QAZQA QL7001287 Jerri Wood CCT Fan Instruction Manual

: July 27, 2024
: QAZQA

Table of Contents

QAZQA QL7001287 Jerri Wood CCT Fan
Specifications
Product Usage Instructions
Safety instruction
Replaceable LED by a professional
RESOLVING PROBLEMS
Dimensions
Package Content
Required Tools
Installation
Button Functions
SAFETY INSTRUCTION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

QAZQA QL7001287 Jerri Wood CCT Fan

Specifications

Model: incl.LED QL7001287
Luminous Flux: 1560lm/1770lm/1600lm
Energy Efficiency Class: F
Voltage: AC (Alternating Current)
Frequency: Hz
Power Consumption: V (Voltage in Volt) / W (Intensity of current in watts)
Usage: Exclusive use in enclosed spaces
Installation: Remote control for speed adjustment and direction control

Product Usage Instructions

Installation

To install the fan, follow the instructions provided in the INSTALLATION section of the manual. Ensure proper wiring and grounding according to safety regulations.

Cable Information

Refer to the CABLE INFORMATION section for details on cable connection methods to ensure safe and proper installation.

Speed and Direction Control

Use the remote control to adjust the fan speed by pressing the corresponding buttons for different speed levels. You can also control the direction of the fan rotation for optimal comfort based on temperature conditions.

LED Replacement

If the LED needs replacement, it should be done by a professional to ensure proper installation and safety.

Maintenance

Check and secure all connections and attachments of the fan components twice a year.
Clean the fan regularly using a gentle brush or cloth. Avoid using water to prevent damage to the motor or wood.
Avoid lubricating the fan as it has a permanent lubrication system in place.

This product contains a light source of energy efficiency class F.

Replaceable (LED only) light source by a professional.

Replaceable control gear by a professional.

Safety instruction

READ THESE INSTRUCTIONS CAREFULLY AND KEEP THEM FOR FUTURE CONSULTATION.

WARNING: TO REDUCE THE POSSIBLE RISK OF FIRE, ELECTRICAL DISCHARGES OR PERSONAL INJURY, TAKE THE FOLLOWING INTO ACCOUNT:

Proceed with care. Read the instructions in full before starting the installation.
WARNING! This fan can only be used with a bipolar switch with a contact opening of 3mm.
The installation process must only be carried out by an authorized electrician.
The installation height, i.e. the distance between the blades
Make sure there are no obstacles within the area of rotation.
Make sure the fan is securely attached to the ceiling.
WARNING! Do not use a switch with a voltage regulator to control the speed of the fan.
WARNING! To avoid damage, make sure that the blades are not bent over and that there are no foreign objects within the area of rotation.
ARNING! If the fan is installed close to the ceiling, the ceiling may not be lowered using rails in accordance with European safety regulations. This could cause serious injuries. lf you have any doubts in relation to these essential safety requirements, consult local by-laws.
Keep all electrical appliances away from children or impaired persons. Do not allow them to handle these appliances without supervision.
Suitable for use in enclosed spaces.
Make sure that the appliance is not connected to the power supply before taking apart the components of the lamp. Connect to the power supply only after the installation has been completed.
Do not remove the shade from the lamp if the light bulb in on.
Change the light bulb only after the lamp has cooled down and when the appliance is not connected to the power supply.
When you switch on the appliance, make sure that the lampshade is secure.
IP20 The fan is designed for use in interior spaces. lt is not suitable for installation in a bathroom or habitually humid areas. Please make sure that the lamp never comes into contact with water.
You must make sure that children do not play with this lamp.
Always switch off the appliance and disconnect it from the power supply before installation, changing the light bulb, maintenance and cleaning.
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with appliances. Cleaning and user maintenance shall not be made by children without supervision.
The means for disconnection from the supply mains having a contact separation in all poles that provides full disconnection the wiring rules.
install the fan, thanks refer to the section “INSTALLATION”.
Regarding the instructions for the method of fixing and how to install the fan, thanks to refer to the section “INSTALLATION”.
Regarding the method of the cable connection, thanks to refer to the section “CABLE INFORMATION”
Description of the symbol:
The light source contained in the luminaire is non-user replaceable. It shall only be replaced by the manufacturer or his service agent or similar qualified person. The shade of the Light kit assembly MUST NOT be removed during cleaning, maintenance or any other circumstances.

You will find all the symbols related to his lamp on both the product labed and the box in which it came.
Insulation class 1 . This fan must be connected with its ground wire(green and yellow cable) to the earthing conductor.
Insulation clas Il . This fan is double insulation and it must not be connected to the earth connection.

Exclusive use in enclosed spaces.

Level of protection against intrusion. You can find the corresponding protection level on the label of the lamp.

Remote control

Connect to the power supply and check the functioning of the fan. A series of pulses controls the speed of the fan, as follows : Press 1 – lowest; press 2 -low; press 3 -Medium speed; press 4 -high; press 5-very high; press 6-highest. The speed adjustments tope temperature will depend on factor such as the size of the room, its height, the number of fans available, etc.
Using the , you can control the direction of the fan, forward or backward.
Hot temperatures – (forward) The fan turns anti-clockwise. The downward air current creates a cooling effect, as shown in Figure A.
This enables you to set the air conditioning to a higher temperature without compromising on comfort.
Low temperatures – (backward) The fan turns clockwise. The upward air current causes the warm air in the B.
This enable you to set the heating to a lower temperature without compromising on comfort. (Before using your fan in this position, consult point 10 of the safety instructions).

Replaceable LED by a professional

Maintenance

Due to the normal movement of the fan, it is possible that some connections may come lose. Check the support connections, the supports and attachment of the blades twice a year. Make sure they are securely attached.
Clean the fan regularly to keep it in perfect condition for many years. Do not use water for this. lt could damage the motor or the wood, or even cause an electrical discharge.
Use only a gentle brush or smooth cloth to avoid scratches on the surface. The surface has been varnished to minimize the effects of discoloration and the passage of time.
lt is not necessary to lubricate the fan. The motor has a permanent lubrication system.

RESOLVING PROBLEMS

If there are problems when you switch on your new ceiling fan, it is possible that the assembly, installation or connection of the cabling have not been carried out correctly.

Sometimes, these installation errors are confused with failures of the appliance. lf problem arise, please consult the table below.

Meaning of the symbol with a crossed-out waste bin:
Do not throw electrical appliances out with the household waste. Dispose of them at specified collection points.

For information on the available waste collection system, contact your local district council.

If electrical appliances are disposed of in waste dumps together with other waste, it is possible that certain hazardous substances could contaminate underground water and affect the food chain, which could cause damage to health and well – being. If you replace your electrical appliances with new ones, the seller is obliged by law to collect the old appliances free of charge for correct disposal.

When the time comes to eliminate this product, please consider the environmental impact and take it to recognised recycling facility instead of disposing it with general household waste. Take the equipment to a waste disposal site. Plastic and metal parts that are used in the construction of this appliance can be separated into pure grade which allow recycling. Ask to your service centre for details. Every one of us can participate in the environmental protection.

Warnings

Do not poke any objects or fingers through the protective screens
Be a cartel with long hair. These calls the sucked-in device airflow, keep sufficient distance.

Dimensions

Package Content

Required Tools

Installation

Button Functions

Type number remote: RF
RF frequency range:433.92MHz,
Transmit Power: 13dBm.
Coverage area: within 15m in open area
Simplified Declaration of Conformity:
Hereby, FittinQ BV declares that the radio equipment type [designation of the type of radio equipment] is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address: www.qazqa.nl

Please contact the store which you bought the product for after sale services if question

SAFETY INSTRUCTION

Please study the instruction manual and the below information carefully before installing or using this product. Please keep this user manual for further reference

The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
Exterior lighting must not be installed during rain.
Take account of the minimal separation distance from other objects and the room required around the fitting.
If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components.
Take account of all available technical information.
Meaning of symbols:
This luminaire cannot be disposed together with normal domestic waste in a standard rubbish can, but you have to bring it to a staging area for electrical waste.
Take note of the symbols when connecting wires: