PANCONTROL PAN MV-1000A Voltage Tester User Manual

: June 16, 2024
: PANCONTROL

Table of Contents

PANCONTROL PAN MV-1000A Voltage Tester
Product Information
Product Usage Instructions
Safety Instructions
Operating Instructions
Maintenance
Cleaning
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PANCONTROL PAN MV-1000A Voltage Tester

Product Information

Product Name: PAN MV-1000A Voltage Tester
Manual: https://pancontrol.at/downloads/19AX

Specifications

Scope of Delivery: Please check the package contents for transport damage and completeness after unpacking.
Safety Instructions: Follow all safety and operating instructions provided in the manual for safe use of the device.
Operating Instructions: Switch to a higher range if the voltage exceeds the used range. Detailed information on operation and technical data can be found under the link or QR code on the first page of the manual.
Maintenance: Only authorized service technicians should repair the instrument.
Cleaning: Clean the instrument using a humid cloth and mild household detergent. Ensure that the instrument is switched off and disconnected from external voltage supply and other instruments before cleaning. Do not use acid detergents or solvents.
Guarantee and Spare Parts: The device is covered by a statutory warranty of 2 years from the date of purchase. For complaint handling, visit www.pancontrol.at/complaints. For spare part requirements, queries, or problems, contact your vendor or KRYSTUFEK.at.

Product Usage Instructions

Scope of Delivery
After unpacking, please check the package contents for any transport damage and ensure that all items are included.
Safety Instructions
For the safe use of the PAN MV-1000A Voltage Tester, it is important to follow all safety and operating instructions provided in the manual.
Operating Instructions
If the voltage exceeds the range used by the tester, switch to a higher range if available. Detailed information on operation and technical data can be found under the link or QR code on the first page of the manual. If you prefer a printed version of the manual, you can request it.
Maintenance
Only authorized service technicians should perform repairs on the PAN MV-1000A Voltage Tester.
Cleaning
To clean the instrument after daily usage, use a humid cloth and a mild household detergent. Before cleaning, ensure that the instrument is switched off and disconnected from external voltage supply and any other instruments connected. Never use acid detergents or solvents for cleaning.

FAQ

Q: How long is the warranty for PAN MV-1000A Voltage Tester?
A: The device is covered by a statutory warranty of 2 years from the date of purchase.
Q: Where can I find information on complaint handling?
A: For complaint handling, visit www.pancontrol.at/complaints.
Q: Who should I contact for spare part requirements or queries?
A: For spare part requirements, queries, or problems, please contact your vendor or KRYSTUFEK.at.

MANUAL
https://pancontrol.at/downloads/19AX

PAN MV-1000A

Voltage Tester

Scope of delivery
After unpacking please check the package contents for transport damage and completeness.
- Measurement device with Handset
- Probes 4mm (for screwing on)
- Probe cover
- Protective cover
- Operating manual

Safety Instructions

To ensure the safe use of the device, please follow all the safety and operating instructions given in this manual.

Before using the device, make sure that test leads and the device are in good condition and the device is working properly (e.g. by connecting to known voltage sources).
The device may not be used if the housing or the test leads are damaged, if one or more functions are not working, if functions are not displayed, or if you suspect that something is wrong.
If the safety of the user cannot be guaranteed, the device may not be operated and secured against use.
Never connect the device to voltage or current sources that exceed the specified maximum values.
Never touch conductive parts or bare wires.
Do not use the device in any higher category than allowed.
While using this device, hold the test leads only behind the finger guards – do not touch the probes.
Never ground yourself while making electrical measurements. Do not touch any exposed metal pipes, fittings etc., which could have a ground potential. Ensure that your body is isolated by using dry clothes, rubber shoes, rubber mats or other approved insulation materials.
Never connect the device to voltage or current sources that exceed the specified maximum values.
Never allow the appliance to be plugged into an outlet without holding it, otherwise it may be damaged.
If the battery symbol appears in the display, replace the battery immediately.
Always switch off the appliance before opening the device to exchange the battery or the fuse.
Never use the device with the rear cover removed or with the battery and fuse compartment open!
Do not use the device outdoors, in humid surroundings or in environments that are subjected to extreme temperature fluctuations.
Never use the device in an explosionprone environment.
Do not store the device in places which are exposed to direct sunlight.
Remove the battery if the device is not used for a long time.
If changes or modifications are made to the device, the operational safety is no longer guaranteed and the warranty becomes void.

Operating Instructions

Always switch OFF the device when it is not in use.
Be aware of the Safety Instructions!
If “OL” is displayed while measuring the value exceeds the used range. Switch to a higher range if available.
Detailed information on operation and technical data can be found under the link or QR code on the first page of this manual.
On request, we will send you the manual in printed form.

Maintenance

Only authorized service technicians may repair the instrument.

Cleaning

If the instrument is dirty after daily usage, it is advised to clean it by using a humid cloth and a mild household detergent. Prior to cleaning, ensure that instrument is switched off and disconnected from external voltage supply and any other instruments connected. Never use acid detergents or dissolvent for cleaning.
Guarantee and Spare Parts

This device is covered by the statutory warranty of 2 years after date of purchase (according to purchase receipt).
Further information on complaint handling can be found at:
- www.pancontrol.at/complaints
In case of spare part requirement or in case of queries or problems, please get in touch with your vendor or:
KRYSTUFEK.at
Changes as a result of technical development, as well as errors and printing errors reserved.
- Vienna, 07-2023

Dipl. Ing Ernst KRYSTUFEK GmbH & Co KG