Shenzhen V960 Camera User Manual

: July 26, 2024
: Shenzhen

Table of Contents

Arsalan post complete

Shenzhen V960 Camera

Arsalan post complete

A: Device Description

B: How to work?

Step 1 : Install ‘ v960’ app . Two ways to download APP

scan the QR code.
download the “V960” application in the APP Store (iphone) or google play (android phone)

Step 2 : power on device

Connect to 5V power supply, the blue LED lights up
Press and hold the reset button for 3 seconds until The blue LED flashes.

Step 3： Add device

open the “V960” APP
Click “Add New Device”.

Step 4 : Set device name & connect wifi

Named your device,for example : living room,dining room.
select wifi and enter password.
press ”connect” button and the device will connect to the network automatically.
At this point, the device can work normally.

C: Attention

This device should be kept away from fire, water sources and other dangerous sources.
To better use this device, please avoid the front and side of the lens close to the glass, white wall and other reflective objects, in order to avoid the picture is bright near and dark in.
Please ensure that this product is installed within the range of Wi-Fi signal coverage.
please note that this device only supports 2.4G WiFi signals, not 5G WiFi signals.
This device only supports FAT32 format memory cards, and may not recognize memory cards with other formats.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Statement

To maintain compliance with FCC’s RF Exposure guidelines,This equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.