plus Opto PF5000x10-560DN2835W-13W-24V High Efficiency Flexible LED Strip Owner’s Manual
- July 26, 2024
- plus opto
Table of Contents
**plus Opto PF5000x10-560DN2835W-13W-24V High Efficiency Flexible LED Strip Owner’s Manual
**
Features
- High Efficient 200lm/W 2835 LED emitters
- 3 SDM binning 1 bin
- Choice of CRI
- Easy to cut at 4mm intervals
- Wide 120° angle of emission
- Onboard CC regulation
- Complies with European ErP
- 5 Year warranty
Applications: POS Display equipment & Back lighting
Configuration
| Parameter | Rating | Unit |
|---|---|---|
| **** LED emitters PLCC 2835 | 560 pcs 2.8×3.5mm | TOTAL / reel |
| 112 pcs 2.8×3.5mm | /metre | |
| LED pitch | 8.90 | mm |
| Dimensions 24vdc | 5000x10mm cuttable every 8 LEDs at 71.4mm intervals | |
| Termination | 2x Flying wire leads 200mm long |
Electrical Characteristics
| Parameter | 24v Rating | Unit | |
|---|---|---|---|
| Input Voltage | 24v Typical | Vdc | |
| Current consumption / metre (max) | 0.54A | mA/m | |
| Current consumption total (max) | 2.3A | A/ TOT / reel | |
| Power consumption / metre (max) | 13.5W | W/m | |
| Power consumption total (max) | 67.5W +/- 5% | W/TOT / reel | |
| Operating Temp | -20 to +40°C (Tc@75°C max) | °C | |
| Storage Temp | -10 to +55°C | °C |
Electro-optical characteristics
**Part No.| ****Colour| ****CCT typ.| Luminous Flux
(lm/M) Ra >80| Luminous Flux (lm/M) Ra >90| Viewing
Angle
---|---|---|---|---|---
PF5000x10-560DN2835PW-24V| Pure White| 6500K| 2545| 2070| **
120°
PF5000x10-560DN2835DW-24V| Daylight White| 5000K| 2655| 2155
PF5000x10-560DN2835NAW-24V| Natural White| 4000K| 2660| 2110
PF5000x10-560DN2835WW-24V| Warm White| 2700K| 2525| 1960
PF5000x10-560DN2835EWW-24V| Extra Warm White| 2300K| 2250| 1805
PF5000x10-560DN2835SWW-24V| Super Warm White| 1900K| 1620| 2665
Notes:
CRI Ra.95 also available Other CCT’s available
Dimensions
Optional encapsulation is available to provide IP62 rating
Handling notes:
Ensure that the correct low voltage dc power supply is matched to the flexible
strip specification
Avoid repeated bending of the strip as this will damage the circuit and
components and please observe the maximum bend radius of 30mm
Avoid handling of the surface components in particular the LED emitters as any
pressure may result in damage and latent failures.
When cutting IP rated strips the ingress protection will be compromised please
ensure that the assembly is re-sealed accordingly in order to maintain the IP
rating
Installation notes:
To achieve a consistent luminous effect, each 5 metre should be connected to
the power source.
To ensure long life we recommend that the strip is kept as cool as possible
and environments where the temperature exceeds 40°C should be avoided
Drive & Control:
For control solutions please refer to our range of controllers and drive
options which include DMX, RF Wireless, WiFi. More information may be found at
http://www.plusopto.co.uk/led-controllers.html
Specifications may be subject to change without notice
T +44 (0) 1942 671122
E sales@plusopto.co.uk
W www.plusopto.co.uk
B13 Derwent Court William Way Moss Industrial Estate Leigh Lancashire WN7 3PT