CONCEPTRONIC DANTE05G M.2 NVMe SSD Enclosure Installation Guide
- July 23, 2024
- CONCEPTRONIC
Table of Contents
CONCEPTRONIC DANTE05G M.2 NVMe SSD Enclosure
Product Usage Instructions
- Press the button while removing the PCB from the enclosure.
- Install the M.2 SSD onto the PCB.
- Use the fasteners to secure the SSD.
- Slide the PCB back into the enclosure.
- Connect the USB-C end of the included cable to the enclosure and the other end to a free USB-C or USB-A port on your computer.
- The computer will automatically recognize and install the new hardware. No driver installation is required.
- Read the operating instructions carefully and observe thesafety information.
- Avoid water, humidity, fire, or hot environments.
- Keep the device away from children and store all parts and accessories out of their reach.
- Avoid dropping, throwing, or crushing the device.
- Do not open, change, or damage the device.
- Disconnect from the mains before cleaning and use a dry,fibre-free cloth for cleaning.
FAQ
Q: What are the system requirements for DANTE05G?
A: Windows XP/Vista/7/8/10/11, macOS, hromeOS. PC or laptop with an available USB-A or USB-C port.
Q: How do I clean DANTE05G?
A: Disconnect from power before cleaning. Use a dry, fibre-free cloth to clean the product.
Q: What should I do with DANTE05G at the end of life?
A: Dispose of the product at a recycling point and do not mix it with household waste to prevent harm to the environment or injury.
Q: How do I connect DANTE05G to my computer?
A: Connect the USB-C end of the included cable to the enclosure and the other end to a free USB-C or USB-A port on your computer.
Q: Do I need to install drivers for DANTE05G?
A: No, the computer will automatically recognize and install the new hardware without the need for driver installation.
Q: Can DANTE05G be used with both USB-C and USB-A ports?
A: Yes, DANTE05G is compatible with both USB-C and USB-A ports.
Q: What is included in the package contents of DANTE05G?
A: The package includes DANTE05G, USB-C, and USB-A 2-in-1 cable, fixed fasteners, and a Quick Installation Guide.
PACKAGE CONTENTS
INSTALLATION
SPECIFICATION
| Connector | USB-C female |
|---|---|
| USB version (speed) | USB 3.2 Gen 2 (10Gbps) |
| Drive Compatibility | M.2 PCIe NVMe SSD |
| Operating temperature | 0°C ~ 45°C |
| Dimensions (W x D x H) | 38.4 x 104.5 x 12.5 mm |
| Weight | 65g |
| Case material | Aluminum |
| Package contents | DANTE05G |
USB-C and USB-A 2-in-1 cable Fixed fasteners
Quick Installation Guide
System Requirements
- Windows XP/Vista/7/8/10/11, macOS, ChromeOS
- PC, laptop with available USB-A or USB-C port
Installation and usage
- Press the button while removing the PCB from the enclosure.
- Install the M.2 SSD onto the PCB. Use the fasteners to secure the SSD.
- Slide the PCB back into the enclosure.
- Connect the USB-C end of the included cable to the enclosure and the other end to a free USB-C or USB-A port on your computer.
The computer will automatically recognize and install the new hardware. No driver installation is required.
Safety and warning instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
- Keep the device away from water, humidity, fire, or hot environments.
- Keep your device and all its parts and accessories out of the reach of small children.
- Do not leave the packaging material lying around carelessly. This may become dangerous playing material for children.
- Avoid dropping, throwing, or crushing the device.
- Do not open, change, or damage the device.
- Disconnect the product from the mains before cleaning.
- Clean the product with a dry, fibre-free cloth.
Disposal of waste electrical equipment
- Dispose of the product at a recycling point.
- Do not dispose of together with household waste.
- Incorrect storage/disposal can harm the environment and/or cause injury.
CE / UKCA marking
- Conceptronic declares that this product complies with the directives listed in the section ‘Declaration of Conformity’.
CONTACT
Need Help?
Digital Data Communications GmbH – Im Defdahl 10 F, 44141 Dortmund, Germany CONCEPTRONIC® is a registered trademark of Digital Data Communications GmbH © Copyright Digital Data Communications GmbH. All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>