Quntis YS-TL23064 LED Dimmable Desk Lamp User Manual
- July 23, 2024
- Quntis
Table of Contents
Quntis YS-TL23064 LED Dimmable Desk Lamp
Product Size
Double heads lamp & gooseneck design
- The gooseneck can be rotated 180° up, down, left, and right.
- And the single lamp head can be rotated 170°, and The lamp body can be rotated 360 °
Product Parameters
Angle Adjustment
Product Specification
- Input Voltage: 100-240V EU plug 220-240V
- Input Power: Max 24w
- CRI: ≥95 Ra
- Color Temperatur: 2700K-6500k
- Material: Aluminum+ ABS+PC
- Lumen: 1000Lm
- Stepless Brightness: 5%-100%
- Working Humidity: 0% ~ 85% RH
- Working Temperature: -10°C ~ +40°C
Installation Instructions
Installation Steps
- Fix the Clamp on the desktop;
- Align the lamp column and insert it into the base, tighten and secure the hand screws;
- Insert the raised portion of the lamp in the same direction as the recessed portion of the support bar;
- insert the raised part of the lamp head into the recessed part of the round hole of the lamp.
Product Schematic
Product Features
Function 1: Touch control
- Short press “ ” button to turn on/off the light;
- When the light is on, short press the “ ” button to switch the color temperature, 5 levels in total(2700K-3500K-4000K-5300K- 6500K). Long press to adjust the color temperature steplessly;
- Short click” “: When the light is on, short click to increase the brightness by one level, 5 levels (5%-25%-50%-75%-100%), Long press to adjust the brightness steplessly;
- Short click” “: When the light is on, short click to reduce the brightness by one level, 5 levels (*100%- 75%-50%-25% -5%), and long press to adjust the brightness steplessly.
Function 2: Memory function
In the case of power interruption, the color temperature and brightness of the
light will remain the same when the light is turned on again after turning it
off last time.
Accessories
- Lamp head * 1
- Clamp base * 1
- Tube * 1
- Adapter * 1
- Support rod * 1
- Manual * 1
Notes
- This product does not have a waterproof function, please do not use it in a humid environment;
- Do not install this product near the heat source, such as an air conditioner outlet, heating outlet, humidifier, or other places where the temperature changes drastically (the working temperature of the product is -10°C~40°C);
- Do not disassemble this product by yourself to avoid damage to internal parts;
- Other objects cannot cover the induction area on the surface of the product. Please use a clean and soft cloth to wipe the surface, Prohibit the use of corrosive solvents for cleaning.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>