plus opto LF-GMR Series Constant Current LED Drivers Installation Guide
- October 30, 2023
- plus opto
Table of Contents
plus opto LF-GMR Series Constant Current LED Drivers
Product Information
- The Constant Current LED Drivers 20W-80W are a comprehensive range of drivers designed specifically for LED applications. They are IP rated for both indoor and outdoor use, making them suitable for a wide range of lighting fixtures. The drivers operate in Constant Current mode, ensuring consistent and reliable power supply to the LEDs. They are flicker-free, providing a stable and comfortable lighting experience.
- The drivers feature a selectable constant current output, which can be adjusted using the DIP switch. This allows for flexibility in powering different types of LED products. The drivers have a metal case, ensuring durability and protection for the internal components. With a high efficiency of over 85% and a power factor of over 0.95, these drivers are energy-efficient and help reduce electricity consumption.
- The Constant Current LED Drivers 20W-80W come with built-in protection features including Short Circuit Protection (SCP), Over Voltage Protection (OVP), and Over Current Protection (OCP). These safeguards help prevent damage to the drivers and connected LED products. The drivers have received international certifications including ENEC, CE, CB, and RCM, ensuring their compliance with safety and quality standards.
- Please note that the specifications provided here are for reference only. For the latest and most accurate specifications, we recommend checking the full data sheet.
Product Usage Instructions
- Ensure that the power supply is turned off before connecting the Constant Current LED Driver to any LED lighting fixture.
- Identify the desired constant current output required for your LED product. This information can usually be found in the LED product’s specifications or datasheet.
- Locate the DIP switch on the Constant Current LED Driver.
- Refer to the DIP switch position table in the user manual or datasheet to determine the appropriate switch configuration for the desired constant current output.
- Using a small screwdriver or similar tool, adjust the DIP switches accordingly to set the constant current output.
- Ensure that the DIP switches are securely set in the desired position.
- Connect the Constant Current LED Driver to the LED lighting fixture, ensuring proper polarity and secure connections.
- Turn on the power supply and verify that the LED lighting fixture is operating correctly with the desired constant current output.
- If any issues or abnormalities are observed, refer to the troubleshooting section of the user manual or contact our customer support for assistance.
Constant Current LED Drivers 20W‐80W
To support our extensive range of LED products we offer a comprehensive range of constant current LED drivers with selectable output current designed specifically for LED applications. The LF-GMR series is IP rated for indoor & outdoor applications.
Features
- Constant Current mode power supply
- Flicker free
- Selectable constant current output by DIP switch
- Metal case
- High efficiency >85%
- PF >0.95
- Protection: SCP/ OVP / OCP
- International approvals
- Suitable for Class 1 lighting fixtures
Specifications
Certifications
ENEC, CE, CB and RCM
Notes:
This data is for selection reference only. Please check the full data sheet
for the latest specifications
Specifications may be subject to change without notice
Т +44 (0) 1942 671122
E sales@plusopto.co.uk
W www.plusopto.co.uk
B13 Derwent Court William Way Moss Industrial Estate Leigh Lancashire WN7 3PT
Read User Manual Online (PDF format)
Loading......