ocioc OC22-WE-3X-FO Wind Fan Lantern Owner’s Manual

ocioc OC22-WE-3X-FO Wind Fan Lantern

TECHNICAL SPECIFICATIONS

• Ceiling Fan Light
• OC22-WE-3X-FO
• OC22-BK-3X-FO
• OC32-WE-3X-FO
• OC32-BK-3X-FO
• Input : AC120V-60Hz
• Power : Fan 30W+ Light 15W
• Size :
  • Diameter 22*H9 Inch
  • Diameter 32*H9 Inch

PACKING LIST

Ensure that after the fan is installed, its lowest point is no less than 2.1 meters from the ground.

INSTALLATION GUIDE

1. Remove the motor base.

2. Insert the fan blades into the motor as shown in the diagram.

3. Rotate the motor to locate the screw holes on the fan blades and secure them with screws.

4. Flip the motor to the other side and secure the fan blades again with screws.

5. Connect the wires between the light and the motor.

6. Slide the light fixture flat from left to right and insert it onto the mounting bracket on the motor.

7. Installing the controller:
   Connect the two wire sets from the motor and the controller, matching wire colors. AC Input 120V/60Hz

8. Mount the base onto the ceiling.

9. Hung the whole ceiling fan to the mounting base by the safety string.
   Notice :

10. Please be sure the ceiling is thick enough to drive the screws.

11. The whole fan weighs 7lb, please be sure the ceiling can shoulder freely.

12. Connect the AC cables and ground wire.

13. Hang the whole ceiling fan to the ceiling mounting base.

14. Tighten the fan, installation is done.

MADE IN CHINA

zhongshan Ousike Light Co.,Ltd
ociocservice@outlook.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>