MAXIM LIGHTING 10336 LED Pendant Paramount Instruction Manual

MAXIM LIGHTING 10336 LED Pendant Paramount

Product Specifications

• Item/Model Number: 10336 Paramount 21 LED Pendant
• Lamping | Ampoule: LED 32W (Included) 1 of (5)

Product Usage Instructions

Assembly and Installation

1. Read the instructions carefully before assembling the= product.
2. Handle the package with care to avoid damaging the components inside.
3. Remove all packaging materials and keep them for future use.
4. Ensure a clean, level, and spacious assembly area away from hard surfaces that may damage the product.
5. Check that you have all the necessary contents for assembly.
6. Assemble the product close to the installation area.

Product Care and Maintenance

1. Avoid over-tightening screws and bolts to prevent damage to the threads.
2. Keep the product away from children and do not let them play with it.
3. Use appropriate cleansers for respective surfaces like glass cleaner, stone polish, and wood polish.
4. Clean with a cloth and mild detergent; avoid abrasive or harsh cleaners.
5. Periodically check and tighten screws every 90-180 days.

Safety Precautions

1. Disconnect the product from the power source before assembly or cleaning.
2. Switch off, unplug, and allow the bulb to cool before replacing or cleaning it.
3. Ensure the product cord is not torn or frayed before use.
4. Wire connections must be made to a low voltage driver and not directly to live wires.

Frequently Asked Questions (FAQ)

• Q: Can children play with this product?
  

  • A: No, children should not play with this product for safety reasons.

• Q: How often should screws be checked and tightened?
  

  • A: Screws should be checked and tightened every 90-180 days to ensure stability.

• Q: What type of cleaner should be used for different surfaces?
  

  • A: Use appropriate cleansers like glass cleaner, stone polish, and wood polish for respective surfaces.

Item/Model Number: 10336
Paramount 21″ LED Pendant

Lamping | Ampoule: LED 32W ( Included )

Please consult a qualified electrician prior to install

Made in China

LED LOW-VOLTAGE INSTRUCTIONS

Before Getting Started

• Read the instructions carefully prior to assembling the product.
• When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
• Carefully remove all packaging materials and retain for future use.
• Keep all hardware parts and packaging out of reach of small children.
• Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
• Ensure that you have all required contents for complete assembly.
• Take care when lifting. Assemble the product in close proximity to where you intend to install it.
• Do not over tighten the screws and bolts as this may damage the threads.
• Do not let children play with this product.

Risk of suffocation!
Keep packaging materials away from children.

Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the product.

Caution there is a risk of shock!
Disconnect from power source before assembling or cleaning.

• Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
• Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
• Check the product cord to be sure is free torn or frayed.

WARNING: Wires must to be connected to low voltage driver and should not be connected directly to live wire or a short may occur.

Cleaning & Maintenance

• On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
• For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
• Clean with soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
• Periodically (every 90-180 days) make sure that the screws are fully tightened.
• Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to tade.

PARTS
Before getting, started, ensure the package contains the following components:

This fixture is equipped with an LED driver, please refer to the Wiring Diagram for more details

ITEM/MODEL: 10336

WIRING DIAGRAM DIMMER COMPATIBILITY
MUST be installed by an experienced professional
CRITICAL KNOWLEDGE of electronic lightening systems required

IMPROPER WIRING and/or INCORRECT DIMMER use can cause CATASTROPHIC DAMAGE!
THIS FIXTURE MUST BE INSTALLED with a COMPATIBLE DIMMER SWITCH

DO NOT CUT FACTORY-MADE CONNECTIONS

VERIFIED LIST OF TESTED DIMMERS

Lutron Diva DVCL-153P
Lutron Diva DVELV-300P

GENERAL COMPATIBILITY

• TRIAC / FORWARD PHASE
• ELV / REVERSE PHASE
• 0-10V/ LOW VOLTAGE

Work at 120-277VAC

Due to inrush current, wattage should not exceed 150W on a 600W dimmer

IMPORTANT!
If the control is not paired properly to LED fixtures, irreparable damage may occur.
If the dimmer you are using is not listed here, consult a lighting professional or view our Dimming Compatibility Chart online: https://www.maximlighting.com/led-dimmer

MUST be installed by an experienced professional
CRITICAL KNOWLEDGE of electronic lighting systems required

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>