Jiahe HS-V22 3 in 1 Fast Wireless Charger User Manual

Jiahe HS-V22 3 in 1 Fast Wireless Charger

Product Information

Specifications:

• Model: XYZ-1000
• Power: 120V, 60Hz, 1000W
• Capacity: 5 liters
• Materials: Stainless steel, BPA-free plastic
• Dimensions: 10″ x 12″ x 15″

Product Usage Instructions

1. Initial Setup:
   Before first use, wash all removable parts with warm soapy water and dry thoroughly. Ensure the main unit is placed on a flat, stable surface.

2. Filling the Reservoir:
   Fill the reservoir with water up to the maximum fill line indicated. Do not exceed this limit to prevent spillage.

3. Adding Ingredients:
   Add your desired ingredients into the reservoir, making sure not to overfill beyond the recommended capacity.

4. Setting the Temperature:
   Use the temperature control dial to set your desired cooking temperature. Refer to the recipe guidelines for specific temperature recommendations.

5. Cooking Process:
   Once all ingredients are added and the temperature is set, turn on the appliance and let it cook for the recommended time duration. Stir occasionally for even cooking.

Frequently Asked Questions (FAQ):

• Q: Can I use this product for baking?
  A: No, this product is designed for cooking savory dishes and is not suitable for baking.

• Q: Can I put the removable parts in the dishwasher?
  A: Yes, all removable parts are dishwasher-safe for easy cleaning.

Note:
To ensure charging 3 devices safely and efficiently, you must use a 9V/2.7A adapter and quick charge cable, (if not use the appropriate adapter and quick charge cable, the charger may not charge phone, or may not charge 3 devices simultaneously or may even damage the charger).

Product Appearance

Product Introduction

• The 3-in-1 wireless charger, a compact charging house, powered from only one outlet, can charge 3 devices simultaneously. When charging your mobile phone, apple watches, and your AirPods 2 or AirPods Pro or some other TWS, just put them on, and wireless charging will automatically start, all this will make your desk clean and tidy, and make your life easier.
• The charger is so space-saving design that can help you integrate your mobile phone intelligently and live very well, especially for Apple users. Besides, it is fashion that the light ring is so shining showing the charging state.

Operation Steps

1. Connect the charger to a 9V2.7A adapter through a type-C quick charge cable to switch on the power;
2. Put your phone on then charge it;
3. Put the apple watch on and suck it up to charge;
4. Put your earphone case on and charge.

LED light instructions

• Power on:
  Flashing once

• Standby:
  The white indicator is on for 30 seconds and the indicator is off

• Charge:
  The running light lasts for 60 seconds, then off

• Full:
  The green light is steady on

• Foreign body:
  The red light is blinking

Applicable Devices

1. Smart Phone:

2. Apple: iPhone 15, iPhone 15 Plus, iPhone 15 Pro, iPhone 15 Pro Max, iPhone 14, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 13, iPhone 13 mini, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 12, iPhone 12 mini, iPhone 12 Pro, iPhone 12 Pro Max iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone X, iPhone Xs, iPhone Xs Max, iPhone XR, iPhone 8, Phone 8 Plus

3. Samsung Galaxy S: 23, 23 Ultra, 22, 22 Ultra, 21 5G, 21+ 5G, 21 Ultra 5G, FE 5G, 20 5G, 20+ 5G, 20 Ultra 5G, 10, 10+, 10e, 9, 9*, 8, 8+, 7, 7 edge, 6, 6 edge, 6 edge+, 6 G9209, 6Active; Galaxy Note: 10, 10e, 10+, 9,8, 7, 6, 5;

4. LG: G2(VS980, Verizon version), G3, G6, G6+, G7, G7 ThinQ, G7+ ThinQ, G8, G8ThinQ, V30, V30+, 35, V40 ThinQ, V50, V50 ThinQ, LG Lucid2(VS870), LG Optimus F5 (As870), LG Optimus Vu 3, Spectrum 2, Optimus G Pro, OptimusVull, Optimus LTE 2, etc.

5. MOTOROLA: Droid Turbo, Droid Turbo2, Droid 5, Moto Maxx, Ultra M, Moto X Force.

6. Huawei: Mate 60, Mate 60 Pro, Mate 60 Pro+, P60, P60 Pro, P50, P50 Pro, Mate 40 Pro, Mate 40 Prot, Mate 40 RS, Mate 30, Mate 30 RS, Mate 30 Pro, Mate 30E Pro, P40 Pro, P40 Prot, P30 Pro, Mate 20 Pro, Mate RS

7. Xiaomi: 11 Ultra, 11 Pro, 11, 10s, MIX 4, 10. 10 Pro, 9, 9 Pro, 9X, MIX 3, MIX 2S Including other devices with a wireless charging receiver built-in; other devices need to add a wireless charging receiver (Note: All devices must meet the Qi standard).

8. Smart Watch:
   Apple: iWatch S1, S2, S3, S4, S5, S6, S7, S8, S9, SE.

9. TWS bluetooth earphones:
   Apple AirPods 2, AirPods 3, AirPods 4, AirPods Pro Samsung Galaxy Buds/Budst/Buds Pro/Buds Live; Huawei Freebuds 2/3/4i/Pro; and more TWS(with wireless charging case).

Product Specification

• Input: 9V/2A, 9V2.7A
• Phone Output: 15W/10W/7.5W/5W
• Watch Output: 2.5W
• Earphone Output: 3W
• Input interface: Type-Cport
• Transmission Distance(Phone): <8mm
• Conversion Rate(Phone): ≥ 73%
• Product Size: 98.3 x24.7 x95.8 mm

Accessories List

• Wireless Charger * 1
• Type-C quick charge cable * 1
• User manual * 1

Attention

1. Please keep the charger away from water or other liquids;
2. If you need to clean the charger, please make sure it is not connected power supply;
3. Using Environment temperature remains 0-45°C
4. The charging environment of the smartphone will not be <55°C(<131°F)

Answer questions

1. If you’re experiencing interrupted or slow charging, check the following:
2. The back of your phone should not have any metal, pop sockets, or credit cards,
3. Put the phone in the center of the charging surface (this lets the charging coil in your phone line up with the one inside the wireless charger).
4. The wireless charging coil on Sony phones is located slightly below the center.
5. Phone cases should be no thicker than 5 mm for effective charging.
6. Check whether the adapter is a QC3.0 fast charger.
7. If you’re failing to charge your device, please try out the following:
8. Please restart your cell phone and test with another USB cable.
9. Please check whether the indicator turns on or not.
10. Please check whether the Adapter is a Quick Charger (Output:9V/2.7A) or not, The iPhone original adapter does not match the wireless charger.
11. Please check your Phone case thickness(<5mm). Metal ring or Magnetic Pad will not be available.
12. If you’re using the recommended wireless charger with the 9V/2.7A adapter and have removed any potential charging obstructions, but are still experiencing issues, try:
13. Replacing the cable connecting your wireless charger.
14. Rebooting your phone.
15. Unplug the adapter and reinsert it.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>