MAXIM LIGHTING 10334 LED Pendant Paramount Installation Guide

MAXIM LIGHTING 10334 LED Pendant Paramount

Specifications :

• Item/Model Number: 10334 Paramount 16 LED Pendant
• Lamping | Ampoule: LED 19.5W (Included) 1 of (5)

Product Usage Instructions

Assembly:

1. Read the instructions carefully before assembling the product.
2. Open the package with care to avoid damaging components inside.
3. Remove all packaging materials and keep them for future use.
4. Choose a clean, level, and spacious assembly area to prevent product damage.
5. Ensure you have all necessary contents for assembly.

Installation :

1. Assemble the product close to where you intend to install it.
2. Do not overtighten screws and bolts to avoid damaging threads.
3. Keep children away from the product and its packaging materials.
4. Disconnect from the power source before assembling or cleaning the product.

Maintenance :

1. Use appropriate cleansers for respective shade surfaces (glass cleaner, stone polish, wood polish).
2. Clean with a cloth and mild detergent; avoid abrasive or harsh cleaners.
3. Periodically check and tighten screws every 90-180 days.

Safety Precautions :

1. Ensure wires are connected to a low voltage driver, not directly to live wire to prevent shorts.
2.  Avoid prolonged exposure to heat sources to prevent glazing, melting, or color fading.

Cleaning Tips:

1. Use talc powder on polished surfaces to reduce fingerprints and smudges.
2. Clean with a clean, soft, dry cloth that won’t scratch the surface when dusting.

FAQ :

• Q: Can children play with this product?
  A: No, children should not play with this product. Keep it away from them.

• Q: How often should I tighten the screws?
  A: Periodically check and tighten the screws every 90-180 days.

• Q: What type of cleansers should I use for different shade surfaces?
  A: For glass, stone, and wood shades, use appropriate cleansers like glass cleaner, stone polish, and wood polish respectively.

Item/Model Number: 10334
Paramount 16″ LED Pendant

• Lamping : LED 19.5W ( Included )
• Please consult a qualified electrician prior to install

LED LOW-VOLTAGE INSTRUCTIONS

Before Getting Started

• Read the instructions carefully prior to assembling the product.
• When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
• Carefully remove all packaging materials and retain for future use.
• Keep all hardware parts and packaging out of reach of small children.
• Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
• Ensure that you have all required contents for complete assembly.
• Take care when l Assemble the product in close proximity to where you intend to install it.
• Do not over the screws and bolts as this may damage the threads.
• Do not let children play with this product
• Risk of suffocation!
  Keep packaging materials away from children.

Lamp Care Instructions

• Carefully read through the instruction sheet before assembly and using the product.
• Caution there is a risk of shock! Disconnect from power source before assembling or cleaning.
• Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
• Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
• Check the product cord to be sure is free torn or frayed.
• WARNING: Wires must to be connected to low voltage driver and should not be connected directly to live wire or a short map occur.

Cleaning & Maintenance

• On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
• For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
• Clean with soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
• Periodically (every 90-180 days) make sure that the screws are fully tightened.
• Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.

 PARTS

• Before getting, started, ensure the package contains the following components:

This fixture is sequined with an LED driver, please refer to the Wiring Diagram for more details

WIRING DIAGRAM

MUST be installed by an experienced professional
CRITICAL KNOWLEDGE of electronic lightening systems required

• IMPROPER WIRING and/or INCORRECT DIMMER use can cause CATASTROPHIC DAMAGE!
• THIS FIXTURE MUST BE INSTALLED with a COMPATIBLE DIMMER SWITCH DO NOT CUT FACTORY-MADE CONNECTIONS.
• SCHEMATIC FOR GENERAL REFERENCE ONLY
• VERIFIED LIST OF TESTED DIMMERS Lutron Diva DVCL-153P Lutron Diva DVELV-300P
• GENERAL COMPATIBILITY TRIAC / FORWARD PHASE ELV / REVERSE PHASE 0-10V/ LOW VOLTAGE Work at 120-277VAC Due to inrush current, wattage should not exceed 150W on a 600W dimmer
• IMPORTANT! If the control is not paired properly to LED fixtures, irreparable damage may occur. If the dimmer you are using is not listed here, consult a lighting professional or view our Dimming Compatibility Chart online: https://www.maximlighting.com/led-dimmer
• MUST be installed by an experienced professional CRITICAL KNOWLEDGE of electronic lighting svstem required
• © 2024 MAXIM LIGHTING

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>