sunlighten KANSAS150 Car DVD CD Player Instruction Manual

sunlighten KANSAS150 Car DVD CD Player

Specifications

• Model: Kansas City 150
• Power/Mute Button: Controls power and mute functions
• Home Button: Navigates to the source menu
• Volume Control: Buttons to adjust audio volume

Product Usage Instructions

Safety Notes

The audio system complies with safety guidelines. Always observe safety notes to prevent dangers.  Listening devices, and playing audio via Bluetooth streaming.

FAQ:
Q: How do I mute the audio source?
A: Briefly press the POWER/MUTE button to mute the audio source. Press it again to unmute.

Kansas City 150

Operating instructions

1. POWER/MUTE button

   • Short press: Turn ON device;
   • In operation: Mute audio source;
   • Long press: Turn OFF device

2. HOME button
   Go to source menu

3. BACK button
   Press to return to previous menu

4. Press this button to decrease audio volume

5. Press this button to increase audio volume

Safety notes

The audio system was manufactured according to recommended and established safety guidelines in a state of the art facility. Even so, dangers may occur if you do not observe the safety notes in the instruction manual.
These instructions are intended to familiarise you with important functions.

• For best results, please read the user manual carefully and completely before using the audio system.
• Always keep the user manual accessible to all users.
• Always handover the audio system to any third party along with these instructions.
• In addition, observe the instructions of the devices used in combination with this audio system.

General Warning

To avoid any injury or damage to yourself and others, please make sure to do as following. Observe the following note to protect yourself against injuries:

• Do not modify or open the device. Do not do any unauthorised modification to the device. In case you need any assistance, please visit the nearest service centre. The device should be open by an authorised person only.
• Use as Directed: this audio system is intended for installation and operation with 12V (negative ground) voltage. Observe the output limits of the device. Only an authorised specialist should perform repairs and installation, if necessary.

Observe the following notes about road safety:
To avoid any injury or damage to yourself, your car and others, please make sure to do as following. Observe the following note to protect yourself against injuries:

• Before using this unit, please read all related instructions carefully.
• Any damage to this unit caused by improper operations will void the warranty.
• To avoid short circuit, please do not dispose the unit into the water and please do not place or leave any kind of metal object (such as a coin or metal tools) in the unit.
• Please operate the unit as per this Manual, it is not allowed to open the unit for maintenance; In case if maintenance is required, please seek professional help.

Instructions to read this User Manual
Illustrations are used in this manual to explain operations and precautions. The illustrations used in this manual are only for reference, please take the actual unit as standard.

Declaration of conformity
We declares that the device complies with the basic requirements and the other relevant regulations of the RED Directive 2014/53/EU.

Cleaning notes

• Solvents, cleaning and scouring agents as well as dashboard spray and plastics care products may contain ingredients that will damage the surface & screen ofthe audio system.
• Use only a dry or slightly moistened cloth for cleaning the audio system.

Disposal notes

• Do not dispose of your old unit/batteries in the household trash.
• Use the return and collection systems available to dispose of the old device.

Placing the device in operation
Switching ON/OFF with the POWER button

• To switch-ON, press the [ ] button.
• To switch-OFF, hold the [ ] button pressed for more than 2 seconds.

Volume

Adjusting the volume

• You can adjust the volume in steps from 0 (off) to 30 (maximum).
• Press the button [ ] to raise volume and [ – ] button to lower the volume.

Muting the sound system (Mute)

• Briefly press the [ ] button to mute the device or to reactivate the previous volume.

Main menu(Home)
In the main menu, press the buttons on the touchscreen to call up the different sources and operating modes.
In the current source, press the [ ] button. The main menu is displayed.

1. Top bar: Drag down to see more functions
2. Enter Wallpaper menu
3.  Enter corresponding source menu
4. Back
5. Enter main menu
6. Show background apps

Swipe left on the screen to see more source icons.

Note:
The figures used in these instructions are intended to facilitate the explanations and details may deviate from your device.

Sound Settings

Equalizer
You can adjust the equalizer for all sources.

• Press [ EQ ] on the main menu.
  The equalizer menu is displayed.

• Select a preset equalizer via preset buttons – Flat / POP / Easy / Rock / Classic / Jazz / User1 / User2.
  – Or –

• Press the [ User ] button to adjust the level of the available frequency bands according to your preferences.

Note:
With the [ Reset ] button, you can reset the customised setting again. – Or –

• Press the [ Flat ] button for a linear sound playback.
• Turn on the [ Loudness ] to increase bass and treble at low volume.

Volume distribution (Fader/Balance)
You can adjust the volume distribution in the vehicle for all sources.

• Press the [ ] button in EQ menu.
  The menu for fader and balance is displayed.

• Press the arrow buttons or drag the cursor to adjust fader and balance.

USB media playback
The audio system is equipped with USB port to play MP3 or WMA files on USB data carriers.
In addition, you can view movies and images from USB data carriers on the display or a connected monitor.
For safety reasons, the playback of movies and images on the integrated monitor is allowed only while the vehicle is in parked mode and the handbrake is applied. The “PARKING” cable must be connected with the hand brake connection of the vehicle (see Connection diagram at the end of these instructions). The movie playback on an external monitor is also possible while driving.

Notes:
We cannot guarantee that all USB pen drives are compatible with this audio system.

USB data carrier
This device features USB port at the rear of the device.

Connecting a USB data carrier

Insert the USB data carrier in the USB socket.
The device automatically switches to USB mode. Data is read and playback commences.

Audio playback from USB
The principles of the audio playback (MP3/WMA) from data carriers are identical for all sources.

• Select the [ Music ] source via the main menu.
  The device changes to the USB source and the playback starts.

1. Progress Bar
2. Sound effect
3. Display the folder/file list
4. Previous track
5. Pause playback and Resume playback
6. Next track
7. Repeat/Random play

Folder/file list

Briefly tap on the name of the folder/track. The folder is opened/the track commences.
After starting a title, the playback menu is displayed.

Bluetooth mode

The Bluetooth® function allows pairing cell phones and media playback devices with the sound system.
When a cell phone is paired with the sound system. If the connected Bluetooth® device supports the functions A2DP and AVRCP, you can play the music via the sound system and control the playback.

Starting Bluetooth mode

• In the main menu, press on [ BT Music ].
• The Bluetooth® menu is displayed. It contains the list of known Bluetooth® devices. Other audio sources are switched off.

Registering Bluetooth devices
If you want to register a device with the sound system for the first time, proceed as follows:

• Ensure that Bluetooth® is activated at the sound system and at your Bluetooth® device.
• Search for new devices/connections on your Bluetooth® device.
• The sound system appears as “SUNLIGHTEN” in the list of Bluetooth® devices.
• Establish the connection; you may have to enter the pairing code that was previously entered on the sound system.
• The connection is being established and the menu for the registered device is displayed.

Note:
If a telephone is connected with the audio system, the Bluetooth® icon is lighted at the top of the display in all audio/video sources.

Audio playback via Bluetooth streaming
If an audio streaming device is connected with the audio system via Bluetooth®, you can play back the music via the audio system and control the playback.

• Short press: Title selection.
• Pause playback and Resume playback
•  Short press: Title selection.

CFile Manager

• Select [ Files ] in the main menu to enter File Manager menu.
• Select the desired folder to access your files.

1. Files type/source
2. Search
3. List mode
4. Operation menu

Settings
In the settings menu, you can adjust the basic settings for the different functions of the device to your requirements.

• In the main menu, press the [ Tablet Special Settings ] button. The settings menu is displayed.
• Call up the submenus with the buttons in the lower area of the settings menu.

General
Select an option to access/setup.

Wi-Fi

• Turn on the Wi-Fi and search the available networks.
• Select a hotspot to connect.

Language

• Select OSD language from the list.

SourceVolumeLevel

• Set the Voluem Level of each Source.

Key Light

• Set the color of Keys on the front display.

Factory

• Acess Factory configuration
  Default Password: 8888

Android Settings

• Enter Android Settings menu.

Upgrade & Reset

• Upgrade the software & Reset the default settings.

System Info

• View System Information.

Installation

Install the main unit

To  the unit to the carrier, fasten the 4 screws to the carrier through the mounting holes of unit.

Connect the unit and display

Troubleshooting

What appears to be trouble is not always serious. Please check the following points before calling a service center.

General
Unit can not power on| Unit fuse blown.| Install new fuse with correct rating.
Illegal operation| Reset the unit.
No/low audio output| Improper audio output connection.| Check wiring and correct.
Volume set too low.| Increase volume level.
Speakers damaged.| Replace speakers.
Heavily biased volume balance.| Adjust the channel balance to center position.
Speaker wiring is in contact with metal part of car.| Insulate all speaker wiring connections.
Poor sound quality or distortion| Speaker power rating does not match unit.| Replace speakers.
Wrong connections.| Check wiring and correct.
Speaker is shorted.| Check wiring and correct.
Unit resets itself when engine is off| Incorrect connection between ACC and BATT.| Check wiring and correct.
TFT monitor
Flashing image or interference appears on screen| Video cable damaged.| Replace cables.
Improper video signal connections.| Check wiring and correct.

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
2. This device may not cause harmful interference.
3. This device must accept any interference received, including interference that may cause undesired operation.
4. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
   This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 centimeters between the radiator and your body.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>