QAZQA 104268 Finn CL 40 Copper Ceiling Lamp Instruction Manual
- July 27, 2024
- QAZQA
Table of Contents
QAZQA 104268 Finn CL 40 Copper Ceiling Lamp
Specifications
- Model: Finn CL 40 Copper 104268
- Socket Type: E27
- Maximum Wattage: 40W
- Working Voltage : 220-240V~
- Dimmable : Yes
- Light Angle: Adjustable
Product Usage Instructions
Safety Instructions:
- Installation should be done by authorized and qualified technicians following electrical regulations.
- Maintenance should only involve surface cleaning; avoid moisture contact with internal parts.
- Always switch off the electrical supply before installation, maintenance, or repair work.
- Avoid installing exterior lighting during rainy conditions.
- Ensure proper separation distance from other objects and sufficient room around the fitting.
- If unsure, consult a professional considering local installation requirements.
- Tighten clamping screws in electrical connections securely, especially for low-voltage conductors.
- Clean with a dry cloth or brush; do not use solvents or abrasives. Keep electrical components dry.
- Refer to the technical information provided and adhere to lamp type and wattage restrictions.
- Understand the meaning of symbols like IPXX, Protection Classes, and other icons related to the product.
FAQ
- Q: Can this luminaire be dimmed?
- A: Yes, the luminaire can be used in combination with a dimmer.
- Q: What is the maximum wattage for this product?
- A : The maximum wattage supported is 40W.
- Q: Is earthing required for this product?
- A : The product supports Protection Class II and does not require earthing.
Safety Precautions
INSTALLATION
Finn CL 40 Copper 104268
DIMENSION
SAFETY INSTRUCTION
Please study the instruction manual and the below information carefully before installing or using this product. Please keep this user manual for further reference
- The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
- Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
- The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
- Exterior lighting must not be installed during rain.
- Take account of the minimal separation distance from other objects and the room required around the fitting.
- If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
- Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
- Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
- Take account of all available technical information.
- Meaning of symbols:
-
* This icon indicates the level of water-proof and dust-proof
- Protection Class I: the fitting must be earthed
- Protection Class Il: the fitting is doubled insulated and does not require earthing
- Protection Class Ill: the fitting is low-voltage
- Minimum distance from lighted objects (meters)
- The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceeded; different items require different kinds of light sources with different bulb icons
- The armature is designed to work only with the indicated voltage. Different items require different working voltages.
- The luminaire can be used in combination with a dimmer
- The luminaire can be dimmed by the wall switch
- The reference light angle and light space of the luminaire
- This luminaire cannot be disposed of together with normal domestic waste in a standard rubbish can, but you have to bring it to a staging area for electrical waste
Take note of the symbols when connecting wires
- L Live conductor
- Earth conductor
- N Neutral conductor
CONTACT
FittinQ B.V.AC
- Smaragdweg 52, 5527 LB Hapert, The Netherlands
- www.qazqa.nl
FittinQ B.V
- 55 Baker Street,
- London, W1U7EU
- United Kingdom
References
Read User Manual Online (PDF format)
Loading......