Weofly Global Weofly Explorer Smart Watch User Manual
- July 23, 2024
- Weofly Global
Table of Contents
Weofly Global Weofly Explorer Smart Watch
Instruction for Use
Warm Reminder: This product needs to download the APP, connect to Bluetooth through the APP, and cannot connect to Bluetooth alone. Please notice.
- Smart watches can measure heart rate and blood oxygen, but cannot be used for any medical functions;
- Charging: Please charge your smartwatch before use and make sure it is fully charged. Please make sure that the ejectpins of the 2 magnetic charging cables are aligned with the 2 charging contacts of the main unit, or plug the charging cables into the USB adapter (adapter 5V 1 A). Make sure that the metal contacts are free of dust, oxidation, and impurities. While charging, a charging icon will appear on the smartwatch’s screen. If you don’t use your smartwatch for a long time, please charge it once a month.
- Do not use a power adapter with an output current of more than 2A for charging, otherwise, the smartwatch will be damaged.
- Do not shower with hot water or place the smartwatch under high temperature; otherwise, the water resistance of the smartwatch will be damaged.
- Do not charge when wet or with water.
Appearance
-
Product instruction
-
Remove Strap and Charge mode
Package List
A. Package Box1
B. Smart Watch1
C. User Manual1
D. Magnetic USB Charger Cable1
Application installation and Bluetooth connection
Please search “fltcloud pro” in My app and Google Play on Android devices or
APP Store on iPhone; or scan the QR code below to download and install the
application.
Note: Android supports 5.0 and above; IOS supports 10.0 and above;
Bluetooth hardware 5.0 and above; Bind the smartwatch. Click on the selection
of bind device and then fmd the device you want to connect to. If there are
multiple devices In the vicinity, select the MAC address of the smartwatch you
want to bind. If the smartwatch is successfully tied to the phone, the
Bluetooth icon will display at the top of the smartwatch.
Product Parameters
Main control chip: RTL8763 EWE
Bluetooth: BLE 5. 2
Screen size: 1.43 inches, AMOLED
Battery capacity : 400 mAh
Battery type : Polymer battery
Use time: 7-1 0 days
Waterproof level : IP68
Charging method : magnetic USB cable
Operating temperature: 0- 40 •c
Compatibility : 10S 10.0 or above; Android 5.0 or above; flt most mobile device on the market.
Instruction for Use
Press the side button or lift your hand to wake up the screen, and press and hold for 3 seconds to switch the interface in the home page. Slide up to enter the information bar; slide down to enter the control center; slide left to enter the sports data; slide right to enter the function list.
Function Description
-
Replace the Watch Dial Long press the main page for 3 seconds to enter the watch dial replacement page. Or download the replacement dial on the app.
-
Control Center
Slide down to enter the control center. There are: Do not disturb mode; Brightness Adjustment; Settings ; Find my phone; System; Shutdown and Setting. -
Brlghtness Adjustment
Slide down to the control center and click the brightness adjustment Icon to adjust the brightness of your device. -
Do Not Disturb Mode
Slide down to the control center and click the Do not disturb Icon to confirm that do not disturb mode Is on. -
Find My Phone
Slide down to the control center, click Find my Phone icon, and your phone will vibrate to alert you. -
System
Slide down to the control center, click system to view the system version. -
Settings
Slide down to the control center and click the settings icon to enter the function setting. -
Information
Slide up to the control center, click audio icon, open audio mode. -
Sport Data
Slide once to the left to the sports data page, view the sports data, and record steps, calories, and kilometers separately. -
Heart Rate
Slide twice to the left to the heart rate page, start measure and show the data. -
Call Function
This function needs to be connected to audio Bluetooth.
When entering the dial, you can enter the phone number and call as needed; long press on the keyboard 7 and 9 to enter *and# -
Sport Mode
Slide right to enter the list function, click to enter the sports mode and select your preferred sports mode. -
Weather
Slide right to enter the list function, click the weather icon and view the weather. -
Music Control
Slide right to enter the list function, click to enter the music control to adjust the upper and lower song titles.
Other Functions
Alarm clock Find the watch reminder Call reminder Drink water reminder Sedentary reminder Low power reminder Remote camera(start from APP) Find phone Timer
Cautions
-
Why should I wear my smartwatch tightly when measuring my heart rate?
Using the principle of light reflection, the smartwatch penetrates the skin with a light source and collects the signal reflected on the sensor to calculate the heart rate. If not worn tightly, ambient light will enter the sensor and affect the measurement accuracy. -
Not recommended to wear in a hot bath: the first factor: a hot bath will produce steam due to the high temperature of the bath water, it is easy to produce a lot of steam. Steam is a gas with a small molecule radius, so it can easily penetrate the gap on the intelligent smartwatch casing. When the temperature drops, the water will gradually condense into water droplets, which will cause damage to the circuit board and further damage the smartwatch.
-
When connecting Bluetooth. Make sure the Bluetooth of your phone and the smartwatch are turned on. When doing a Bluetooth search, please make- sure the smartwatch is not connected to another account number, when doing a Bluetooth search, please keep the smartwatch and the phone as close as possible.
-
If the user’s phone has installed other software, such as Mobile Manager, in order to ensure the normal operation of the background APP, please turn on the phone’s message push and allow background operation, otherwise it can not push messages.
-
To ensure the accuracy of the test data, after entering the blood oxygen test mode, stay relaxed and still during the test and make sure the smartwatch and your heart are at the same height. Please do not talk during the test. (This function provides data reference for blood oxygen changes before and after human exercise and cannot be used for medical purposes).
Battery Information
| Battery Material | Lithium polymer battery |
|---|---|
| Battery Model | 582728 |
| Battery Power Parameter | 1.48 Wh |
| Nominal Voltage | 3.7V |
| Rated Capacity | 400mAh |
Warning
This product is not a medical device. This smartwatch and its applications are not available for diagnosis, treatment or preventive therapy of diseases. Consult a medical professional before changing your exercise habits and sleep habits to avoid serious injury. The manufacturer reserves the right to modify and improve the functional descriptions of the user guide, as well as to update the content on an ongoing basis without notice. This user guide is for reference only, for smartwatch sold here, please refer to the final product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>