INVCALL TX2IN-US59 Cell Phone Signal Booster User Manual
- July 20, 2024
- INVCALL
Table of Contents
- TX2IN-US59 Cell Phone Signal Booster
- Product Specifications:
- Product Usage Instructions:
- Consumer Signal Booster Warning Label:
- IC Statement:
- Electrical Specification:
- Warranty:
- Q: Do I need to register my booster with my wireless
- Q: What is the warranty coverage for the product?
- Q: Can I modify the antennas or cables of the booster kit?
TX2IN-US59 Cell Phone Signal Booster
“`html
Product Specifications:
-
Model: TX21N-US59
-
Frequency Band: B13, B5, B4, B25, B2, B7,
B66 -
Max. Gain: 85dB
-
Max. Output Power: Uplink: 64dBm, Downlink:
64dBm
Product Usage Instructions:
Consumer Signal Booster Warning Label:
If the booster has the warning label, ensure that you have
permission from your wireless provider before use.
IC Statement:
Ensure compliance with FCC rules and do not modify any
components without approval.
Electrical Specification:
Refer to the provided electrical specifications for detailed
information on frequency bands and output power.
Warranty:
Enjoy a 2-year manufacturer warranty and additional benefits by
registering the booster on the official website within the
specified time frame.
Frequently Asked Questions (FAQ):
Q: Do I need to register my booster with my wireless
provider?
A: Yes, it is recommended to register your booster with your
wireless provider before use.
Q: What is the warranty coverage for the product?
A: The product comes with a 2-year manufacturer warranty, with
additional benefits available upon registration on the official
website.
Q: Can I modify the antennas or cables of the booster kit?
A: No, modifying the antennas, cables, or other accessories
without approval may void the warranty and FCC compliance.
“`
7;86
Consumer Signal Booster Warning Label:
If the booster has this label (all consumer boosters sold after March 1, 2014, and some sold prior will have this label):
r
This is a CONSUMER device.
1
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have
your provider s consent. Most wireless providers consent to the use of signal
boosters. Some providers may not consent to the use of this device on their
network. If you are unsure, contact your provider. You MUST operate this
device with approved antennas and cables as specified by the manufacturer.
Antenna MUST be installed at least 20 cm (8 inches) from any person. You MUST
cease operating this device immediately if requested by the FCC or a licensed
wireless service provider. WARNING. E911 location information may not be
provided or may be inaccurate for calls served by using this device. This
device may be operated ONLY in a fixed location for in-building use.
Note: Verizon Wireless, AT&T, Sprint, and T-Mobile have approved all boosters
that contain the label, so you do not need to get approval again
1.Verify that your provider has given permission (e.g., AT&T, Sprint, T-M
obile, Verizon) , or else get permission from your wireless provider to use
it. 2.Register your booster with your wireless provider before turning it on.
Each wireless provider that gives permission for boosters to be used must
provide a free registration system.
Note: Verizon Wireless, AT&T, Sprint, and T-Mobile have approved all boosters
that contain the label, so you do not need to get approval again. You can
learn more about the FCC’s new rules by following the link:
https://www.fcc.gov/wireless/bureau-divisions/mobility-division/signal-
boosters/consumer-signal-boosters NotesBooster transmitting in 1710-1755 MHz
should be install/operate in one of two ways: (i) the antenna for the device
must be installed to comply with the 10 meter above ground maximum antenna
height limitation OR (ii) the antenna for the device has a 10 meter above
ground maximum antenna height limitation when the device is used with a
handset that covers the 1710-1755 MHz band and that owners could be subject to
potential FCC enforcement action for noncompliance.
IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions: (l)This device
may not cause interference; and (2) This device must accept any interfer-ence,
including interference that may cause undesired operation of the device. The
term IC: before the certification/registration number only signifies that the
Industry Canada technical specifications were met. This product meets the
applicable Industry Canada technical specifications. This equipment complies
with ISED radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body. Cet appareil contient des
emetteurs/recepteurs exemptes de licence conformes aux RSS (RSS) d’lnnovation,
Sciences et Developpement economique Canada. L’exploitation est autorisee aux
deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage,
et (2) l’utilisateur de l’appareil doit accepter tout brouillage
radioelectrique subi, meme si le brouillage est susceptible d’en
compromettre le fonctionnement. Le terme IC : devant le numero de
certification/d’enregistrement signifie uniquement que les specifications
techniques d’lndustrie Canada ont ete respectees. Ce produit repond aux
specifications techniques applicables d’lndustrie Canada. Cet equipement est
conforme aux limites d'exposition aux rayonnements ISED etablies pour un
environnement non controle. Cet equipement doit etre installe et utilise avec
une distance minimale de 20 cm entre le radiateur et votre corps.
Electrical Specification:
Model
Frequency Band
812,17
B13
TX21N-US59
B5
B4
B25,2
812,17
B5
TX21N-CA60
B66,4
B25,2
B7
Max. Gain
85,12,17,13 B2,4,25,7,66
Max. Output Power
Uplink
698-716MHz 776-787MHz 824-849MHz 1710-1755MHz 1850-1915MHz 698-716MHz
824-849MHz 1710-1780MHz 1850-1915MHz 2500-2570MHz
:::::64dB 72dB 20d8m
Downlink 728-746MHz 746-757MHz 869-894MHz 2110-2155MHz 1930-1995MHz 728-746MHz
869-894MHz 2110-2200MHz 1930-1995MHz 2620 -2690MHz
64dB :::;72dB 10dBm
Warranty
30-day money-back guarantee 90-day free replacement 2-year manufacturer
warranty
We provide a standard warranty period for each items from the date of
purchase, some cases may have an extended warranty, please contact our service
for more detail. This limited warranty provided by the manufacturer in no way
affects a potential statutory warranty provided by law.
You can enjoy an extra 1-year warranty and priority customer support after
registering the booster on our website.
Note: 1. Only for customers that bought the product at FULL PRICE through our
Official Seller on Amazon.com. 2.The 3-year Warranty is only for the MAIN
BOOSTER, EXCLUDING antennas, cables and power supply. 3.To register, please go
to our website to active your warranty: https://www.invcall.com/pages/active-
warranty
Any questions, please contact us.
wecare@invcall.com www.invcall.com
Notes: The above model antennas are suitable for TX2IN-US59 booster
Warning: Unauthorized antennas cables and/or coupling devices ae prohibited by FCC rules. Please contact FCC for details: 1-888-CALL-FCC
The antenna, cables, and other accessories of the booster kits shall not be modified without the approval of the Phonetone Technology (Shenzhen) Co., Ltd.
otherwise it shall be deemed invalid.
Any questions, please contact us.
wecare@invcall.com www.invcall.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>