wicker Dog House
Product Information
Specifications
- Model: IN230600469V02_GL
- Version: IN230600469V01_GL_D10-051
- Dimensions: A 1 D 1 G 1 J 4 O 4
- Weight: PALISRTT
- Components: B 1 E 1 H 2 K 4 P 8
- Additional Features: C 2 F 1 I 2 M 3 Q 1
Product Usage Instructions
- Step 1: Unpack the product carefully and ensure all components are included.
- Step 2: Assemble the product according to the provided manual.
- Step 3: Connect the necessary cables and power on the product.
- Step 4: Follow the on-screen instructions for initial setup.
- Step 5: Start using the product for your intended purposes.
FAQ
- Q: How do I troubleshoot if the product is not working?
- A: If the product is not functioning properly, try the following steps:
- Q: Can I disassemble the product for cleaning?
- A: It is not recommended to disassemble the product for cleaning unless stated otherwise in the manual. Contact customer support for specific cleaning instructions.
- Q: How do I update the software of the product?
- A: To update the software, follow these steps:
IMPORTANT. RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
PARTS
NOTE: Do not tighten bolts fully until all parts are connected!
Installation Instructions
-
Connect PART A and PART B to PART H and tighten the screws and washers with the wrench.
-
Insert PART C into the holes in PART H, and insert PART I into PART C, then tighten the screws and washers from the holes in PART H, and insert PART I into PART C, then tighten the screws and washers from the holes in PART H. C, then tighten the screws and washers from the front side. the front side.
-
Insert PART D and PART E into the top holes of PART A and PART B with the side legs, then tighten the screws and washers from the back.
-
Insert PART F and PART G (the tray).
-
Insert PART J into PART C, then insert PART K; insert PART K to PART A and PART B.
-
Open the door at PART A and mount the sling bars near PART J; open PART D and PART E and mount PART M.
Done
- Insert four casters into the end of the feet and fix them with the key.
CONTACT
If you have any questions, please contact our customer care center, Our contact details are below:
US
- 001-877-644-9366
- customerservice@aosom.com
- Imported by Aosom LLC
- 27150 SW Kinsman Rd Wilsonville, OR 97070 USA
- MADE IN CHINA
UK
If you have any questions, please contact our customer care center, Our contact details are below:
- 0044-800-240-4004
- enquiries@mhstar.co.uk
- IMPORTER ADDRESS:
- MH STAR UK LTD
- Unit 27, Perivale Park,
- Horsenden Lane South
- Perivale, UB6 7RH
- MADE IN CHINA