Danfoss NC, NO Thermot Actuator Installation Guide
- July 23, 2024
- Danfoss
Table of Contents
Danfoss NC, NO Thermot Actuator
Product Information
Specifications
- Product Name: Danfoss 88H219
- Model Number: 088R0258
- Product Type: Thermot Actuator
- Supply Voltage: 24 V AC/DC (Class II (SELV)) and 230 V AC (3A pre-fuse)
- Frequency: 50-60 Hz
- Power Consumption: 2 W
- Spindle Travel Time: ~3 min
- Ambient Temperature: Suitable for IP41 Enclosure
- Cable Length: 600 mm
- Certification: CE
Product Usage Instructions
Installation Guide
- Ensure the power supply matches the required voltage (24 V AC/DC or 230 V AC).
- Thread the Thermot actuator onto the designated M30 x 1.5 location securely.
- Connect the cables following the specified cable length of 600 mm.
- Ensure the ambient temperature is within the suitable range for IP41 enclosure.
Operating Instructions
- Apply power to the actuator using the correct voltage supply.
- Monitor the spindle travel time, which is approximately 3 minutes for full travel.
- Observe the power consumption of the actuator, which should be around 2W during operation.
- Maintain the ambient temperature within the specified range for optimal performance.
OVERVIEW
Installation
Technical Data
Disposal note
This symbol on the product indicates that it may not be disposed of as
household waste.
It must be handed over to the applicable take-back scheme for the recycling of
electrical and electronic equipment.
- Dispose of the product through channels provided for this purpose.
- Comply with all local and currently applicable laws and regulations.
Climate Solutions
+86 400 061 9988
FAQ
Q: What is the purpose of the Thermot actuator?
A: The Thermot actuator is designed to control the flow of liquids or gases in heating, cooling, or ventilation systems based on temperature settings.
Q: Can the Danfoss 88H219 be used with both 24V and 230V supplies?
A: Yes, the Danfoss 88H219 is compatible with both 24V AC/DC and 230V AC supplies, offering flexibility in installation options.
Q: What is the IP41 enclosure rating for?
A: The IP41 enclosure rating indicates that the product is protected against solid objects greater than 1mm and dripping water, suitable for indoor use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>