CONCEPTRONIC LORCAN04B 4 Button Dual Mode Wireless Mouse Installation Guide

: July 23, 2024
: CONCEPTRONIC

Table of Contents

CONCEPTRONIC LORCAN04B 4 Button Dual Mode Wireless Mouse
Product Usage Instructions
FAQ
PACKAGE CONTENTS
MOUSE BUTTON
INSTALLATION
SPECIFICATION
Installation and usage
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CONCEPTRONIC LORCAN04B 4 Button Dual Mode Wireless Mouse

Product Usage Instructions

Open the battery compartment on the bottom of the mouse.
The USB nano receiver is inside the battery compartment.
Insert the included AA battery into the mouse. Close the battery compartment.
Connect the USB nano receiver to a USB port on your computer or laptop.
Turn on the mouse by switching the on/off switch, and it will be ready to use.

Switching Connection Modes

For the first use, the mouse defaults to 2.4G mode. To switch to Bluetooth pairing mode, press and hold the DPI button for 5 seconds.
To switch back to 2.4G mode, press and hold the DPI button for 5 seconds again.
The red LED indicates 2.4GHz mode, and the blue LED indicates Bluetooth mode.
Read the operating instructions carefully and observe safety information.
Avoid water, humidity, fire, or hot environments.
Keep devices away from small children and avoid leaving packaging material accessible to them.
Avoid dropping, throwing, or crushing the device.
Do not open, change, or damage the device.
If a battery leaks, prevent contact with skin, eyes, clothes, or surfaces.
Observe signs restricting electronic device use and turn off the device as instructed.
Do not dispose of waste electrical equipment and batteries with household waste. Hand them to your local recycling point.
Batteries should be fully discharged when disposed of to prevent harm to the environment or injury.
Conceptronic declares that this product complies with the directives listed in the section ‘Declaration of Conformity’.

FAQ

Q: How do I know if the mouse is in Bluetooth mode?
A: The blue LED indicates that the mouse is in Bluetooth mode.
Q: Can I use this mouse with a Chromebook?
A: Yes, this mouse is compatible with ChromeOS.

PACKAGE CONTENTS

MOUSE BUTTON

INSTALLATION

SPECIFICATION

Connection mode	Bluetooth 5.2 / 2.4GHz Wireless
Frequency range	2402 – 2480MHz
Maximum output power (EIRP)	3dBm
Rated voltage	1.5V
DPI setting	800 / 1200 / 1600
Compatible operating systems	Windows XP / 7 / 8 / 10 / 11, macOS ChromeOS,

Android

Installation and usage

Open the battery compartment on the bottom of the mouse. The USB nano receiver is inside the battery compartment.
Insert the included AA battery into the mouse. Close the battery compartment.
Connect the USB nano receiver to a USB port on your computer or laptop.
Turn on the mouse by switching the on/off switch, and it will be ready to use.
For the first use, the mouse defaults to 2.4G mode. To switch to Bluetooth pairing mode, press and hold the DPI button for 5 seconds. To switch back to 2.4G mode, press and hold the DPI button for 5 seconds again.
The red LED indicates 2.4GHz mode, and the blue LED indicates Bluetooth mode.

Safety and warning instructions
Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling in this manual, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

Keep the device away from water, humidity, fire or hot environments.
Keep your device and all its parts and accessories out of the reach of small children.
Do not leave the packaging material lying around carelessly. This may become dangerous playing material for children.
Avoid dropping, throwing or crushing the device.
Do not open, change or damage the device.
If a battery leaks, keep the leaked fluid from touching your skin, eyes, clothes, or other surfaces.
Observe signs and notices that prohibit or restrict the use of electronic devices.
Turn off your device in any location where instructed to do so.
Turn off your device before cleaning.

Disposal of waste electrical equipment and batteries

Do not dispose of waste electrical equipment and batteries with household waste.
Please hand them to your local recycling point.
Batteries should be fully discharged when disposed of.
Incorrect storage/disposal can harm the environment and/or cause injury.

CE marking

Conceptronic declares that this product complies with the directives listed in the section ‘Declaration of Conformity’.

CONTACT

Need Help?

Digital Data Communications GmbH – Im Defdahl 10 F, 44141 Dortmund, Germany CONCEPTRONIC® is a registered trademark of Digital Data Communications GmbH © Copyright Digital Data Communications GmbH. All Rights Reserved.