tekkiwear AT0037 Mini Portable Bluetooth Thermal Printer Instruction Manual
- July 22, 2024
- TeKKiWear
Table of Contents
Mini portable Bluetooth thermal printer – AT0037
Instruction Manual
Product diagram
- Power Button
- Charging Cable
- USB port
Power Indicator Status
– Green light on: fully charged / normal use.
– Red light on: charging / Lack of paper / Overheating / Open lid.
– Red light flashing: low power, will cause printing too clear, please charge
timely.
– Orange light: has entered debugging mode. Press and hold the power button to
turn off the power and exit debug mode.
Open / Close cover and change paper
a: Front cover
b: Print side up
c: Back cove
d: The end of the paper exits the printed
a: Press and hold 3 seconds to turn on/off
- Open the cover
- Load the paper
- Close the cover
- Turn on/off (by pressing and holding for 3 or 4 seconds).
Download Windows Application / Driver
Download and Connect Printer
- APP: Scan the QR code for your corresponding platform or enter the APP store or Google play store to search for Dingdang Classmates ( Luck Jingle ).
APP for Android
APP for iOS
• Windows application / driver:
Visit the official product website:
http://www.xmjprt.com/112.html?pid=2934187&_t=1584708323 and enter the downloads tab or scan the QR code to be directed to the product’s driver and software download center.
Connection
– Mobile: Log into the APPLICATION and follow the instructions to connect to
the printer via Bluetooth; or double-click the power button on the printer to
print the QR code and use the application to scan the QR code to connect.
– Computer: Use the USB data cable to connect the printer with the computer,
install the driver and configure it properly. It can be used as a normal
printer or can work with label editing software.
Loading Instructions
Charging Input
– Micro USB input interface;
– 5V 2A input charging, you can use cell phone charging adapter or connect to
computer USB port to charge;
– It is recommended to fully charge the first time after purchase;
– Lithium-ion battery capacity: 1000mAh / 7.4Wh;
– Charge the printer at least once every 3 months to prevent the lithium
battery from natural degradation due to long time without charging.
Cleaning the printhead
- Turn off the printer and remove the paper inside;
- Wipe with a cotton cloth or cotton swab with alcohol and rub gently along the center to the periphery of the print head;
- Do not use the printer immediately after cleaning the printhead. Wait 1 to 2 minutes for the alcohol to evaporate completely.
NOTE: Do not touch the printhead directly to avoid damage, especially after printing to prevent overheating.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>