SANUS BLL2 Elite Super Slim Fixed Position TV Wall Mount Instruction Manual
- July 21, 2024
- SANUS
Table of Contents
- SANUS BLL2 Elite Super Slim Fixed Position TV Wall Mount
- Specifications
- Product Usage Instructions
- IMPORTANT SAFETY INSTRUCTIONS
- Tools Needed
- Dimensions
- BEFORE YOU BEGIN
- MOUNTING
- Parts and Hardware for STEP 1
- STEP 2 ATTACH WALL PLATE TO WALL
- STEP 3 ATTACH TV TO WALL PLATE
- ADJUSTMENTS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SANUS BLL2 Elite Super Slim Fixed Position TV Wall Mount
Specifications
-
TV Weight Limit (including accessories):
- Wood stud and Solid Concrete or Concrete Block Walls: 125 lbs. (56.6 kg)
- Steel Stud Walls: 150 lbs. (68.0 kg)
-
Wall Construction: Wood studs, Solid concrete, Concrete block,
Steel studs -
Tools Needed:
- Tape Measure
- Pencil
- Stud Finder Awl
- 1/8 in. (3 mm) Wood Drill Bit
- Level
- Screwdriver
- Electric Drill
- 3/8 in. (10 mm) Concrete Drill Bit
- Hammer
- 7/16 in. (12 mm) Socket Wrench
- 1/2 in. (13 mm) Steel Drill Bit
-
Dimensions (in. [mm]):
- TV Interface: 24.06 x 15.75 [611.0 x 400.0]
- Wall Plate: 24.00 x 16.00 x 8.99 [609.6 x 406.4 x 228.3]
- Fully Assembled Mount: 26.00 x 17.72 x 23.62 [660.5 x 450.0 x 600.0]
Product Usage Instructions
Before You Begin
- Remove the stand from your TV if attached.
- Install any accessories that require TV removal prior to assembly.
- Protect the face of your TV when laying it down for installation on a soft, clean surface.
Step 1: Attach TV Bracket to TV
WARNING: This product contains small items that could be a choking
hazard if swallowed. Verify all parts are included before starting assembly.
FAQ
-
Q: Can this product be installed on drywall alone?
A: No, this product is designed ONLY to be installed into wood stud, solid concrete, concrete block, or steel stud walls. -
Q: What should I do if my TV weight exceeds the limit specified?
A: If your TV, plus accessories, weighs more than the specified limit, this mount is not compatible. Visit SANUS.com or contact customer service to find a compatible mount.
WE’RE HERE TO HELP
Want to watch a video that shows how easy this DIY project will be?
Get it right the first time. HeightFinder™ shows you where to drill.
Our US-based install experts are standing by to help.
Watch it now at: SANUS.com/2528
Check it out at: SANUS.com/1172
Call us at:
800-359-5520
Or, chat at: SANUS.com/chatSP
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ENTIRE MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS
Please read through these instructions completely to be sure you’re
comfortable with this easy install process. Check your TV owner’s manual to
see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of
the installation, assembly or use of this product, contact Customer Service.
CAUTION: Avoid potential personal injuries and property damage!
- This product is designed ONLY to be installed into wood stud, solid concrete or concrete block or steel stud walls.— DO NOT INSTALL INTO DRYWALL ALONE — DRYWALL ALONE WILL NOT HOLD THE WEIGHT OF YOUR TV.
- This product is designed for INDOOR USE ONLY.
- The wall must be capable of supporting five times the weight of the TV and mount combined.
- Do not use this product for any purpose not explicitly specified by manufacturer.
- Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
TV Weight Limit (including accessories) DO NOT EXCEED
For wood stud and Solid Concrete or Concrete Block Walls
For Steel Stud Walls
If your TV, plus accessories, weighs MORE than indicated, this mount is NOT
compatible.
Visit SANUS.com or call customer service to find a
compatible mount.
Wall Construction
ONLY install on these acceptable wall types.
? Unsure
Call Customer Service
CAUTION:
DO NOT install in drywall alone
Drywall alone will NOT hold the weight of your TV.
Tools Needed
Dimensions
BEFORE YOU BEGIN
Remove the stand from your TV — if attached.
Install any accessories you may have purchased, if they requireTV removal
prior to assembly. The TV is removable for future accessory purchases.
Protect the face of your TV when laying it down for installation.
MOUNTING
STEP 1
ATTACH TV BRACKET TO TV
WARNING:
This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any
parts are missing or damaged, do not return the damaged item to your dealer;
contact Customer Service. Never use damaged parts!
NOTE: Not all hardware included will be used.
Parts and Hardware for STEP 1
Select TV Screw Diameter
Only one screw size fits your TV.
NOTE: If your TV included inset spacers or adapters, use them UNDER the mount hardware.
Select TV Screw Length / Spacers
NO SPACER
- Flat Back TV [TV brackets lay flat on your TV]
SPACER NEEDED
- Flat Back TV with Extra Space Needed [for deep inset holes or cable interference]
- Rounded or Irregular Back TV [TV brackets NOT resting flat on your TV]
CAUTION: Verify adequate thread engagement with your screw 01 , washer 02 , spacer 03 combination AND TV bracket 04 .
- Too short will not hold your TV.
- Too long will damage your TV.
Attach TV Bracket Assembly to TV
STEP 2 ATTACH WALL PLATE TO WALL
WARNING: This product contains small items that could be a choking hazard
if swallowed. Before starting assembly, verify all parts are included and
undamaged. If any parts are missing or damaged, do not return the damaged item
to your dealer; contact Customer Service. Never use damaged parts!
NOTE: Not all hardware included will be used.
Parts and Hardware for STEP 2
For WOOD STUD INSTALLATIONS Follow 2A on PAGE 7
For CONCRETE INSTALLATIONS Follow 2B on PAGE 8
For STEEL STUD INSTALLATIONS Follow 2C on PAGE 9
STEP 2A Wood Stud Installation
CAUTION: Avoid potential personal injury or property damage!
- Drywall covering the wall must not exceed 5/8 in. (1.5 cm)
- Minimum wood stud size: nominal 2 x 4 in. (5.1 x 10.2 cm) actual 1 ½ x 3 ½ in. (3.8 x 8.9 cm)
- Minimum horizontal space between fasteners:16 in. (40.6 cm)
- Stud centers must be verified
CAUTION: Avoid potential personal injury or property damage!
All four lag bolts 07 MUST BE firmly tightened to prevent unwanted movement of
the wall plate 06 . Ensure the wall plate is securely fastened to the wall
before continuing on to the next step.
STEP 2B Solid Concrete or Concrete Block Installation
CAUTION: Avoid potential personal injury or property damage!
- Mount the wall plate 06 directly onto the concrete surface
- Minimum solid concrete thickness: 8 in. (20.3 cm)
- Minimum concrete block size: 8 x 8 x 16 in. (20.3 x 20.3 x 40.6 cm)
- Minimum horizontal space between fasteners: 16 in. (40.6 cm)
CAUTION: Avoid potential personal injury or property damage!
All four lag bolts 07 MUST BE firmly tightened to prevent unwanted movement of
the wall plate 06 . Ensure the wall plate is securely fastened to the wall
before continuing on to the next step.
STEP 2C Steel Stud Installation
CAUTION: Avoid potential personal injury or property damage!
- Studs must be at least 2×4 / 25 ga.
- If back side of wall is unfinished, drywall must be installed to a minimum of one stud left and right of the stud(s) being used to install the mount
- Drywall must be a minimum of 1/2 in. (13 mm) thick on each side of the studs, and a minimum clearance of 1 ⅞ in. (48 mm) behind the wall is required
- This product must be centered on the studs
- Stud type and structural strength must conform to the North American Specification for the Design of Cold-Formed Steel Structural Members [362 S 125 18, C-Shape, S – Stud Section]
- Drywall must be secured to studs with screws 12 in. (304.8 mm) on center
CAUTION: Avoid potential personal injury or property damage!
All four screws S2 MUST BE firmly tightened to prevent unwanted movement of
the wall plate 06 . Ensure the wall plate is securely fastened to the wall
before continuing on to the next step.
STEP 3 ATTACH TV TO WALL PLATE
HEAVY! You may need assistance with this step.
MANAGE CABLES
-
Pull down and hold both release cords R while gently pulling the bottom of the TV away from the wall until the kick stands fall into place.
CAUTION: To prevent breaking the locking latch: always pull and hold release cords R down while pulling the TV away from the wall. -
Temporarily rest the TV on the kick stands K while assembling the cables on the TV.
CAUTION: TV is not secured to the wall when it is in the kick stand position. Assistance is recommended for this step. -
Lift the kick stands K up while holding the TV.
-
Gently rest the TV back until the brackets click and lock the TV in place.
ADJUSTMENTS
REMOVING THE TV
HEAVY! You may need assistance with this step.
-
Disconnect all cables from the TV.
-
To unlock the TV from the wall plate: Pull down and hold both release cords R while gently pulling the bottom of the TV away from the wall.
CAUTION: Avoid potential personal injury or property damage! To prevent breaking the locking latch: always pull and hold the release cords R down while pulling the TV away from the wall. -
Lift the TV up and off of wall plate 06 .
NOTE: To rehang the TV, follow the procedures in STEP 3 on PAGE 10.
Thank you for choosing SANUS Elite!
Please take a moment to let us know how we did:
Call us at: US: 800-359-5520
Or, chat at: US: SANUS.com/chatSP
Email: info@legrand.com
SANUS.com
Legrand AV Inc. and its affiliated corporations and subsidiaries
(collectively, “Legrand”), intend to make this manual accurate and complete.
However, Legrand makes no claim that the information contained herein covers
all details, conditions, or variations. Nor does it provide for every possible
contingency in connection with the installation or use of this product. The
information contained in this document is subject to change without notice or
obligation of any kind. Legrand makes no representation of warranty, expressed
or implied, regarding the information contained herein. Legrand assumes no
responsibility for accuracy, completeness or sufficiency of the information
contained in this document.
©2022 Legrand AV Inc. All rights reserved. SANUS is a brand of Legrand. SANUS
and the SANUS logo are registered trademarks of Legrand.
Legrand AV Inc. • 6436 City West Parkway • Eden Prairie, MN 55344 USA
References
- Apache2 Debian Default Page: It works
- HeightFinder | SANUS
- HeightFinder | SANUS
- SANUS | #1 Brand of TV Wall Mounts in the U.S.
- HeightFinder | SANUS
- HeightFinder | SANUS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>