XINVO E18111 Wireless Charger User Manual
- July 8, 2024
- Xinvo
Table of Contents
XINVO E18111 Wireless Charger
Product Information
Specifications
- Model: E18111
- Origin: Shenzhen, China
- FCC ID: 2ARZK-E18111
Product Usage Instructions
If your device requires servicing, it is recommended to visit an authorized service center for assistance. To power off the device completely, ensure to disconnect the power plug from the wall socket.
It is important to keep the power plug easily accessible at all times for safety and maintenance purposes.
FAQ
-
Q: Where can I get my device serviced?
- A: For servicing, please visit our authorized service center or contact our customer service at customerservice@teambrandit.com or 877-567-9177.
Wireless Charger User Manual
Thanks for choosing us!
This is a wireless charger that allows you enjoy the fun of digital products
easily. Please kindly read the user manual before using and keep it for future
reference.
Connect to Power Adapter
- Connect the power adapter to socket.
- Connect adapter to the USB 2.0 interface, the other USB-C to the wireless charger.
- Stand by state : LED light is not on.
- Turn on: LED light show on 2 seconds then off.
- Charging : LED light show on
- FOD (Foreign Object Detection) : LED light twinkling once for a second until foreign objects is taken away.
- Full charging: Green LED Show on (suitable for some models)
- Includes: Wireless charger, charging cable, user’s manual
- AC adapter is excluded, please buy separately, or use the mobile phone original adapter if needed.
Specifications
- Input : DC 9V, 1.67A, DC 5V,2A
- Charging Efficiency :> 80%
- Charging Distance: 3-1 0MM, Frequency: 110-205KHz
- Wireless charging power : 15W/1 0W/7.5W/5W compatible
Safety information
- To prevent injury to yourself and others or damage to your device, please read the safety information carefully.
- Do not use if device is overheated. Wait until device temperature returns to room temperature
- Prolonged exposure of your skin to an overheated device may cause low grade burn symptoms, such as red spots and pigmentation.
- Do not store your device near or in heaters, microwaves, hot cooking equipment, or high pressure containers. Your device may overheat and cause a fire.
- Do not drop or cause an impact to the charger or the device. Store your device only on flat surfaces.
- If your device falls, it may be damaged. Do not bite or suck the device. Doing so may damage the device or cause an explosion.
- If children use the device, make sure that they use the device properly.
- Keep your device dry. Humidity and liquids may damage the parts or electronic circuits in your device.
- If your device is wet, dry the device with a towel and take it to a service center.
- Do not disassemble, modify, or repair your device.
- Your device may malfunction, and your risk of electric shock is increased.
- Any changes or modifications to your device can void your manufacturer’s warranty.
- Do not place too close to magnetic stripe or chip card to avoid magnetic failure.
- Please keep the distance at least 20cm between implantable medical devices and the wireless charger to avoid potential interference with the medical device. Using temperature remains 0-50°C.
If device needs servicing, take your device to service center. To turn this
apparatus off completely, you must pull the power plug out of the wall socket.
Consequently, the power plug must be always easily and readily accessible.
FCC Statement
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be
co‐located for operating in conjunction with any other antenna or transmitter.
Model: E18111
Made in Shenzhen, China
FCC ID : 2ARZK-E18111
- The Brand it Agency
- 1175 19th Street Vero Beach, FL 32960
- customerservice@teambrandit.com and/or 877-567-9177
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>