Pyle PDWRBT56WT Bluetooth Indoor Outdoor Speakers User Manual
- June 3, 2024
- Pyle
Table of Contents
Pyle PDWRBT56WT Bluetooth Indoor Outdoor Speakers
WIRELESS BT CONNECTION DIAGRAM
- As shown in diagram, will be the _rst two speakers docking, red lead to the positive, black lead to the negative.
- As shown in diagram 1, A port is 3.5mm AUX IN, B port is DC12V, the connection is complete.
WIRELESS BT CONNECTIVITY
- Built-in Wireless BT Streaming Receiver
- Simple & Hassle-Free Connection Works with All of Today’s Latest Devices (Smartphone, Tablet, Laptop, Computer, etc.)
- Wireless BT Version: 0
- Wireless BT Network Name: ‘Pyle’
- Wireless BT Network Password: ‘0000’ (4 Zeroes)
- Wireless Range: 30’+ ft.
SUPPORT
- Questions? Issues?
- We are here to Help!
- Phone: (1) 718-535-1800
- Email:support@pyleusa.com
TECHNICAL SPECS
California Prop 65 Warning
Warning: This product contains Nickel carbonate which is known to the
state of California to cause cancer birth defects and other reproductive harm.
Do not ingest.
For More Info go to:
www.P65warnings.ca.gov
FAQs
Can indoor speakers be used outdoors?****
Although indoor speakers can be used outside, they are more susceptible to weather damage than equipment built for outdoor usage. Make sure to bring indoor speakers inside when not in use if you use them outside.
What is the difference between an outdoor speaker and an indoor speaker?****
An indoor speaker and an outdoor speaker differ mostly in their designs. Outdoor systems must endure, withstanding weather conditions like rain, hail, snow, and errant kickballs. That implies that the materials employed to build them must be robust.
How far apart can Pyle PDWRBT56WT outdoor speakers be?****
In general, keep your speakers as far apart as you can, but no closer than 20 feet. Attempt to direct each speaker toward a hub where the best sound will converge. Two speakers should be sufficient in a room between 200 and 400 square feet.
Is there a difference between indoor and outdoor speaker wire?****
Compared to the wire you use to connect your indoor speakers, the wire connecting outdoor speakers to your amp will be subjected to much harsher environmental conditions and likely travel a greater distance. This calls for a little more caution when selecting the best outdoor speaker cable.
How do you protect Pyle PDWRBT56WT outdoor speakers?****
Keep them away from water and the sun. In inclement weather, when it is impractical to bring them inside, cover them. inspect mounting hardware frequently. Regularly inspect the wiring. Always keep your speakers clean.
How long should Pyle PDWRBT56WT outdoor speakers last?****
If they are properly cared for and maintained, outdoor speakers can typically last up to ten years. The temperature and humidity of the environment, sunlight exposure, proximity to water (including swimming pools), owner maintenance, and the calibre of the wiring, mounting hardware, and weatherproof seals all have an impact on how long outdoor speakers last.
Do Pyle PDWRBT56WT outdoor speakers need power?****
The majority of outdoor speakers are passive devices, which means they will require power because they lack built-in amplification.
Do Pyle PDWRBT56WT outdoor speakers need to be covered?****
They will need some protection because many outdoor speakers are weather- resistant rather than waterproof.
Can Pyle PDWRBT56WT outdoor speakers get wet?****
Although they are designed expressly to withstand the elements, weatherproof speakers are only water resistant, not waterproof. Weatherproof speakers should be fine when exposed to moisture, steam, rain, or sprinklers. Though keeping them protected will make them last longer.
How do you clean Pyle PDWRBT56WT outdoor speakers?****
Cleaning the speaker’s exterior on a regular basis is a good idea. The exterior may usually be kept clean with just a brush, but if you run across any really stubborn stains, it’s acceptable to use a little water and light soap. Avoid using harsh cleaners and chemicals since they could harm the coating of your speakers.
Do speakers require power?****
If loudspeakers feature built-in wireless receivers, active transducer elements, or amplifiers, they need power. Electricity for speakers and monitors normally comes from wall outlets (the power mains), but some use batteries or specialized amplifiers.
Do these speakers require an amp?****
No, they connect to 110 power before being connected by speaker cable.
Do speakers need to be charged?****
The majority of speakers won’t be completely wireless and will require a power source to function. Even totally portable systems occasionally need to be recharged. Wired speakers are the greatest option if you want the highest audio quality.
Do both speakers need dc adapters?****
Only the active speaker needs the adaptor.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>