FINEDAY FD-Slim-Al83 Slim Aluminum 83 Keyboard User Manual
- July 26, 2024
- FINEDAY
Table of Contents
FINEDAY FD-Slim-Al83 Slim Aluminum 83 Keyboard
Product Information
Specifications
- Product Name: FINEDAY Slim Aluminum 83 Keyboard
- Model: FD-Slim-Al83
- Type: Mechanical Bluetooth Keyboard
- Connection: Bluetooth and Wired
- LED Backlight: Yes
- Bluetooth Channels: 3
- Compatibility: Windows and Mac OS
Product Usage Instructions
Bluetooth/Wired Mode Switching
The 3rd indicator light should be green for Bluetooth mode and red for
wired mode. Press Fn+Tab to switch between the connection modes.
Bluetooth Channel Selection
Use Fn+1, Fn+2, and Fn+3 to switch between three Bluetooth channels. Press
Fn+Tab to toggle between Bluetooth and USB modes.
Operating System Switching:
Press Fn+- or Fn+= to switch between Windows and Mac OS.
LED Backlight Control
Press Fn+L to change the LED backlight pattern. In wireless mode, use
Fn+Esc for power-saving mode, and in wired mode, use Fn+Esc to toggle the LED
backlight on/off.
Warnings
This device complies with FCC Rules. Users are advised to follow guidelines
for avoiding interference and maintaining proper operation of the device.
RF Exposure
The device meets RF exposure requirements and can be used in portable
conditions without restrictions.
FAQ
Q: How do I know if the keyboard is in Bluetooth mode or wired mode?
A: Check the color of the 3rd indicator light – green indicates Bluetooth
mode, while red indicates wired mode.
FINEDAY Slim Aluminum 83 Keyboard
User Manual
FD-Slim-Al83 Mechanical Bluetooth Keyboard
-
For user safety, please be sure to read before using the product and use it correctly.
-
Contents (exterior design and specifications) described in this user manual are subject to change without prior notice to improve product quality.
-
FINEDAY Slim Aluminum 83 Keyboard features a built-in 2000mAh battery, offering both wireless and wired functionality. You can charge it as needed using the included cable.
-
1st light: low battery indicator
-
2nd light: Caps Lock mode indicator
-
3rd light: Red – wired mode / Green – wireless mode
The 3rd indicator light needs to be green for the Bluetooth mode, while red light is wired mode. (Fn+Tab changes the connection mode.)
Fn+1, 2, 3 for switching three Bluetooth channels. Fn+Tab key is Bluetooth/USB changing mode.
- FN+0: Paring key – Pair after green light is blinking
- Paring name: FINEDAY SlimA
- BT1: FN+1 and FN+0
- BT2: FN+2 and FN+0
- BT3: FN+3 and FN+0
Fn+-, =: Window and Mac OS changing shortcut
Fn+L changes the LED backlight pattern
Fn+Esc
- In wireless mode (the 3rd LED indicator light is green), Fn+Esc is a power saving mode.
- In wired mode (the 3rd LED indicator is red), Fn+Esc turns on/off the LED backlight.
FCC
Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
RF exposure:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>