AIPAS-A2 Electric Bike Instruction Manual

AIPAS-A2 Electric Bike

Specifications

• Brand: HeyBike
• Model: Cityscape
• Type: Electric Bike
• Copyright: 2024 AIPAS. All Rights Reserved.

Product Overview
The HeyBike Cityscape is an electric bike designed for urban commuting and recreational use. It offers a convenient and eco-friendly way to travel short to medium distances.

Setting Up Your HeyBike Cityscape
Before assembly, please carefully read the instruction manual provided. Make sure to follow the step-by-step assembly instructions to set up your eBike correctly.

Specifications
The HeyBike Cityscape features a LCD display that provides essential information about your ride. The controls on the handlebars allow you to navigate through different functions effortlessly.

Usage Instructions

Battery Safety
Ensure the battery is properly installed and securely attached before riding. Follow the manufacturer’s guidelines for charging the battery to prolong its lifespan.

Charge Safety
Only use the charger provided with the HeyBike Cityscape to charge the battery. Avoid overcharging the battery and always charge it in a well- ventilated area.

Storing The Battery
When not in use, store the battery in a cool, dry place away from direct sunlight or extreme temperatures. Disconnect the battery from the eBike if storing for an extended period.

Troubleshooting
If you encounter any issues with your HeyBike Cityscape, refer to the troubleshooting section of the manual for common problems and solutions. Contact customer support if needed.

Maintenance
Regular maintenance is essential to keep your eBike in optimal condition. Follow the maintenance schedule outlined in the manual for tasks such as tire pressure checks, chain lubrication, and brake inspections.

FAQ

• Q: Where can I find the serial number of my HeyBike Cityscape?
  

  • A: The serial number is located on the head tube of your bicycle. Refer to page 09 of the manual for the exact location.

• Q: Can I use my HeyBike Cityscape for off-road riding?
  

  • A: No, the HeyBike Cityscape is intended for urban commuting and recreational use on paved roads. It is not suitable for off-road or mountain biking activities.

• Q: How do I activate my warranty for the HeyBike Cityscape?
  

  • A: Scan the QR code provided in the manual to activate your warranty and access more information. You can also contact HeyBike customer support for assistance.

AIPAS-A˜
ELECTRIC BIKE
INSTRUCTION MANUUSER MANUALAL

COPYRIGHT 2024 AIPAS.ALL RIGHTS RESERVED.

The manufacturer reserves the right to make changes to the product and manual at any time Visit www.Aipasbike.com to download the latest user manuals

AIPAS EBIKE
Please read the instruction manual carefully before setting up your eBike and riding. You should be familiar with the operation of your eBike, its features, capabilities, and limitations. To ensure a long, trouble-free life for your Aipas eBike, provide it with the proper care and maintenance as described in this manual. Of course, it is not practical or possible to warn you about all of the hazards associated with operating or maintaining your Aipas eBike. For this, you must use your own good judgment.

For any replacement parts and accessories, Please use Aipas eBikes-approved parts, as they have been specially designed for your bicycle and manufactured to meet Aipas eBikes’ demanding standards.

This manual should be considered a permanent part of your bicycle and should remain with the bicycle when it is sold.

Please contact us if you need any assistance please do not hesitate to reach out to us.

CONTACT INFORMATION

• Email: service@aipasbike.com
• Website:www.aipasbike.com
• Pre-sales Phone: 1(833)556-3566
• After-sales Phone: 1(833)532-5966

Active your warranty and get more info by scanning this QR code

@AipasEbike

Safety Messages
Please record your bicycle’s serial number in the space below. The serial number is located on the head tube of your bicycle. Refer to page 09 for the location of the serial number.

SERIAL NUMBER

Read Manual Before Riding

• Please read the manual before you take the ride on your new eBike and keep it for reference. This Owner’s Manual contains important safety, performance, and service information.
• Like any sport, bicycling involves the risk of injury and damage. By choosing to ride a bicycle, you assume the responsibility of that risk: you need to know and practice the rules of safe and responsible riding as well as proper use and maintenance. Proper use and maintenance of your bicycle reduces the risk of injury. If you have any questions or do not understand any aspect of using or maintaining your bike, take responsibility for your safety and consult with your local bicycle shop, or contact us for assistance.
• This manual is not intended as a comprehensive use, service, repair, or maintenance manual. Please see your local bicycle shop for all service, repairs, or maintenance. Your local bicycle shop may also be able to refer you to classes, clinics, or books on bicycle use, service, repair, and maintenance.
• Your Aipas eBike is classified as an EPAC (Electrically Power Assisted Cycle, otherwise known as a Pedelec), and is referred to in this manual as a bicycle unless otherwise noted.

Rider’s Responsibility Regarding Regulations
It is the rider’s responsibility to obey the regulations that apply to your Aipas eBike.
The regulations covering the use of your Aipas eBike vary by state and even municipality in certain locations. You must comply with the local regulations related to the minimum age of the rider, driver’s license, insurance, license plate, traffic, maximum speed regulations, and any other regulations. These regulations may change at any time.

Intended Use

• The intended use of your Aipas eBike is to be ridden by one rider at an appropriate time and place for general transportation or recreational use. Any other use is prohibited and may result in SERIOUS INJURY or DEATH.
• Your bicycle is NOT INTENDED for off-road or mountain bicycle use or any kind of jumping. Some of these bicycles have suspension features, but these features are designed only to add comfort, not off-road capabilities.
• Riders should be proficient cyclists (ages 16+), riding on paved surfaces where the tires are always on the ground, on roadways, or dedicated bicycle-only lanes where permitted by law (not on pedestrian-use shared lanes or sidewalks). Your bicycle should not be used to tow another bicycle. For trailer towing, consult this Owner’s Manual and the trailer owner’s manual for towing instructions and towing compatibility.

WARNING!

To prevent serious injury or death

• Read all safety warnings and all instructions.

• Always ride within your limits and the limits of your eBike.

• Bicycles are only for use by persons 16 years old and above.

• Riders must have the physical coordination, reaction, and mental capabilities to control a bicycle and manage traffic, in addition to managing road conditions and sudden situations with respect to the laws and instructions governing bicycle use. Persons with any mental or physical conditions that may make them susceptible to injury, impair their physical dexterity or mental capabilities to recognize, understand, and follow safety instructions —or understand the hazards inherent to its use — should not use or be permitted to use products inappropriate for their abilities.

• Never ride under the influence of drugs and/or alcohol.

• Consult a doctor before using the device if you have any medical condition or issue that affects your ability to safely perform physical activities, or if you:
  are or may be pregnant;

• have heart, respiratory, back, joint, or other orthopedic conditions;

• have high blood pressure;

• have difficulty with physical exercise;

• have been instructed to restrict physical activity.

• Always keep small parts away from children. Some eBike accessories may present a choking hazard to small children.

• Never modify your frame or bicycle in any way. Do not sand, drill, file, or remove parts from your bicycle. Do not install incompatible components or hardware.

• Always use proper lifting techniques to prevent injury. Your eBike may be significantly heavier than a bicycle without a battery pack and a motor.

• Take responsibility for your SAFETY. If you have any questions or do not understand any aspect of using or maintaining your bicycle, contact Aipas eBikes at service@aipasbike.com or call (833)532-5966

Helmets

• Always wear a helmet. Wearing a helmet properly may reduce the risk of a severe head injury. When riding, always wear a helmet that meets or exceeds the standards of the
• Consumer Product Safety Commission(CPSC). Check the manual that comes with your helmet.
• Ensure your helmet fits your head and is properly secured. If you attach a child’s seat to the bicycle, the child must wear a properly fitted helmet at all times.
• Read your helmet manual to make sure it is adjusted properly according to the fitting instructions provided by the helmet manufacturer.
• A proper-fitting helmet should be comfortable and should neither rock forward/backward nor side to side.

Pre-Ride safety Check

• Before each ride, inspect your eBike for damage. If damage is found, do not ride.
• Verify that the front and rear axles are secure.
• Verify that the handlebar and seat clamps are closed and tightened to the torque specified in the Manual.
• Verify that both the handlebar latch and frame latch are secure and fully closed.
• Check the tire pressure of both wheels.
• Pull the brake levers to ensure the brakes are working properly and adjust if necessary. NEVER exceed the maximum total weight limit of 330 lbs. (150 kg). The rear rack can hold a maximum of 75 lbs. (35 kg). As an example, if you have 40 lbs. (18 kg) of cargo, then the maximum weight of the rider would be 290 lbs. (131 kg)

Follow eBike Regulations On and Off the Road
Be aware of eBike regulations in your area. Generally, the regulations for the use of an Aipas bicycle are the same as those for a standard bicycle. However, there may be local differences such as where you can ride, minimum rider age, or required equipment and license and registration regulations. It is your responsibility to know the local regulations that apply to an electric bicycle and to obey them.

Ride at Your Own Risk and Use Common Sense

• Do not ride distracted. Always remain alert to all riding conditions. Using the Display or other technology (including your mobile phone or music player) could distract you from riding. Only adjust the Display when stationary and in a safe start-up position.
• Always keep both hands on the handlebar grips and the brake levers so they are within reach while riding.
• Never use headphones or a cell phone to talk or text when riding.
• Always ride defensively. Watch out for potential obstacles that could force you to swerve suddenly or lose control. Braking while steering may reduce your ability to control your bicycle.
• Look ahead and brake sooner. You may be moving faster on your eBike, and it may be heavier, compared to a bicycle, which means you may need to react and brake sooner when riding. Other road users may not expect you to be traveling at higher speeds. Riding faster may increase your risk of a crash.
• Stop pedaling well before approaching corners to avoid entering a corner too quickly. You should also pay particular attention to terrain conditions as you may approach obstacles faster than expected.

Riding in Wet Conditions

• Use caution when riding in wet conditions as it will take longer to brake and to stop. Your tires may slip when turning. The risk of a crash is dramatically increased in wet conditions.
• Your electric bicycle can withstand light rain and small splashes, but it is not designed to be subjected to inclement weather, extremely heavy showers, or submersion in water. The electric bike’s components have an IP rating of 65. Damage caused by water damage will not be covered by the warranty.

Riding at Night

• Riding at night comes with more risks than riding during the day due to decreased visibility; riders are encouraged to exercise increased caution in nighttime conditions.
• Turn lights ON for safety. For increased visibility, ensure that the front headlight and rear taillight are turned ON and adjusted so that other people on the road can see them clearly. Also check your front, rear, and wheel reflectors.
• Riders should wear reflective clothing at night. You may want to attach additional flashing lights to your clothing or helmet.

Icons and Stickers Guide

Califomia Proposition 65
WARNING! The wires of this product contain lead. Lead compounds and other chemicals known to the State of California cause cancer and birth defects or other reproductive harm. Wash hands after handling.

Signal Wonds

DANGER  Indicates a hazardous situation that, if not avoided, will result in death or serious injury.

Symbol

Alert Symbol. This symbol is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible serious injury or death.

On-Product Warning Labels
There are warning labels on your Aipas eBike for your protection. If a label is missing or is not legible, contact Aipas eBikes for a replacement.

WARNING To prevent SERIOUS INJURY or DEATH, BEFORE each ride

• Check STEM and FRAME latches are closed and secure
• Check TELESCOPING STEM and SEATPOST are inserted past the minimum insertion point inscribed on them. AND that the clamps on each are closed and tightened to the torque specified in the Owner’s Manual.

Stem label

WARNING
To prevent SERIOUS INJURY or DEATH

• ALWAYS wear a helmet.
• Know and follow local eBike rules & regulations.

Class 2 eBlke
Top speed: 20 mph
Class label 2

WARNING
To prevent SERIOUS INJURY or DEATH

• ALWAYS wear a helmet.
• Know and follow local eBike rules & regulations.

Class 3 eBlke
Top speed: 28 mph
Class 3 label

States that recognize three classes of eBikes require a label to be placed on the bicycle denoting the class of your Aipas eBike, the motor’s wattage rating, and the top speed of your Aipas eBike. Your bicycle comes as a Class 2 bicycle by default and has a label with this information posted under the carry-handle, near the seat post on the bicycle.

If you change your bicycle’s top speed, you must remove this label from the bicycle and replace it with a Class 3 label, detailing your Aipas eBike’s class, top pedal-assisted speed, and motor wattage. The Class 3 label is put in the small box.

Note Before Assembly

STARTING

• Your bicycle comes fully assembled. These instructions are intended to assist you in setting up and getting familiar with your new bicycle.
• After you make your first adjustments and inspect your bicycle, we recommend seeking professional help from a reputable and certified bicycle mechanic to check your bicycle before your first ride.
• Before removing the packaging material from your bicycle, remove all items from the box and make sure you have the following:

What’s in the box

If anything is missing or is damaged, contact Aipas eBikes immediately for assistance.
For a video about visit our YouTube page: Aipas eBikes

Serial Number
Serial number is located on the head tube of the bicycle as shown below. Please write it down inside the front cover of this manual. You may be asked for your bicycle’s serial number as part of a warranty request, You may also be asked to provide this number to law enforcement if your bicycle is stolen.

Product Overview

Setting Up Your Aipas eBike

NOTE: This manual is not intended to be an extensive reference book about service, maintenance, and/or repairs. You can find more information on our website: Aipasbike.com

Folding and Unfolding the Stem

1. Begin with the handlebar in the folded position, then pull the handlebar stem to its upright position.
2. Push the latch firmly until it locks in position, then pull on it to confirm it is secure and the handlebars cannot fold.

1. Pull up on the silver button labeled “open” to unlock the latch.
2. Pull the latch away from the stem while still holding the “open” button.
3. Fold the stem by lowering it to the side.

Unfolding and Folding the Frame

1. Unfold the bike frame, and stand near the frame where the battery is exposed. Grab the stem and rear end of the bike. Lift the bike slightly off the ground and swing to the closed position.
2. Push down the latch firmly until it locks into position. Pull on the latch to confirm that the latch has locked and that the frame cannot fold.

1. Unlock the bike frame and fold it by sliding the “open” switch to the right.
2. Pull the latch while still holding the switch to the “open” position.
3. Grab the frame near the battery and fold the bike

Unfolding and Folding the Pedal

1. Rotate each pedal until you hear a click indicating it is locked in place, signifying that the pedal is fully unfolded.
2. Hold the pedal and gently push it towards the bike frame.
3. Turn the pedal to snap it into place (perpendicular to the original pedal position), completing the folding process.

Adjust Stem Handlebar Height

WARNING!

• Tighten fasteners to the correct torque to prevent serious injury or death. Bolts that are too tight can cause the stem/seat post to stretch and deform. Bolts that are too loose can cause the stem/-seat post to move and wear. Either condition can lead to a sudden failure of the bolt and result in a crash. See Tightening Torque (p. 21).
• A stem/seat post that is positioned too high can damage the bike and cause you to lose control and crash. Select a height that is comfortable for you, but DO NOT extend past the safety line position. To adjust your stem/seat post, unlatch the clamp, move the handlebars to the desired height, and close the clamp. Re-tighten the stem/seat post clamp to the recommended torque (see Tightening Torque on p. 21).

Adjust Stem/Seat Post Height

WARNING!

• Loosen the lamp. The open and closed positions of the clamp are shown below (open position on left, closed position on right);
• Raise or lower the stem/seat post in the seat tube;
• Check if the seat/handlebar is straight and not tilted., and Re-tighten the seat post clamp to the recommended torque. See Tightening Torque(p. 21).

Adjust seat Position

WARNING!

Front and back adjustment : Loosen nuts on both sides of the seat. Make sure the clamp mechanism is clamping on the straight part of the seat rails and is not touching the curved part of the rails. Ensure that you are using the recommended torque on the clamping fastener(s). See Tightening Torque (p. 21).

Seat angle adjustment: Most people prefer a horizontal seat, but you may prefer the seat nose angled slightly up or down. Loosen the clamp bolt to allow any serrations on the clamp mechanism to disengage before changing the seat angle, and to fully re-engage the serrations before you tighten the clamp bolt to the recommended Tightening Torque (p. 21).
Remove The Battery

1. Open the bike to its fully folded state.
2. Insert the key into the lock and turn it to the “unlock” position.
3. Pull the latch and remove the battery

Charge The Battery

WARNING!

1. The battery can be charged either by removing it from the bike or while it is installed on the bike.
2. When charging the battery without removing it, first remove the dust plug located on the frame, then insert the charging connector into the charging port.
3. When charging the battery after removing it, directly insert the charging connector into the battery’s charging port.
4. Typically, the charger’s indicator light shows red while charging, green when fully charged, and also red when not charging.

You should fully charge the battery before your first ride.

Fire and explosion hazards. Never leave your battery battery unattended while charging to prevent serious injury or death.

Specifications

LCD Display Controls

• ODO: Total mileage of the eBikem.
• TRIP: Distance traveled during the current trip
• VOL: Current working voltage of the battery
• CUR: Current working current of the battery
• Walk: Walking mode;
• Cruise: Cruise control mode;
• TM : The total power-on time of the display
• Error: An error has occurred with the eBike (see error code table for details)

button to turn off.
Horn sound/stop| Press the button, and the           horn will sound. Release it, and the horn will stop.
Toggle Odometer, Trip A, Voltage, Current, Trip Timer (TM)| Press  button

Max Speed and Average Speed

| Press and hold the plus (+) button and  ) button simultaneously to toggle between the speed meter, max speed and average speed.

NOTE: The trip meter, as well as maximum and average speed will reset when the bicycle is powered OFF.

• To prevent serious injury or death, DO NOT change settings excluded from the table. Changing setting not listed in the following table may cause your bike to stop working properly. If you need the default setting values of settings not listed, contact Aipas eBikes. DO NOT ride your bicycle until the default settings have been restored.
• Do not tamper with your bicycle. Tampering is defined as removing or replacing any original equipment or modifying your bicycle in any way that may change its design and/or operation. Such changes may seriously impair the handling, stability, and other aspects of the bicycle, making it unsafe to ride. Tampering can void the warranty and render your bicycle non-com-pliant with the applicable laws and regulations. Aipas eBikes is not responsible for any direct, incidental, or consequential damages, including, without limitation, damages for personal injury, property damage, or economic losses due to tampering.
• To change display settings, hold the plus (+) and the minus (-) buttons simultaneously to enter into the Settings Menu. Press the button to toggle between each numbered setting. To adjust the value of each setting, click the plus (+) and the minus (-) buttons as needed.
• There are 21 settings (P01-P21). You should only change the settings listed below.

the brightest level is 3.
P02| Distance Units| 1| 0:KM; 1: MILE
P04| Sleep| 10| LCD Display sleep timer. The default setting will turn the display OFF after it has not been used for 10 minutes.
P06| Tire Size| 22| Used to compute speed and distance traveled.
P08| Speed Limit| 32| Range is 0-100.The value represents the maximum operating speed of your Aipas eBike in km/h. For example, a value of 25 indicates the maximum speed will not exceed 25 km/h. Drive speed is maintained at this set value. Any value above 45 will fully unlock the bike’s speed, which equates to up to 28mph. Margin of error: 3 km/h
P09| Throttle Zero Start| 0| 0: Throttle active from standstill.

1: Throttle active only wheal ready moving.

P10| Mode Toggle| 2| 0: PAS Active, Throttle Inactive 1: PAS Inactive, Throttle Active 2: Both PAS and Throttle Active
P11| PAS Sensitivity| 3| When set to higher numbers, it will take more crank rotations for the motor to turn ON. Lower numbers will take fewer crank rotations to turn the motor ON.
P12| PAS Strength| 1| When set to higher numbers, the motor will come on stronger. Lower numbers will be more gentle .
P16| Restore Factory Settings| N/A| Press the (-) button for five seconds to restore factory settings.
P21| Walk Mode Toggle| 0| 0: Walk Mode disabled 1: Walk Mode enabled

Functions

7-Speed Gear System
Your Aipas eBike comes with a 7-speed freewheel. The freewheel is the cluster of sprockets on the rear wheel of your bicycle. While pedaling in 1st gear (lowest gear using the largest sprocket), it will be easier to pedal up hills. In 7th gear (highest gear using the smallest sprocket), it will be easier to reach higher speeds on flat or downhill terrain.

Throttle WARNING!

• The right handlebar features a twist throttle.
• Check that the Pedal Assist (PAS) level is set above 0, then twist the throttle back slowly to achieve your desired speed and acceleration.

Mechanical Disc Brakes WARNING!
Your Aipas is equipped with mechanical disc brakes.

• To brake the front wheel
  Pull the left brake lever to activate the front brake.

• To brake the rear wheel
  Pull the right brake lever to activate the rear brake.

Front and Rear Lights
Your Aipas eBike comes with integrated front and rear lights.

• To turn lights ON : Press the button to turn on.
• To turn lights OFF : Press the button to turn off.

Suspension Fork
Please check to ensure your suspension forks are properly adjusted for the terrain and your weight. The black knob does not have a function. The suspension fork will affect the handling of the bicycle, primarily when going over bumps and stopping. In some situations, it may be advantageous to lock the suspension so it is fully rigid.

• Increase stiffness
  Turn the blue knob clockwise towards the” lock” direction indicated.

• Reduce stiffness
  Turn the blue knob counterclockwise towards the” open” direction. indicated.

• Fully lock suspension
  Turn the knob clockwise towards the “lock” direction indicated until it cannot be turned further.

How To Use Pedal Assist

• Pedal Assist (PAS) functions only when you are pedaling. If you do not pedal, the PAS will not activate. The motor output always depends on your pedaling and the PAS level you have set.
• PAS automatically switches off at the maximum speed set for your Aipas eBike (up to 28 mph). When the speed falls below the maximum set speed, PAS automatically becomes available again.
• You can also use your Aipas eBike as a normal bicycle without assistance at any time, either by turning off the display or by setting the PAS level to 0. PAS will not function if the battery is discharged.
• When the bicycle has not been used for 10 consecutive minutes, the display will automatically shut down. The PAS and throttle features will no longer work when the display is OFF.

Walk Mode
Electric bicycles are heavier than bicycles. To make walking the bicycle easier, your Aipas is equipped with Walk Mode, which can be toggled on or off in the settings menu. Walk Mode may be subject to local regulations. Check your local regulations to determine if it is allowed.

• To activate
  Hold down the minus (-) button on the display control pad and the motor will engage at a speed similar to a slow walk.

• To deactivate
  Pull either brake lever to disengage Walk Mode OR press and hold the minus (-)button on the display control pad.

NOTE: When Walk Mode is active,” Walking” will appear on the display.

Cruise Control
Cruise control on your Aipas works similarly to cruise control on a car. The bike will try to maintain a speed based on the position of the throttle when cruise control is activated. For example, if the throttle is twisted all the way from its resting position (to a position that would normally maintain 20 mph) and the minus button is held, cruise control will be activated and set at 20 mph. Even if the bike is currently going slower than 20 mph, the bike will try to accelerate and maintain that speed because it was set based on that throttle position.

To activate
Hold the minus (-) button while twisting the throttle.
To cruise at low speeds, only slightly twist the throttle and hold the minus (-) button.

NOTE: When Cruise Control is active, “Cruise” will appear on the display.

To deactivate
Pull either brake lever to disengage Cruise Control.

Warning Messages

Frame
Never modify your frame or bicycle in any way as this could cause serious injury or death. Do not sand, drill, file, or remove parts from your bicycle. Do not install incompatible components or hardware.

Motor & Electric System

• Do not open the drive unit yourself. The drive unit must only be repaired by qualified personnel using only original parts. This will ensure that the safety of the drive unit is maintained.
  Unauthorized opening of the drive unit will render warranty claims null and void.

• All components fitted to the drive unit and all other components of your Aipas eBike PAS system (e.g. chaining, chaining receptacle, pedals) must only be replaced with identical components or components that have been specifically approved by Aipas eBikes. This should help protect the motor from overloading.

• Always remove the battery pack from your Aipas eBike before beginning work (e.g. inspection, repair, assembly, maintenance, work on the chain, etc.), transporting it with a car or on an airplane, or storing it. Battery pack removal should prevent unintentional activation of your Aipas eBike.

• Do not make any modifications to your Aipas eBike or attach any other products that might increase the performance of your Aipas eBike. Doing so will generally reduce the service life of the system and risks damaging the drive unit and the bicycle. You also run the risk of losing the guarantee and warranty claims on the bicycle you have purchased.

• Under extreme conditions, such as continuously high loads at low speeds when riding up hills or carrying loads, parts of the motor can reach high temperatures.

Brake System

• ALWAYS apply the right brake lever (rear wheel) before and during the use of the front brake.ALWAYS apply even pressure to both brake levers when blowing down or stopping. If only the front brake is applied while slowing or stopping quickly, you may be ejected over the front handlebars.
• Before riding, check to ensure brake levers do not touch the handlebars when fully applied, If either lever touches the handlebars screw or unscrew the barrel adjuster to increase tension in the brake cable. If this does not fix the problem, take your bicycle to an experienced bicycle mechanic for further adjustment.
• Disc brake rotors will become hot during use and will stay hot for a short period after use. To prevent burns, do not touch the disc rotor right after use.

Electrical Components
Always turn lights ON for your safety, especially when riding at night or in low visibility situations.
Set the display brightness such that you can adequately see important information like speed or warning symbols. Display brightness that is incorrectly set can result in dangerous situations.

Do not allow yourself to be distracted by the display. If you do not concentrate on the trace around you, you risk being involved in a crash. If you want to change any settings other than the PAS level, always stop before changing the settings or display.

Range Estimates
The range the bicycle can go on a single battery charge can vary significantly between riders, terrain, wind conditions, user input, and additional cargo weight. The following table shows estimates of potential ranges riders may expect in different conditions.

All tests were performed with

Tips to Increase Range
To get the maximum range out of each battery charge, there are some simple things you can do

• Ride at a lower PAS level
• Use lower PAS levels and pedal when climbing hills
• Pedal when starting from a standstill

Battery

• Only place the battery pack on clean surfaces. Avoid getting dirt, e.g. Sand or soil, in the charging port and contacts.
• Do not charge or use a battery pack if it is damaged. Contact AipaseBikes to order a replacement.
• When unlocking and removing your battery pack from the frame, take care that it does not slide out while the bicycle is folded. If your battery impacts the ground and is damaged, discontinue use and contact Aipas eBikes immediately.

Top Speed
Your Aipas eBike ships with a maximum speed set at 20 miles per hour (mph). This means it is a Class 2 electric bicycle in states that recognize three classes of eBikes. In most states that only recognize eBikes generally, the 20 mph top speed is legal for use on public roads.

Thinks To Know Before The Ride

Things To Check

• Check your eBike to ensure the front axle, the rear axle, the handle-bars, and the seat are secure.
• Check that both the handlebar latch and frame latch are fully closed and locked.
• Check the tire pressure of both wheels.
• Pull the brake levers to make sure your brakes are working properly and adjust them if necessary.
• NEVER exceed the maximum total weight limit of 330 lbs. (150 kg). The rear rack can hold a maximum of 75 lbs. (35 kg). As an example, if you have 40 lbs. (18 kg) of cargo, then the maximum weight of the rider would be 290 lbs. (131 kg)
• Only carry the cargo you need. More weight will drain the battery faster and affect how the bike handles.
• Ensure all components are properly secured.
• Make sure your battery is fully charged.
• Please secure your helmet.

Safety Tips
The acceleration of your eBike might be faster than anticipated and may feel unadaptable at first. Before your ride, Please use the lowest level of pedal assist (PAS 1) and become familiar with the operation of your Aipas eBike by practicing starting, stopping, cornering, and navigating obstacles in a safe environment away from other bicycles, pedestrians, and/or vehicles. You should also pay particular attention to terrain conditions as you may approach obstacles faster than expected.

The Pedal Assist may be activated as soon as you step onto the pedals and the bicycle is in motion. ALWAYS be seated on the bicycle and engage at least one brake before starting to pedal. DO NOT place one foot on a pedal then throw your other leg over the bicycle or your eBike could accelerate unexpectedly.

How To Start And End Your Ride

1. Insert key and turn counterclockwise to the ON position. The key will be parallel with the frame and you will not be able to remove the key from the battery pack.
2. Hold down the button located on the left handlebar until the display comes on.
3. Select a Pedal Assist (PAS) level using the plus (+) and minus (-) buttons. PAS 0 provides no motor assist. PAS 1 is the lowest level of assist and PAS 5 is the highest level of assist.
4. When the bicycle is at a complete stop, press and hold the button to turn the display OFF. This ensures the motor will not activate until the display is turned ON again and you are ready to ride.

Note: Exercise extreme caution when using the twist throttle. When at a complete stop with the bicycle power ON, be careful not to twist the throttle, or the bicycle could accelerate and cause you  to crash.

Do not engage in Walking Mode when riding or sitting on your Aipas eBike. Holding the minus (-) button will engage the motor up to a walking speed.

Battery Safety

• Battery pack refers to all original Aipas eBikes battery packs.
• The safety of both our customers and our products is important to us. Our eBike batteries are lithium ion batteries, developed and manufactured with the latest technology. We comply with or exceed the requirements of all relevant safety standards. When charged, these lithium ion batteries contain a high level of energy. If a fault occurs (which may not be detectable from the outside), in very rare cases and under unfavorable conditions, lithium-ion batteries can catch fire. Take care when using and charging your battery. Failure to follow the guidelines below could damage property and/or serious injury. Contact Aipas eBikes immediately if you have any questions regarding battery safety.
• Your Aipas eBike battery must not be opened, even for repairs. There is a risk your eBike battery could catch fire, e.g. due to a short circuit. This risk increases if an eBike battery that has already been opened is reused at a later point in time. Do not attempt to repair an eBike battery in the event of a fault. Have it replaced with an original Aipas eBike battery pack.
• The battery is protected against deep discharge, overloading, overheating, and short-circuiting by Electronic Cell Protection (ECP). In the event of a fault, a protective circuit
• switches the battery pack off automatically.
• Only use original Aipas eBike batteries for your eBike. Using other batteries can lead to injuries and pose a fire hazard. Aipas eBikes accepts no liability or warranty claims if other batteries are used.

To prevent serious injury or death

• Do not leave your battery unattended while charging.

• When removing the battery, unplug the rubber stopper on the charging point.

• Please remove the battery from the bicycle when not in use and store in a secure location to prevent unauthorized use.

• Please do not submerge the battery in liquid of any kind.

• Do not touch the terminals on your battery.

• Turn the display OFF when not in use and before removing the battery pack.

• Battery leakage may occur under extreme usage or temperature conditions. Avoid contact with skin and eyes. Battery liquid is caustic and could cause chemical burns. If battery liquid comes in contact with the skin, wash quickly with soap and water. If the liquid contacts your eyes, immediately flush eyes with water for a minimum of 15 minutes and seek medical attention. The battery pack should not be excessively dicot to insert or remove. Do not force the battery pack in or out of the bike frame.

• Battery charging times may increase with battery age and usage.

• Only grab the charger by the plug and not the cable when plugging and unplugging from the wall.

• If the battery has trouble charging, stop charging and contact Aipas eBikes immediately.

• Do not puncture or crush the battery pack. Do not impact the battery pack or modify it in any way. Do not use the battery pack if it shows visible damage. The aforementioned can increase the danger of fire or explosion.

• Protect the battery pack from heat (e.g., temperature >140ºF), fire, and immersion in water. The aforementioned can increase the danger of fire or explosion.

• Always remove the battery pack before beginning work (e.g. inspection, repair, assembly, maintenance, work on the chain, etc.) on your Aipas eBike, transporting it via car or airplane, or storing it. Unintentional activation of the Aipas eBike poses a risk of injury.

• Do not open the battery. There is a risk of short-circuiting. Opening the battery voids any warranty claims.

• When the battery is not in use, keep it away from paper clips, coins, keys, nails, screws, or other small metal objects that could make a connection from one terminal to another. A short circuit between the battery terminals may cause burns or a fire. Short circuit damage which occurs in this instance voids any warranty claims against Aipas eBikes.

• Avoid mechanical loads and exposure to high temperatures. These can damage the battery cells and cause the flammable contents to leak out.

• Do not place the charger or the battery near flammable materials. Ensure the battery is completely dry and placed on a fireproof surface before charging. There is a risk of fire due to the heat generated during charging.

• Your Aipas eBike battery must not be left unattended while charging.
  If used incorrectly, liquid may leak from the battery. Contact with this liquid should be avoided. If contact occurs, rinse off with water. If the liquid comes into contact with your eyes, seek additional medical attention. Liquid leaking from the battery may cause irritation or scalding. Batteries must not be subjected to mechanical shock. If the battery is dropped or struck with another object, the battery may be damaged.

• The battery may give off fumes if it becomes damaged or is used incorrectly. Ensure the area is well-ventilated and seek medical attention if you experience any adverse effects. The fumes may irritate the respiratory system.

• Only charge the battery using the original Aipas eBikes chargers. When using chargers that are not made by Aipas eBikes, the risk of fire cannot be excluded.

• Use the battery only in conjunction with your Aipas eBike. This is the only way in which you can protect the battery against dangerous overload.

• Use only the original Aipas eBikes battery packs that the manufacturer has approved for your eBike. Using other batteries can lead to injuries and pose a fire hazard. Aipas eBikes accepts no liability or warranty claims if other batteries are used.

• Keep the battery away from children.

• Always turn the display OFF before removing the battery pack.

• Always remove the key from the battery pack after each use. This prevents both unauthorized use of the powered features of your Aipas eBike and removal of the battery by unauthorized persons when your Aipas eBike is not in use. Failure to secure your bicycle from unauthorized use can result in death or serious injury to others.

Charge Safety

Locate the charge port on the side of the battery. You can charge the battery from this port while the battery is in or out of the bicycle.

• Do not leave your battery unattended while charging.
• Do not connect the battery pack to the charger until it has reached an allowable charging temperature.
• Do not charge the battery with chargers other than the charger provided by Aipas eBikes.
• Only charge the battery indoors and in dry spaces that are not excessively hot or cold (with-in 10ºF of room temperature).
• Ensure there are no flammable items, dirt, or debris nearby when using the charger.
• The charger will automatically stop charging once the battery reaches its full capacity.
• The light on the charger will be red when the battery is charging and will turn green when charging has finished.
• Avoid leaving the charger plugged in when the battery is fully charged.
• Do not charge the battery if you notice the battery is damaged, excessively hot, leaking, smells, or is discolored.
• Charging the battery should take approximately 4-6 hours if the battery is mostly empty.
• Store the battery indoors in a dry space, away from heat or flame sources, and out of direct sunlight.
• The charger may get hot (>165°F) when charging. Use caution and avoid touching the body of the charger.
• To reduce the risk of injury, charge only the batteries of your Aipas eBike. Other types of batteries may burst, causing personal injury and damage.
• Only charge Aipas eBikes-approved lithium-ion battery packs. The battery pack voltage must match the battery pack charging voltage of the charger. Otherwise, there is the risk of fire and explosion.
• Only use the original Aipas eBikes battery charger supplied with your eBike or one approved for your eBike by the manufacturer and purchased from a trusted source. Bypassing the
• battery charger or the use of a non-approved or counterfeit battery charger can lead to death or serious injury.
• Do not expose the charger to rain or wet conditions. If water enters a charger, there is a risk of electric shock.
• Keep the battery charger clean. Contamination can lead to the risk of an electric shock. Clean only with the use of a damp cloth (mild soap/water).
• Always check the charger, cable, and plug before use. Stop using the charger if you find any damage. Do not open the charger. Damaged chargers, cables, and plugs increase the risk of electric shock.
• Do not operate the charger on easily ignited surfaces (e.g., paper, textiles) or in flammable environments. The charger may heat up and cause a fire.
• Take care if you touch the charger while it is charging. The charger can get very hot, especially when the ambient temperature is high.
• If the battery gives off fumes due to damage or incorrect use, ventilate the area and seek medical attention if needed. These fumes can irritate the respiratory tract.
• Batteries must not be subjected to mechanical shock. There is a risk of damage to the battery pack.
• Keep the battery charger away from children. This will ensure that children do not play with the charger.
• Persons who cannot safely operate the charger due to physical, sensory, or mental limitations, or due to lack of experience or knowledge, should only use it under supervision or after instruction by a responsible person to avoid operating errors and injuries.
• Note the household voltage! The voltage of the power supply must correspond to the specifica-options given on the battery charger nameplate.

To Charge

• Plug the cable from the charger into the port on the side of the battery pack.
• Plug the charger power cable into an electrical mains wall socket. Use only the supplied input connection: standard AC power cord when connecting to the household electrical supply.
• Note: The charging process is only possible when the temperature of your Aipas eBike battery is within the permitted charging temperature range.
• Note: PAS is deactivated during the charging process.
• After charging is complete and the light on the charger is green, disconnect the cable from the battery port and the power cord from the wall socket. If you have charged the battery in the bicycle frame, carefully insert the plug after charging, so that no dirt or water can enter the battery port.

Storing The Battery

Note of storing
Charging Battery Pack Before and During Storage

• When the battery pack will not be used for weeks or months, remove it from the eBike and store the battery pack at about 60 % charge as indicated by the Energy Bar on the display.
• At about 60% charge, the battery will degrade less, compared to higher charge levels. Every 2-3 months check the battery charge level and recharge to 60%, if necessary.
• Note: If the battery is stored at no charge for an extended period of time, it may be damaged despite the low self-discharge and may reduce the battery capacity.
• For optimum service life for your battery pack, charge the battery pack to 100% a few hours before you plan to ride. For example, if you ride the bicycle and the charge level falls to
• 50% but you plan to use the bicycle again in a few days, wait until the day before you plan to use it again to charge it to 100%.

DO NOT charge the battery unattended or leave the battery connected to the charger overnight.

• Leaving the battery permanently connected to the charger is not recommended.
• As the battery pack ages, capacity will diminish and the battery pack will eventually need to be replaced. A significantly reduced operating period after charging indicates that the battery pack is worn out and must be replaced. You may replace it yourself by purchasing a replacement battery pack from Aipas eBikes.

Storage Conditions

If possible, store the battery pack in a dry, well-ventilated place. Protect it from moisture and water. Always store your Aipas eBike battery pack in a location that

• The battery is in a room with a smoke alarm;
• The battery is away from combustible or easily flammable objects;
• The battery is away from heat sources.

For an optimum service life, store your Aipas eBike battery at temperatures between 50º F and 68º F. Never store it at temperatures below 14º F or above 140º F. Make sure the maximum storage temperature is not exceeded. Do not leave the battery in your car during the summer, for example, and store it away from direct sunlight.

NOTE: Leaving the battery installed on the bicycle for long-term storage is not recommended.

Troubleshooting

1. Charge the battery until the light on the charger turns from red to green. This may take up to 8 hours.
2. Insert key in the battery and turn counterclockwise to the ON position or until the key is parallel with the frame. Then press and hold the button to turn ON.
3. Follow the cable coming from the display down to the quick plug. You may need to unravel some of the plastic wrapping to access it. With a quick pull (do not twist), unplug the quick plug, inspect both sides of the plug, and reconnect by lining up the arrows on both ends. After checking the quick plug, press and hold the button on the display control pad to turn on.

Pedal assist or throttle do not work.|

1. Check that the PAS level is set between 1-5.
2. To test if PAS is working, do not operate throttle.
3. To test if the throttle is working, do not pedal.
4. Check all quick plugs.

Error Codes
The components of your Aipas eBike are continuously monitored automatically. If a fault is detected, the error code will appear on the display.

Maintenance

• Note: Our warranty does not include any maintenance fees
• You should have your bicycle maintained at regular service intervals at your local bicycle shop.
• NEVER open any of the components, including the battery, display, motor, or PAS sensor. Service should only be performed by a bicycle repair shop.
• Always remove the battery pack before performing any bicycle inspection, maintenance, or repair.
• If you suspect that something is loose, do not ride your bicycle. All nuts, bolts, and screws require the proper tightening force. Too little force and the fastener may not hold securely. Too much force and the fastener can strip threads, stretch, deform, or break. Either way, incorrect tightening force can result in component failure, which can cause you to lose control and crash. Take your bicycle to a bicycle repair shop for service.
• Do not paint any components of your Aipas eBike as they may cause premature failure of the component.
• Do not submerge your Aipas eBike or its components in water use a pressure washer to clean it.
• Always observe the operating and storage temperatures of your Aipas eBike and its components. Protect motor, display, and battery pack against extreme temperatures (e.g. from intense sunlight without adequate ventilation). Extreme temperatures can damage components (especially the battery pack). Please have your Aipas eBike serviced at least once a year.

Weekly, 100-200 mi

(160-321km)

|

• Check drivetrain for proper alignment and function (including the chain, freewheel, chainring, and derailleur).
• Check wheel trueness and for quiet wheel operation (without spoke noise).
• Check condition of frame for any damage.

|

• Clean frame by wiping frame own with damp cloth.
• Use barrel adjuster(s) to tension derailleur/brake cables if needed.

| Replace any components confirmed by Aipas Product Support or a certified, reputable bike mechanic to be damaged beyond repair or broken.
| Check brake pad alignment, brake cable tension.| Clean and lubricate drivetrain.|
Monthly, 250-750 mi

(402-1207km)

|

• Check bike is shifting properly, proper derailleur cable tension.
• Check chain stretch.
• Check brake and shifter cables for corrosion or fraying.
• Check spoke tension.

|

• Check crankset and pedal torque.
• Clean brake and shift cables.
• True and tension wheels if any loose spokes are discovered.

|

• Replace brake and shift cables if necessary.
• Replace brake pads if necessary.

| Check accessory mounting (rack mounting bolts, fender hardware, and alignment).| Balance the battery.|
Months, 750-1250mi

(1207-2011km)

| Inspect drivetrain (chain, chainring, freewheel, and derailleur).Inspect all cables and housings.|

• Standard tune-up by certified, reputable bike mechanic is recommended.
• Grease bottom bracket.

|

• Replace brake pads.
• Replace tires if necessary.
• Replace cables and housings if necessary.

Legal Warranty

• Aipas ebikes warrants to the original registered purchaser that Aipas ebikes shall be free from all defects in material and workmanship for a period of one year from the date of purchase. disclaimer of consequential and incidental damages: the original registered purchaser of this bike, subsequent owners, and all other intended and unintended users of this bike, shall not be entitled to recover from Aipas ebikes any consequential or incidental damages. there is no warranty of merchantability or fitness for a particular purpose. The warranty is non-transferable and only applies to the original owner. This warranty gives you specific rights and purchasers may also have other rights, which may vary from state to state. Damage caused by failing to follow instructions in the manual, acts of God, accident, misuse, neglect, abuse, commercial use, alterations, modification, improper assembly, installation of parts or accessories not originally intended or compatible with the Aipas eBike as sold, operator error, water damage, extreme riding, stunt riding, or improper follow-up maintenance is not covered under this warranty. Warranty parts will only be shipped within the continental United States.
• Parts covered by the warranty: frame, forks, stem, handlebars, headset, seat post, saddle, brakes (excluding brake pads), lights, bottom bracket, crank set, pedals, rims, wheel hub, freewheel, cassette, derailleur, shifter, motor, throttle, controller, wiring harness, display (excluding damage due to water), kickstand, reflectors, and hardware. The battery warranty does not include damage from power surges, use of 3rd party charger, improper maintenance or other such misuse, normal wear, or water damage (including rust).
• Accessories sold on Aipasbike.com are not covered under warranty.
• Stolen bikes are not covered under warranty.
• Necessary precautions must be taken to ensure the bike and battery are not exposed to severe weather conditions. Exposure to very wet, hot, or cold conditions may void the warranty. Aipas eBikes will replace any parts deemed to have been damaged during shipping. Shipping damage must be reported to Aipas eBikes within 14 days of shipment arrival.
• This applies to all products, including bikes and accessories.
• You will NOT be refunded as compensation for your time or efforts in replacing damaged parts.
• Replacement parts will not be sent until photographic evidence has been provided to Aipas eBikes. Aipas eBikes may request additional documentation (such as video) to assist with accurately diagnosing the problem and processing the warranty claim.
• Most warranty parts are fulfilled 1-10 business days after the request is put into our system by a customer service representative. Warranty parts are sent using USPS First Class,
• FedEx Express, or FedEx Ground, depending on the size of the part. Warranty parts will not be expedited.
• Items including the chain, tires, wheels, rims, tubes, battery handle, brake rotors, brake pads, cables and housings, grips, and spokes are considered wear items. These items wear down with normal use and are not covered under warranty. You are responsible for replacing and maintaining these worn items.
• Any unauthorized alterations or repairs are not covered and may void this warranty.
• For warranty services, please contact Aipas eBikes’ online support by email at service@aip-as-bike.com. Bikes or parts returned without proper documentation may result in delayed service or denied warranty coverage. Warranty return shipping costs along with duties and taxes are the responsibility of the claimant. All unauthorized returns will be refused.
• Note that your insurance policies may not provide coverage for accidents involving Aipas eBikes. To determine if coverage is provided, you should contact your insurance company or agent. Damage as a result of an accident is not covered under this warranty, and Aipas eBikes is not responsible for the repair or replacement of damaged bikes or parts.
• Aipas eBikes reserves the right to change its warranty at any time and without notice.
• Any action, lawsuit, or other proceeding, under this warranty or otherwise related to the bike must be commenced within ninety (90) days after expiration of the one-year warranty period. Performance Disclaimer
• The bikes listed range and top speed are estimates (not guarantees) of expected performance. Performance will vary with rider weight, cargo weight, rider/cargo shape (both contribute to drag), terrain, tire pressure, brake adjustment, throttle vs PAS usage, pedal power, battery charge level, ambient temperature, and wind conditions. Under certain conditions, it is possible to get ranges and top speeds that are different from the listed estimates.

Liability Disclaimer
Riding any kind of bicycle comes with inherent risks and dangers that cannot be predicted or avoided. These dangers could result in a serious accident, injury, or death of the rider. It is the sole responsibility of the rider to become properly educated and prepared to ride safely. Once in possession of the bike, Aipas eBikes strongly encourages and recommends that all customers have a certified and reputable bicycle mechanic complete a full inspection of each component on the bicycle to ensure it is safe for operation. Aipas eBikes makes no claims or guarantees that the brakes, battery, frame, motor, motor controller, display, electrical cables, electrical cable housings, fasteners, grips, fork, stem, shifters, headset, seat post, seat post clamp, handlebar stem clamp, saddle, wheel hubs, handlebars, spokes, rims, tires, tubes, derailleur, freewheel, cassette, throttle, kickstand, lights, reflectors, hardware, bottom bracket, or any other part or accessory, will be properly secured and adjusted upon arrival. Before every ride, fully inspect your bicycle to ensure everything is secured and adjusted properly.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

• This device may not cause harmful interference
• This device must accept any interference received, including interference that may cause undesired operation.
• Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits of a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• This equipment complies with radio frequency exposure limits set forth by the FCC for an uncontrolled environment.
• This equipment should be installed and operated with a minimum distance of 5 mm between the device and the user or bystanders.
• This device must not be co-located or operating in conjunction with any other antenna or transmitter.

References

• Aipas Meets Your Diverse Travel Needs
• as-bike.com
• Aipas Meets Your Diverse Travel Needs

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>