Danfoss TWA-Z 1.2m Thermal Actuator Installation Guide
- July 24, 2024
- Danfoss
Table of Contents
Danfoss TWA-Z 1.2m Thermal Actuator
Specifications
- Model : TWA-Z
- Input Voltage : 24 V / 230 V
- Contact Type : NO (Normally Open) / NC (Normally Closed)
- Class : Class III transformer (SELV)
- Max. Current : 3 A pre-fuse
- IP Rating: IP 41
Product Usage Instructions
Installation:
- Ensure the power supply matches the input voltage requirements of the product (24 V or 230 V).
- Connect the appropriate wires based on the desired contact configuration (NO or NC).
- Ensure proper grounding to comply with safety regulations.
- Mount the device securely in a suitable location.
Operation:
- Apply power to the device within the specified voltage range.
- Observe the status of the contacts (open or closed) based on the application requirements.
- Monitor for any abnormal behavior or malfunctions during operation.
Maintenance:
- Regularly check for loose connections or signs of wear.
- Clean the device as needed to prevent dust accumulation.
- Replace any damaged components promptly to ensure proper functionality.
DIMENSION
Model : TWA-Z
- 24 V Class III transformer (SELV)
- 230 V Max. 3 A pre-fuse
- NO Normally Open
- NC Normally Closed
Disposal note
This symbol on the product indicates that it may not be disposed of as
household waste. It must be handed over to the applicable take-back scheme for
the recycling of electrical and electronic equipment.
- Dispose of the product through channels provided for this purpose.
- Comply with all local and currently applicable laws and regulations.
Danfoss A/S
- Climate Solutions
- danfoss.com
- +45 7488 2222
Any information, including, but not limited to information on the selection of product, its application or use, product design, weight, dimensions, capacity or any other technical data in product manuals, catalogues descriptions, advertisements, etc. and whether made available in writing, orally, electronically, online or via download, shall be considered informative and is only binding if and to the extent, explicit reference is made in a quotation or order confirmation. Danfoss cannot accept any responsibility for possible errors in catalogues, brochures, videos and other material. Danfoss reserves the right to alter its products without notice. This also applies to products ordered but not delivered provided that such alterations can be made without changes to form, fit or function of the product. All trademarks in this material are property of Danfoss A/S or Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All rights reserved.
FAQ
Q: What should I do with the product when no longer in use?
A: The product should not be disposed of as household waste. Please hand it
over to the applicable take-back scheme for recycling.
Q: Are there any hazardous substances in the product?
A: The product contains hazardous substances below the limit requirements as
indicated in the Hazardous Substances Table.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>