Robbe 1100 K-V Ro Power Torque Instructions

: July 24, 2024
: robbe

Table of Contents

Robbe 1100 K-V Ro Power Torque
Product Information
Product Usage Instructions
PREFACE
SAFETY INFORMATION
WARRANTY
CONFORMITY
DISPOSAL
DISCLAIMER
Features
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Robbe 1100 K-V Ro Power Torque

Product Information

Specifications

Brand: Robbe Modellsport
Product: Ro-Power Torque motors
Compliance: CE directives
Origin: Made in China
Warranty: Refer to the user manual

Product Usage Instructions

Safety Information
Ensure to follow all safety instructions provided in the user manual to prevent accidents and injuries during operation.
Disposal
When disposing of the product, ensure to separate small electrical and electronic devices from household refuse. Dispose of the device at your local municipal collection point or recycling center.
Disclaimer
Read and understand the disclaimer provided by Robbe Modellsport before operating the product.
Warranty Information
Refer to the warranty section in the user manual for details on warranty coverage and terms.

FAQ

Q: Where can I find technical data for different motors?
A: You can find technical data for various motors on the Robbe Modellsport website under the respective product categories.
Q: How can I contact customer service?
A: You can reach customer service by emailing service@robbe.com or calling +43(0)7582-81313-0.

PREFACE

The Robbe Ro-Power Torque motors are precisely manufactured brushless motors for RC applications. Only selected, high-quality materials and semi-finished products are used. Manufacturing is carried out to precise specifications and standards to provide you with a durable, powerful drive for your model.
We recommend that you use Robbe Ro-Control regulators (esc´s) to achieve the highest possible level of efficiency. However, it is also possible to use the motors with controllers from other manufacturers. When adjusting the correct propeller you should monitor the current as well as the temperature. Always ensure sufficient cooling.
The propeller and motor mounting must be checked conscientiously and regularly for tightness. The drive recommendations are only guide values and may vary in practice depending on the model and model type.
We wish you many trouble-free operating hours with our Ro-Po-were Torque motors!

SAFETY INFORMATION

These motors are brushless
Be sure to read the safety instructions carefully before operating your model.
Always follow the procedures and settings recommended in the instructions.
If you are using remote-controlled model aircraft, helicopters, cars, or ships for the first time, we recommend that you ask an experienced model pilot for help.
Remote-controlled models and their accessories are not toys in the usual sense and may only be used and operated by young people under 14 years of age under the supervision of adults.
Their construction and operation require technical understanding, careful craftsmanship, and safety-conscious behavior.
Mistakes or negligence during construction, flying, or driving can result in considerable damage to property or personal injury.
Since the manufacturer and seller do not influence the proper construction/assembly and operation of the models and their accessories, these risks are expressly pointed out and any liability is excluded.
Propellers on aircraft and all moving parts in general pose a constant risk of injury. Avoid touching such parts at all costs.
Note that motors and controllers can reach high temperatures during operation. Avoid touching such parts at all costs.
Never stay in the danger area of rotating parts with electric motors with connected drive batteries.
Only the components and accessories recommended by us may be used.
Check the engine mounting bolts in the fuselage regularly for tightness.
Never exceed the maximum permissible speed of the propellers used or of the motor!
This can lead to serious injuries, e.g. from flying parts!
The motors may only be used for model-making usual applications.
Never use damaged motors, propellers, spinners, etc.!
Only suitable speed controllers may be used in connection with model accumulators.
(no power supplies, or other voltage sources such as 230V AC alternate current)
Make sure that the fixing screws used do not protrude into the motor housing. Otherwise, the motor can be permanently damaged!
Most motors are designed for front or rear mounting. Make sure that all screws are tight and check all screw connections regularly.
Make sure that the motor does not overheat due to sufficient cooling. Temperatures above 60°C can damage the motor.
Never operate the motor without a load, as this may damage the motor due to excessive speed.

WARRANTY

Our articles are equipped with the legally required 24-month warranty. Should you wish to assert a justified warranty claim, always contact your dealer, who is responsible for the warranty and the processing. During this time, any functional defects that may occur, as well as manufacturing or other problems, will be rectified. Material defects are corrected by us free of charge. Further claims, e.g. for consequential damages, are excluded. The transport to us must be free, the return transport to you is also free. Freight collection shipments cannot be accepted. We cannot accept liability for transport damage and loss of your consignment. We recommend appropriate insurance.

To process your warranty claims, the following requirements must be met:

Attach the proof of purchase (receipt) to your shipment.
The units have been operated under the operating instructions.
Only recommended power sources and original Robbe accessories have been used.
There is no moisture damage, external interference, reverse polarity, overloading or mechanical damage.
Attach relevant information for finding the fault or defect.

CONFORMITY

Robbe Modellsport hereby declares that this device complies with the essential requirements and other relevant regulations of the corresponding CE directives. The original declaration of conformity can be found on the Internet at www.robbe.com, in the detailed product view of the respective device description, or on request. This product can be operated in all EU countries.

DISPOSAL

This symbol means that small electrical and electronic devices must be disposed of at the end of their useful life, separated from the household refuse. Dispose of the device at your local municipal collection point or recycling center. This applies to all countries of the European Union and other European countries with a separate collection system.

DISCLAIMER

Robbe Modellsport cannot monitor compliance with the assembly and operating instructions or the conditions and methods for installation, operation, use, and maintenance of the model components. Therefore, we accept no liability for losses, damage, or costs arising from or in any way connected with incorrect use and operation. To the extent permitted by law, the obligation to pay damages, irrespective of the legal grounds, shall be limited directly to the invoice value of the claims arising from the event causing the damage.

Features

NOTE:
Our large selection of different motors and their technical data, currently calculated measured values of the propellers, controllers, and so on, can always be found on our website: https://www.robbe.com/en/Airplanes/Aircraft- Engines/Motors/.

DISTRIBUTOR

Copyright 2020
Robbe Modellsport 2020 Copy and reprint only with our permission.

„Robbe “ is a registered Trademark. Errors, misprints, and technical changes are reserved. www.robbe.com.

Made in China.