TURTLE BEACH VelocityOne Race Wheel and Pedal System User Manual

TURTLE BEACH VelocityOne Race Wheel and Pedal System

Specifications

• Platform: PC (D-input) & XBOX ONE
• Support System: Microsoft Windows 8/10/11, XBOX ONE platform (Microsoft license)
• Display: LCD screen
• Picks: Designed with Hall chip contactless switch for longer service life
• Emergency Stop Switch: Base and console provided
• Power Supply: 24VDC/5A high power adapter
• Local Interface: Main interface: XBOX/PC, Expansion Ports 1 and 2
• Working Current: Less than 200mA when motor is not rotating, up to 6A when rotating
• Bluetooth Support: Wireless mobile APP game programming configuration, Firmware upgrade

Product Diagram

• Wheel Front: LT Y X Button, Turn Switch, Left  encoder DPAD, ABRT Button, LCD, Console, SELECT BACK, Right encoder X-Guide View Share Menu
• Steering Wheel Profile: Right Console Interface Headphone Jack POWER K-DRIVE Button, RSB Button, Left Console Interface Pedal Port USB Port
• Console: Fail Switch, B1B2 B3 B4 Button, DC Power Port STARTFFB D1D2D3 T1T2T3T4 LSB Button C-C USB Port
• Pedal: Clutch, Brake, Accelerator, C-C USB ZPort

Product Usage Instruction

Connect

1. Insert the dedicated power adapter (24V/5A) into the steering wheel DC power socket interface.
2. Connect the main USB line to the USB port marked XONE/PC on the steering wheel and connect the other end to the PC or XBOX ONE host.
3. Connect the console to the side USB port using the dedicated USB C TO C cable.
4. Connect the pedal to any of the ports marked with EXPANSION PORTS below the front using the dedicated USB C TO C cable.
5. Press the POWER key to start up. The LED of the face disk becomes longer and brighter. The LCD screen turns on, and the steering wheel automatically turns and returns to the center, indicating successful power on.

PC/XBOX Mode Switching

1. Turn on the XBOX console and connect the USB cable to the steering wheel.
2. If the LCD displays PC mode, switch to XBOX mode by turning E2 on the right side of the steering wheel clockwise or counterclockwise and pressing SELECT Key.

FAQ:
Q: How do I know if the steering wheel is in PC or XBOX mode?
A: The LCD display on the steering wheel indicates the current mode. If it shows PC mode, follow the instructions to switch to XBOX mode for XBOX platform usage.

specification

summarize

The direct-drive steering wheel will consist of a panel, base and console, with HALL tripod pedals (hydraulic brakes), headphones and microphone functions. Face plate and console can be disassembled and assembled by DIY. The LCD display system and further Settings and enhancements are available. Display key product performance data on the display and allow deep customer configuration of the display content. The rest of the display will be implemented as input buttons, which can be customized using text, symbols, and colors for a more intuitive and fresh fashion button.

functional characteristics：

1. Platform: PC (D-input)& XBOX ONE.
2. Support system: Microsoft Windows8/10/11, XBOX ONE platform (Microsoft license), both platforms need to be connected Display selection mode on LCD screen.
3. The left and right picks are designed with Hall chip contactless switch, which has a longer service life.
4. The base and the console are provided with an emergency stop switch, which is convenient to press and stop in emergency.
5. The is equipped with HALL three pedals, where the brake uses the pressure sensor hydraulic effect function, which is closer to the real car when used The experience.
6. Has 2 axes, 1 POV and 12 separate motion control keys and a dedicated share key for the XONE ONE host.
7. With 2 high-precision encoders and 2 reversible rotary switches, you can quickly adjust the content on the LCD screen.
8. Front with color LCD screen (resolution: 480* 854,5 inches), the content can be set.
9. The relevant parameters of the steering wheel (such as key mapping, motor force, sensitivity, etc.) can be adjusted and set through the dedicated APP.
10. High performance AC synchronous three-phase servo motor, rated power 33.3W, maximum torque up to 6N.m.
11. 3.5mm audio stereo headphone jack for external earphones.
12. The base has a high friction non-slip foot pad at the bottom, and also has 2 metal fixing clips to make the use of tables and countertops more stable.
13. Power supply with 24VDC/5A high power adapter.
14. Local interface: 1: Main interface: XBOX/PC. 2: EXPANSION PORTS: EXPANSION PORTS 1 and 2 (can be connected to pedals Boards and consoles and other accessories).
15. Working current: when the motor is not rotating, the current is less than 200mA, and the maximum current is up to 6A when the motor is rotating.
16. This machine supports Bluetooth wireless mobile APP game programming configuration, and Firmware upgrade.

product diagram

wheel front

Steering wheel profile

Pedal

Connect：

1.  Insert the dedicated power adapter (24V/5A) into the steering wheel DC power socket interface, and the panel LED flashes.
2. Connect the main USB line to the USB port marked XONE/PC on the steering wheel, and connect the other end to the PC or XONE ONE host.
3. Connect the console TO the side USB port using the dedicated USB C TO C cable.
4. Connect the pedal TO any of the PORTS marked with EXPANSION PORTS below the front using the dedicated USB C TO C cable.
5. Press the POWER key on the lower right side once, or press the POWER key on the  console to start up, then the LED of the face disk becomes longer and brighter The LCD screen is also turned on, and the steering wheel will automatically turn and return to the center, indicating that the power has been successfully turned on.
6. You can perform related operations at this time.

PC/XBOX Mode switching：

1. Turn on the XBOX console and connect the USB cable to the steering wheel。

2. The LCD display status on the steering wheel, if it is in the XBOX state, it can be operated directly on the XONE platform。

3. If the LCD is displayed in PC state, as shown below, you need to switch to XBOX mode to use it。 

4. Turn the encoder E2 on the right side of the steering wheel clockwise or counterclockwise to move to XBOX mode and press SELECT Key select, will enter the XBOX mode。
   If the LCD is displayed in the following screen 1, you need to rotate the encoder E2 to the right to enter the mode debugging interface, as shown in the following figure2。

5. In Figure 2 interface, press the SELECT key to select, then enter the mode selection interface, as shown in the following figure, then follow the above directions The law can be entered into the corresponding mode。

6. In the state in Figure 2, you can rotate encoder E2 left or right, press the SELECT key to select entry, for each phase The function should be set, after setting, you can press the BACK key to exit and save。

7. Press the XBOX LOGO key to actively wake up the XBOX console。

Bluetooth application：

1. After power-on, switch to Bluetooth mode through rotary encoder E2, open the APP on the mobile phone, connect through Bluetooth, in Operation on the APP, can map each key function。

According to the use of the table：

1. The console can be attached to the right or left side of the steering wheel。

ATTENTION

1. Avoid strong vibration, do not disassemble, modify, repair.
2. Avoid storage in damp, high temperature, fume and other places.
3. Avoid water or other liquids entering the steering wheel, which may affect the steering wheel function.
4. Children should use this product under adult supervision.
5. If you have any quality problems or suggestions, please contact the seller or after-sales personnel.

Attention
Type-c output port is only used for data transmission,not for output on-load.

RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:
  The product is a low power device and its output power is lower than FCC SAR exemption level.

• IMPORTANT NOTE: In the event that this condition cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.

End Product Labeling

• The final end product must be labeled in a visible area with the following: “Contains FCC ID: XGB-231028WH”. The grantee’s FCC ID can be used only when all FCC compliance requirements are met.
• Manual Information To the End User
• The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.

Industry Canada statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation ofthe device.

• This Class B digital apparatus complies with Canadian ICES-003.
• This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios.
• The County Code Selection feature is disabled for products marketed in the US/ Canada.

Attention：
To avoid risk of fire, please just connect the product to an power supply of which output capability is less than 15W.

Portable device:

Radiation Exposure Statement: The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended  operation as described in this manual.
The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

UKCA Conformity:
Radio Equipment Regulations 2017 (S.I. 2017/1206)
Operating frequency range:2402-2480MHz
max power:-0.99dBm

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>