TOPDON T-Kunai Universal Programer User Manual

TOPDON T-Kunai Universal Programer

Specifications

• Working Temperature: TBD
• Storage Temperature: TBD
• Ports: TBD
• Input Voltage: TBD
• Dimensions (L x W x H): TBD
• Net Weight: TBD

Product Usage Instructions

Terminology

• EEPROM: Electrically Erasable Programmable Read-Only Memory
• FLASH: Flash memory used to store chip programs
• D-FLASH: Data flash memory with functions similar to EEPROM
• P-FLASH: Program flash memory similar to FLASH
• ROM: Read-Only Memory for storing chip programs
• EEE: Emulated EEPROM with functions similar to EEPROM
• POF: Single programming area where data can only be written once

Section 3: Getting Started

1. Ensure you have read the safety instructions in the manual thoroughly.
2. Connect the universal programmer to a compatible device or vehicle as per the manufacturer’s guidelines.
3. Familiarize yourself with the different functions and capabilities of the device.
4. Refer to the user manual for specific procedures on key programming, module maintenance, and airbag repair.

Section 4: Update
To ensure optimal performance, periodically check for updates on the manufacturer’s website and follow the instructions provided to update the programmer.

Frequently Asked Questions (FAQ)
Q: Can the universal programmer be used on all vehicle models?
A: The universal programmer is designed to work with a wide range of vehicle models. However, it’s recommended to check compatibility with specific models before use.

SAFETY IS ALWAYS THE FIRST PRIORITY!

READ ALL INSTRUCTIONS BEFORE USE

• For your safety, the safety of others, and to avoid any damage to the product and your vehicle, CAREFULLY READ AND MAKE SURE YOU FULLY UNDERSTAND ALL THE SAFETY INSTRUCTIONS AND MESSAGES ON THIS MANUAL BEFORE OPERATING. You must also read the vehicle’s service manual, and observe the stated precautions or instructions before and during any test or service procedure.
• Keep yourself, your clothing and other objects away from moving or hot engine parts and avoid contact with electrical connections.
• ONLY OPERATE THE VEHICLE IN A WELL-VENTILATED AREA, as the vehicle produces carbon monoxide, a toxic and poisonous gas, and particulate matter when the engine is running.
• ALWAYS WEAR APPROVED SAFETY GOGGLES to prevent damage from sharp objects and caustic liquids.
• DO NOT SMOKE OR HAVE ANY FLAMES NEAR THE VEHICLE when testing. The fuel and battery vapors are highly flammable.
• DO NOT ATTEMPT TO INTERACT WITH THE PRODUCT WHILE DRIVING. Any distraction may cause an accident.
• Never collide, throw, or puncture the test equipment, and avoid falling, extruding and bending it.
• Do not insert foreign objects into or place heavy objects on your device. Sensitive components inside might cause damage.
• Do not use the test equipment in exceptionally cold or hot, dusty, damp or dry environments.
• In places using the test equipment may cause interference or generate a potential risk, please turn it off.
• The test equipment is a sealed unit. There are no end-user serviceable parts inside. All internal repairs must be done by an authorized repair facility or qualified technician. If there is any injury, please contact the dealer.
• Never place the test equipment into apparatus with strong electromagnetic field.
• Do not attempt to replace the internal rechargeable lithium battery. Contact the dealer for factory replacement.
• Use the included battery and charger. Risk of explosion if the battery is replaced with an incorrect type.
• Do not disconnect power abruptly when the test equipment is being formatted or in process of uploading or downloading. Or else it may result in program error.
• Do not disconnect battery or any wiring cables in the vehicle when the ignition switch is on, as this could avoid damage to the sensors or the ECU.
• Do not place any magnetic objects near the ECU. Disconnect the power supply to the ECU before performing any welding operations on the vehicle.
• Use extreme caution when performing any operations near the ECU or sensors. Ground yourself when you disassemble PROM, otherwise ECU and sensors can be damaged by static electricity.
• When reconnecting the ECU harness connector, be sure it is attached firmly, otherwise electronic elements, such as ICs inside the ECU, can be damaged.
• DISCLAIMER: TOPDON shall not be liable for any damage or loss arising from the use of this product.

SECTION 1 WHAT’S IN THE BOX

•  T-Kunai Device
• EEP Adapter
• USB Cable
• SOP 8 Adapter
• Power Adapter
• ECU Cable
• MCU Cable
• MC9S12 Cable
• EVA Package
• User Manual

SECTION 2 PRODUCT OVERVIEW

T-Kunai is TOPDON’s universal automotive programmer for car key programming, module maintenance and airbag repair. This tool can read and write EEPROM, MCU and ECU, identify car remote transponder chip, detect frequency, identify NFC card, identify and copy ID or IC card, repair airbag and mileage. More functions are coming soon.

Terminology

• EEPROM: Electrically Erasable Programmable Read – Only Memory, usually used to store data generated during the operation of the chip.
• FLASH: Flash memory, usually used to store the program of the chip.
• D-FLASH: Data flash memory, with the same function as EEPROM.
• FLASH: Program flash memory, with the same function as FLASH.
• ROM: Read Only Memory, usually used to store the program of the chip, cannot be erased and programmed.
• EEE: Emulated EEPROM, with the same function as EEPROM.
• POF: Single programming area, data can only be written once and cannot be erased (rarely used).

specifications

• Working Temperature 10°C – 40°C (14°F – 104°F), humidity < 90%
• Storage Temperature  -20°C – 75°C (-4°F – 167°F), humidity < 90%
• Ports USB Type-C, DB26, DC12
• Input Voltage 12V DC 2A
• Dimensions (L x W x H)  174.5 x 92.5 x 33 mm (6.97 x 3.64 x 1.30 in.)
• Net Weight  0.27 kg (0.60 lb)

Components and Ports

1. Remote Control Frequency Detection Area
   Place the remote control near this area to detect car remote control frequency.

2. Transponder Chip Slot
   Place the transponder chip to read and write vehicle transponder chip information.

3. Key Slot
   Place the car key to read and write vehicle key information. Card-type keys can be placed on a flat surface.

4. Infrared Key Slot
   Place the infrared key to read and write Mercedes-Benz infrared key transponder chip information.

5. Power Indicator
   Solid green indicates 12V DC power is connected.

6. NFC Detection Area
   Place the NFC car key to read card information, or place supported IC or ID card to copy card information.

7. Status Indicator
   Solid blue indicates T-Kunai is connected to a computer or a tablet such as T-Ninja Pro. Flashing blue indicates function operation or data transmission.

8. EEPROM Socket Lock
   Combined with the SOP 8 adapter to read and write SOP memory chip EEPROM data.

9. 10PIN, 20PIN DIY Slot
   To connect the DIY cable or Dupont line. It is used to read and write special ECU and MCU. It can also be combined with the EEP adapter to program memory data.

10. USB Type-C Port
    Provides data communication and 5V DC power supply.

11. DC Port
    Connects the power adapter and provides 12V DC power supply.

12. DB26 Port
    Three components can be connected to this port: MCU cable, ECU cable, MC9S12 cable.

Cable Definitions
MCU Cable

ECU Cable

SECTION 3 GETTING STARTED

Software Interface

1. Tool options

   • File: To load data files.
   • Window: To tile or cascade HEX text windows.
   • Language: To switch software language.
   • Help: Includes Feedback, Function List, User Manual and About.
   • Settings: Includes Operation Settings (read and verify, write and verify, erase and check blank) and Update.

2. Account
   To log in or log out to your account.

3. Connection status
   The connection status and SN information will be displayed if the device is successfully connected.

4. Common options

   • New: To create a new HEX text.
   • Open: To open a local file.
   • Save: To save the file of the current window.

5. Function options
   Optional: Programming, Reading and Writing, Airbag Repair, Mileage Repair, ECU/TCU Clone (coming soon), supports more than 6000 types, and will continue to upgrade more types soon.

6. Operation options
   After selecting a function, you can click Read, Write, Verify, Erase, and Check Blank to perform the corresponding operations.

7. Wiring Diagram
   After selecting a function, you can view the corresponding wiring diagram and zoom in or zoom out in equal proportions.
   Reading Range and Special Options
   Some chips include multiple data areas, such as EEPROM, DFLASH, PFLASH. You can click Read Chip ID, Lock Chip or Unlock Chip to perform the corresponding operations.

8. HEX Text
   Displays HEX text information, read data, or loaded file data.

9. Display Mode

10. You can switch the HEX text display mode of the current window, including Lo-Hi, 8bit, 16bit, and 32bit.

11. Operation Log
    Displays prompts for each operation

Function Descriptions

Programming, Reading and Writing
Memory chip supports multiple brands including Adesto Technologies, AKM, ALTERA, AMIC, ATMEL, CATALYST/ONSEMI, CHINGIS (PMC), EON, ESMT, EXEL, FAIRCHILD/NSC/RAMTRON, FUJITSU, GIGADEVICE, GRUNDIG, HOLTEK, KHIC, MXIC, MICROCHIP, MICRON, MITSUBISHI, NEC, NUMONYX, OKI, PCT, PHILIPS, ROHM, SEIKO (SII), SPANSION, STT, ST, WINBOND, XICOR, YMC and so on. MCU support multiple brands, including MOTOROLA/FREESCALE, FUJITSU, NATION, NXP, RENESAS, ST and so on.

Airbag Repair
It will support more than 50 common car brands and more than 2,000 types of airbag repair.

Mileage Repair
It will support more than 50 common car brands and more than 2,000 types of mileage repair.

ECU/TCU Clone
ECU/TCU module clone function (coming soon).

RFID/IR/NFC
Use the supplied USB cable to connect T-Kunai to T-Ninja Pro, and you can perform operations such as Transponder Recognition, Frequency Detection, Generate Transponder, Write Key via Dump, IR Key and NFC Card (coming soon).

Use the supplied USB cable to connect T-Kunai to T-Ninja Pro, and you can perform operations such as Transponder Recognition, Frequency Detection, Generate Transponder, Write Key via Dump, IR Key and NFC Card (coming soon).

1. Transponder Recognition
   Place the key in the Key Slot to detect vehicle key transponder chip ID information.

2.  Frequency Detection
   Place the remote control near the area of T-Kunai.
   Then press any button on the remote control to detect the frequency information of the remote control.

3. Generate Transponder
   Ordinary car anti-theft transponders can be rewritten into special transponders. For example, you can use the LKP 46 blank transponder to generate a 46 GM special transponder. After successful rewriting, it can be used for anti-theft key matching of GM related models.

4. Write Key via Dump
   Write Key via Dump can generally be divided into two forms. The first is to write the key ID in the original data to the new transponder chip, without changing the original data of the car. This only changes the new chip ID.
   The second is to write the new key ID into the anti-theft data, without changing the new key ID. This only change the original key ID in the original car anti-theft data to the new key ID.
   Currently most car models can be directly matched or copied. Write Key via Dump becomes valuable in the case of failure to match or copy, such as OBD communication failure, abnormal vehicle status. Some car models require special chips for matching, while Write Key via Dump require the corresponding blank chip.

5. IR Key
   Insert the infrared key in the Infrared Key Slot to identify the infrared key transponder chip information. It is commonly used in infrared keys for Mercedes-Benz and Infiniti.

6. NFC Card
   Place the NFC card near the area to identify NFC card information. Currently it supports identifying NFC card keys of common models and copying most IC or ID cards.

SECTION 4 UPDATE

Click Settings from the tool options. Then select Update.

1. The system will automatically detect available new software or firmware version.
2. The system will display prompts if your computer is disconnected from the internet or the device.
3. No update is required if the current software or firmware is the latest version.
4. If a new version is available, you can click Update to update the software or firmware, or click Ignore to refuse the update.
5. Click Update, the system will start updating and display the progress percentage. When the percentage reaches 100%, you can click Install to install the new software or firmware version, or click Ignore to exit the installation.

Tips: If you choose Ignore to exit the installation, you will need to download again for subsequent updates.

SECTION 5 WARRANTY

• TOPDON’s One-Year Limited Warranty
• TOPDON warrants to its original purchaser that the company’s products will be free from defects in material and workmanship for 12 months from the date of purchase (Warranty Period).
• For the defects reported during the Warranty Period, TOPDON will either repair or replace the defective part or product according to its technical support analysis and confirmation.
• TOPDON shall not be liable for any incidental or consequential damages arising from the device’s use, misuse, or mounting.
• If there is any conflict between the TOPDON warranty policy and local laws, the local laws shall prevail.
• This limited warranty is void under the following conditions:
• Misused, disassembled, altered or repaired by unauthorized stores or technicians.
• Careless handling and/or improper operation.

Notice: All information in this manual is based on the latest information available at the time of publication and no warranty can be made for its accuracy or completeness. TOPDON reserves the right to make changes at any time without notice.

SECTION 6 FCC

FCC Statement:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

TEL

• 86-755-21612590
• 1-833-629-4832 (NORTH AMERICA)
• B EMAIL SUPPORT@TOPDON.COM
• EB) WEBSITE WWW.TOPDON.COM
• FACEBOOK@TOPDONOFFICIAL
• ¼ TWITTER@TOPDONOFFICIAL

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>